how do you make a 3d butterfly

How to Make DIY 3D Butterfly

More items

Full Answer

How do you make a paper butterfly?

I got a picture and drew the butterflies free handed; if you are not good at drawing you can always use a template. Take long stripe of black craft paper and draw one butterfly in one end, then start folding the paper in to zigzags and cut out the butterfly, this way you can cut many butterflies at once.

How do I make a 3D butterfly with Cricut?

The first step is to download the free 3D butterfly SVG File and upload it to Design Space. If you need extra help with the downloading please see this post Once you have the SVG into Design Space you can re-size it to whatever size you’d like up to the maximum width Cricut will cut which is 11.5 inches.

How to assemble a butterfly for a project?

After all of your layers are cut it’s time to assemble your butterfly. Start with the largest piece and add glue down the center. Be sure to add glue to the head and antennas as well. Line up the next size butterfly layer from the bottom center of the body and press all down the center. Line up the antennas and press them together also.

Step 2: Square Shape of Paper

Take a colorful paper and fold it such that its top edge meets it with the line of paper . Afterwards , cut the rest of the paper piece and we will have a square paper.

Step 3: Folding

Now meet the other edge of paper to another end and we will have lines in a cross.

Step 4: Folding

Then fold the paper in half from both sides and we will get some lines on the paper (as shown in the picture).

Step 5: Giving the Shape

Fold the paper from the center such that we get a triangle of that paper (shown in picture).

Step 6: Cutting

Now cut the open end of the triangle to give a circle shape to the wings of the butterfly.

Step 7: Making the Butterfly

Now fold the butterfly's wing from both sides and take its pointing side to the back of it.

Step 10: Pasting Circles

Take a punch machine and cut the glitter sheet into small circles and paste them on butterfly.

Step 2: Step One

Download a butterfly template or download a butterfly picture. I got a picture and drew the butterflies free handed; if you are not good at drawing you can always use a template. Take long stripe of black craft paper and draw one butterfly in one end, then start folding the paper in to zigzags and cut out the butterfly, this way you can cut many butterflies at once..

Step 3: Step Two

Fold the wings in upward direction leaving the body part; paste a small piece of double sided tape under the body. Peel off the paper and paste the butterflies on the wall.

What are Butterfly STEM Activities?

Butterfly STEM activities are a fun way to bring the concepts of butterfly science to life. There are a lot of reasons to do hands-on science experiments with kids, but you don’t ever have to do seasonal science experiments.

Why Make a Butterfly Model?

By the time spring rolls around, kids are ready for a break. They want to get outdoors and explore and are ready for summer break already.

Monarch Butterfly Facts for Kids

During our butterfly life cycle science project, we learned all about why Monarch butterflies have the parts they do and what each part does.

How to Make a 3D Butterfly Out of Paper

After completing our butterfly science study, we decided to make a 3D model of a Monarch butterfly. We only used craft supplies that we had on hand, so our colors aren’t quite accurate, but Monkey completed the design on her own with little help from me.

Monarch Butterfly Model Directions

We created our butterfly science model by using the diagram as a guide. We wanted our Monarch butterfly to have all of the necessary parts and be somewhat realistic in scale.