how do you make a backyard pipe ball game

Steps for Making a DIY Pipe Ball Lawn Game

Full Answer

How do you make a pipe ball jig?

Download rules and a scorecard for the game of pipe ball. First, cut the jig walls and base to length according to the cut list. With your circular saw set to 30 degrees and guided by a straightedge, bevel one end of each jig wall. Lay the base flat, and sandwich it between the walls, set on edge with their bevels parallel.

What kind of games can I play in my backyard?

You need games of skill and strategy, games once played by warriors and kings—games like bocce, horseshoes, and croquet. To learn how you can create your own outdoor sport courts, see A Backyard Built for Games.

How to make your backyard the season’s hottest destination?

Give kids and guests a buffet of playtime options and your backyard could be the season’s hottest destination. All it takes is games suited to all ages and abilities, a place where family and friends can gather to face off-whether it be for an innocent competition or a heated grudge match. In other words: If you build it, they will come.

How do you attach pipes to a concrete slab?

While all the pipes are positioned upside down on their angled ends, loop a plastic tie from the deeper 4-inch hole through the shallow ½-inch hole, secure it, and cut off the excess. Repeat until all the pipes are attached.

How to make a pipe rack?

How to make a triangular rack?

How to cut pipe with a pull saw?

How to cut a jig wall?

Can you play Nerf basketball at a garden party?

See 2 more

About this website

PIPE BALL : 17 Steps - Instructables

PIPE BALL: Pipe Ball is a ball toss game. This is a very easy game to make. This game has 16 pipes in 7 rows, with all pipes in the same row having the same point ...

Pipeball : 6 Steps - Instructables

Pipeball: Pipeball is a fun toy made of PVC pipe. Children can have fun only using a tennis ball. Aim and hit the hole!

How to make a rocket above trees?

If you put air under pressure, like in a tire, you can use it to propel an object upwards. Add water to the mix, and your rocket will go far above the trees. This rocket is made from simple PVC plumbing pipe and some plastic soda bottles.

Can you shoot a foam basketball at a door mounted hoop?

All those hours of playing Nerf hoops might finally add up to a useful skill when you bust out the pipe-ball game at your next garden party. Instead of shooting a foam basketball at a door-mounted hoop , though, you're arcing a tennis ball at a grouping of pipes—and the rebound is nasty. The angled ends and the varying heights of the pipes make it a game of skill that demands nothing less than the equivalent of a swish.

Step 1: Paint Tire

Make sure that your tire is clean and dry. Paint it with an even coat of spray paint. You might also want to paint the metal cap that will go at the top of the pole.

Step 2: Drill Pipe for Rebar

Using a 1/2-inch cobalt drill bit, drill one set of holes through the pipe 3 inches from the bottom of the pipe. Rotate the pipe 90 degrees and drill another set of holes 2-1/2 inches up from the first set.

Step 3: Prep for Concrete

Place the tire on top of a sheet of heavy plastic on a level surface. Thread the rebar through the drilled holes and place it in the center of the tire.

Step 4: Add Concrete and Level Pole

Mix the concrete in batches according to the instructions on the bag and pour it into the tire.

Step 5: Add Decorative Stones

To the slightly-set full pour or the final two-inch pour, add your decorative stones in any design you fancy. Gently press them into the surface of the concrete (if they sink too deeply, wait 10-15 minutes and try again). Use a spray bottle full of water to keep the concrete moist as you work.

Step 6: Install Eye Bolt Into Cap Piece

When the concrete is fully set you are ready to install the eye bolt. Drill a 3/8-inch hole in the top of the galvanized cap. Insert the eye bolt into the hole and tighten with the locking washer and nut.

Step 7: Hang the Ball

Screw the cap onto the top of the pole and hook the ball to the eye bolt. Tie the rope so that the ball hangs about two feet off the ground, you can hang the ball lower for younger players.

How to make a pipe rack?

Rack the pipes into a triangular shape on their angled ends, with the tallest row of four in back and the shortest one in front so that all the angles line up. On the bottom (straight—cut) edge of each pipe, mark where each pipe touches the adjoining pipes. One by one, remove a pipe from the grouping and transfer vertical lines onto the side of the pipe from the bottom marks. On each line, drill a ¼—inch hole at ½ inch and 4 inches from the bottom; you'll run plastic ties through these holes to connect the pipes.

How to make a triangular rack?

To create a triangular rack of pipes whose openings angle toward the players , you'll cut different lengths at a 30-degree angle and arrange them with the shortest one at the front. Because the width of the drainpipe is larger than many miter saws, you may need to fabricate a jig to guide your pull saw at the appropriate angle. And since the pipes aren't made of PVC—and can't be glued—you'll need to drill holes where they meet and attach them to one other with plastic ties. Once you're finished, you can create a second rack and set up a playing field, or have everyone trade off aiming at the same rack. Either way, it's easy to spot the true pros. They're the ones who score while holding a drink in one hand.

How to cut pipe with a pull saw?

Set the blade of the pull saw on the pipe, using the jig bevels as a guide. Cut through the pipe keeping the blade against the bevels through the entire cut.

How to cut a jig wall?

First, cut the jig walls and base to length according to the cut list. With your circular saw set to 30 degrees and guided by a straightedge, bevel one end of each jig wall.

Can you play Nerf basketball at a garden party?

All those hours of playing Nerf hoops might finally add up to a useful skill when you bust out the pipe-ball game at your next garden party. Instead of shooting a foam basketball at a door-mounted hoop, though, you're arcing a tennis ball at a grouping of pipes—and the rebound is nasty.