To do that, log into Pi-Star via SSH, and then run these three commands: Code: Select all sudo systemctl stop ntp.service sudo ntpdate pool.ntp.org
How do I connect to pi-star?
May 10, 2019 · Quick and easy! Use this procedure to get into the Pi-Star dashboard by scanning for the hotspot IP address.https://www.advanced-ip-scanner.com/
How do I set up a pi-star hotspot?
Nov 21, 2018 · Auto AP is used for the initial configuration of Pi-Star, including adding the name and password for your actual WiFi network. Once you've done that initial configuration, then you can reboot your hotspot, and connect your computer to Pi-Star via your actual WiFi network using http://pi-star/ or http://pi-star.local/. (In some rare cases, you might need to find the hotspot's IP …
How do I connect to my Raspberry Pi?
Feb 26, 2021 · Open a command line. Connect your Pi to your WiFi (or wired) network. Then, open a new command line: Enable SSH. Get the username and password. Use the SSH command.
How do I use PI-star 4.1.x?
Mar 26, 2022 · For example, there are specific logs in var/log/pi-star/ for ircDDBGateway, MMDVM, etc. Thanks to Luis, CT1DVM, for pointing this out. To see a list of the logs available, log into Pi-Star via SSH and type: ls -l /var/log/pi-star; For the overnight updates: /var/log/unattended-upgrades/unattended-upgrades.log.
How do I find the Pi Star IP address?
0:101:33Discover IP Address Pi-Star/ZUMspot - YouTubeYouTubeStart of suggested clipEnd of suggested clipThing you need to do is download an app and the app you want to download from the App Store is thisMoreThing you need to do is download an app and the app you want to download from the App Store is this one from Tildy soft.
How do I connect to Pistar?
6:0927:57Pi Star Initial Setup 4.1.2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you're going to go to the wi-fi builder click on the wi-fi builder. And you're going to type inMoreAnd you're going to go to the wi-fi builder click on the wi-fi builder. And you're going to type in the ssid. That's the broadcasted name of your wi-fi.
How do I access ZumSpot?
In the Radio/Modem Type: dropdown, choose 'ZumSpot – Raspberry Pi Hat (GPIO)'Enter your call sign in Node Callsign.Enter your DMR ID in CCS7/DMR ID.Enter your desired RF frequency in Radio Frequency.Enter 'USA for Country.Choose 'America/Los Angeles' for System Time Zone.Sep 21, 2017
Can not connect to PI star?
The most reliable solution I've found is to shut down Pi-Star, power off the hotspot, and then quickly power it back on. After that, it often starts up properly in Read-Only mode. Sometimes it works to re-run Pi-Star Update and then Pi-Star Upgrade (even if you're on the latest version).Feb 10, 2022
How do I reset my PI star?
0:221:24PiStar Jumbo Hotspot -Factory reset got me back on Ref1C - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo in the end i decided to just hit configuration go here to where it says factory reset. So i resetMoreSo in the end i decided to just hit configuration go here to where it says factory reset. So i reset that uh it still came back on on the same ip address so i could still find it on my on my computer.
How do you set up a PI star for BrandMeister?
2:476:11Pi-Star DMR Hotspot Setup on Brandmeister - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the same username and password as in the previous. Video. Then click on the slider to enableMoreWith the same username and password as in the previous. Video. Then click on the slider to enable DMR mode make sure the other modes are left off for now click to apply the changes.
What is DMR hotspot?
A DMR hotspot is a gateway that allows your radio to connect to a digital network like Brandmeister or DMR-MARC. You can also use your hotspot to connect to other digital network's like Yaesu System Fusion and D-Star. Most hotspots operate as a simplex gateway.Aug 23, 2020
What does a ZUMspot do?
2c) ZUM Radio ZUMspot It's a Multi-Mode Digital Voice Modem that works with DMR, D-STAR, YSF, P25, NXDN, various cross modes, and POCSAG. The ZUMspot-RPi Board 3 v0. 6 includes a pre-installed Nextion display header connection, as well as these updates: EMI (ElectroMagnetic Interference) improvements.
How do I update ZUMspot firmware?
Firmware release notes on GitHub: ZUMspot/MMDVM_HS .Log into Pi-Star via SSH.Run a Pi-Star Update: ... A prompt will tell you to press any key to begin.When the update is finished, another prompt will tell you to press any key to reboot Pi-Star.More items...
How do I setup a Mmdvm hotspot?
1:495:44Pi-Star Hotspot setup full tutorial for beginners! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you'll need to type in PI star for the username. And raspberry again for the password. And hereMoreAnd you'll need to type in PI star for the username. And raspberry again for the password. And here it is the first thing to do is set up your Wi-Fi. So scroll down and click on configure Wi-Fi.
Why is DMR net yellow?
Additional note: If you have updated to dashboard version 20210312 or later and this update changes your DMR Master, on the Admin page in the Network Status module, DMR Net might be highlighted yellow, which means one of your DMR services is failing to log in.
How do I add a hotspot to BrandMeister?
How to proceed ?Login to your BrandMeister Selfcare.On the top right, click on your Callsign.Click on the “SelfCare” option.At the bottom of the page, check the box “Hotspot Security”A password box will appear. Enter your personalized hotspot password and click “Save”.
Cant log in to dashboard after initial set up
What to do when you cant find Pi-Star Admin, Configuration, Dashboard in any web browser after Pi-Star set up???
Re: Cant log in to dashboard after initial set up
192.168.50.1 is the IP address for Auto AP, which connects your computer directly to your Pi-Star hotspot on a private network (not connected to your actual WiFi network). Auto AP is used for the initial configuration of Pi-Star, including adding the name and password for your actual WiFi network.
How to open command prompt?
Open Command Prompt by right-clicking the Start button and selecting Command Prompt. Note: For Windows, you’ll need to install Putty and follow these instructions before proceeding. For other versions of windows, simply search your computer for the Command Prompt application. 2.
What is the best way to keep files synced across devices?
If you're trying to keep your important files and folders synced across all of your devices, one of the best methods is to use a cloud storage provider like Dropbox.
Do I need to enable SSH on Raspberry Pi?
If you're using an up-to-date version of Raspberry Pi OS (as you should!), you'll need to enable SSH on your Raspberry Pi before proceeding.
What is Pi Star?
Pi-Star is digital voice software for personal, low-power hotspots, as well as repeaters. It can handle DMR, D‑STAR, and YSF, as well as P25, NXDN, POCSAG, and multiple cross modes when used with a multi-mode digital voice modem that supports those modes.
What is RPT1 callsign?
RPT1 Callsign – Autofilled with the callsign from General Configuration.#N# ☆ RPT1 Module – The hotspot module you want radios to connect to, by default, set to the B module, which is typically used for UHF hotspots.
What mode do you use for a simplex hotspot?
For most simplex hotspots, you must use D-STAR Repeater (DR) or Duplex mode: set up RPT1, RPT2, and a zero offset (either +/−0.000). See: Use DR mode and D-STAR Radio Primer for using Pi-Star video by Craig, W1MSG.
Does Raspberry Pi 3 have an AP?
The Auto AP feature, which works with the Raspberry Pi 3 and Zero W, was added in version 3.4.11. If the feature is enabled (which is the default), after Pi-Star boots up (takes about a minute), it will attempt to connect to a known WiFi network. If it can't connect within another two minutes after boot up, Auto AP automatically activates its own network access point, which you can use to connect to Pi-Star in order to configure WiFi settings.
Can I open Pi Star on my computer?
Optionally, you can open the Pi-Star dashboard on any Windows, Mac, or Linux computer (not the hotspot) connected to the same network as the hotspot by browsing to (use trailing slash) http://pi-star/ for Windows, or http://pi-star.local/. Enabled modes are highlighted green, and you can monitor activity.
Can you use auto AP on a microSD card?
If you can't use Auto AP or you just like to do things manually, after you finish flashing the image to a microSD card, you can manually add your initial WiFi settings to the boot partition so they'll auto-install on first boot up:
What is a POCSAG?
POCSAG is an asynchronous protocol developed by the Post Office Code Standardisation Advisory Group that is used to transmit data to pagers. The DAPNET (Decentralized Amateur Paging Network) network, which is operated by amateur radio enthusiasts, is based on POCSAG.
Pi-star color hex code for the dashboard
Looking to re-color the dashboard. I know how to do it, but would like, if anyone has, a schedule of colors for the dashboard? I tried using Color Hex ( https://www.color-hex.com/color-palettes/popular.php ), but the color didn't come out right. Therefore i believe, i am not doing it right (big shocker there).
When was my Pi-Star last booted
Here is an alias for the SSH client to display when the Pi-Star was last booted:
Pi-star Dark Mode Dashboard
Just wanted to share my settings for my version of dark mode for the dashboard. I used the css tool in the expert settings. I just found this easier on my eyes.
Pi-star Cron jobs in V4.1.2
Cron jobs in V4.1.2 are working well now that Andy has added all the scripts necessary to connect in all the modes.
Pi-star Port Forward
If anyone needs to access the Pi-Star Dashboard outside their network (not in the same location) you can forward the ports in the router to help with this. This way it does not change anything in the Pi-Star files.First thing is to have your router set the static IP.
Pi-star Changing default Auto AP SSID and password
Changing default Auto AP SSID and password#N#I had searched high and low to find out how to change the default Auto AP SSID and password. I finally figured it out. To make life easier I wanted to share it here.#N#1. Go to the SSH login page on your Pi-Star
JumboSpot or Hotspot Pi-Star How do you lower the RF TX power
How do you lower the RF TX power#N#I have a Raspberry Pi 3 ( think it is the B version) I purchased a MMDVM hotspot that I need to configure. I can attach it to the system board. I found this document but I am wondering if the code in the steps is valid. I want to run DMR and YSF for now.
DMR Master Server 3101 is being retired
Important! Per Corey, N3FE: "Due to issues that have been happening recently, we are going to need to start requiring users to set a hotspot security password to gain access to the US Masters. If you already have a hotspot security password set on the bm portal, you can ignore this post.
Mar 12, 2021: DMR Host Files - Changes
Pi-Star User Forum message from Andy Taylor: The DMR Host file content is changing, in-line with a coming change in MMDVMHost, the Pi-Star DMR host file will include more DNS names (rather than being mostly full of IP addresses). What this means for you:
Some possible troubleshooting steps
Toggle – If a feature isn't working correctly, turn it off, then back on.
