- Put the water bottle where it will stand upright securely, or have a partner hold it. Fill it halfway with vinegar.
- Give the balloon a good stretching, like you would if you were about to blow it up.
- Use the funnel to put the baking soda inside the balloon. Gently shake the balloon until all the baking soda goes to the bottom.
- Making sure none of the baking soda gets into the water bottle, carefully stretch the opening of the balloon until it’s completely over the opening of the water bottle. ...
- Once the balloon is attached to the water bottle, lift the rest of the balloon so that the baking soda falls into the vinegar. ...
- Watch the balloon inflate! What’s happening here is the vinegar, an acid, is creating a chemical reaction with the baking soda, a base. ...
How do you manually blow up a balloon?
Blowing Balloons up Manually Locate the filling tab on the outside of your balloon. Insert a drinking straw into the tab to help you blow it up. Pinch the straw and filling tab so air doesn't come out as you inflate it. Blow into the end of the straw to fill the balloon with air. Remove the straw and pinch the seal to close it up.
How do you make a balloon out of vinegar?
Here are some printable instructions: Using a funnel, pour about a third of a cup of vinegar into the bottle. Tip: I used Apple Cider Vinegar, but any kind of vinegar will work. Then insert another funnel into the mouth of the balloon.
How do you inflate a balloon with baking soda?
If it’s not a tight fit, your balloon is probably too big and you should use a smaller one instead. Once the balloon is attached to the water bottle, lift the rest of the balloon so that the baking soda falls into the vinegar. You might have to give it a gentle shake to make sure it all goes in. Watch the balloon inflate!
How do you fill up a balloon with foil?
Method 1. 1. Locate the filling tab on the outside of your balloon. All foil balloons have a small, 1–2 in (2.5–5.1 cm) filling tab designed to easily blow up ... 2. Insert a drinking straw into the tab to help you blow it up. You can use any standard drinking straw to help you fill up the balloon. ...
How do you make a balloon inflate itself?
Fill it halfway with vinegar. Give the balloon a good stretching, like you would if you were about to blow it up. Use the funnel to put the baking soda inside the balloon. Gently shake the balloon until all the baking soda goes to the bottom.
Can balloons inflate by themselves?
When the vinegar and baking soda combine there is a reaction between an acid and a base. Vinegar is the acid and baking soda is the base. This reaction between the two causes a gas called carbon dioxide to bubble and foam. This gas having nowhere else to go, expands the balloon making the self-inflating balloon happen.
How do you inflate a balloon without touching it?
Step-by-step instructions Pour some boiling water into a glass bottle and wait until the glass warms up. Pour out the water and put the balloon on the neck of the bottle. After a while, the balloon will be drawn into the bottle, and then it will inflate!
How do you make a balloon blow up with a water bottle?
1:472:50Blow Up a Balloon with No Hands Experiment - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce it is you're gonna slowly lift the balloon pouring the baking soda into the bottom of theMoreOnce it is you're gonna slowly lift the balloon pouring the baking soda into the bottom of the bottle. And you'll see that the balloon blows. Up.
What chemicals are in self inflating balloons?
This self-inflating balloon has three components to make it inflate– citric acid, distilled water, and sodium bicarbonate (baking soda). The citric acid and distilled water are stored together in a small pouch inside of the balloon and the baking soda is stored outside of the bag.
How do you inflate a balloon with baking soda?
Stretch the opening of the balloon over the end of the funnel. Pour about 1/3 cup of baking soda into the funnel and shake it around a bit until it all falls through the funnel and into the balloon. Just make sure you hang onto the balloon opening so it doesn't fall off the funnel.
How do you pop a balloon without hands?
0:000:56Make a Balloon Explode without touching it! - Easy balloon experimentYouTubeStart of suggested clipEnd of suggested clipWe'll have to press the orange peel like this you won't see it in the image but the particles thatMoreWe'll have to press the orange peel like this you won't see it in the image but the particles that come out when you press will help us explode to the balloon without touching it.
How do you pop a balloon with your hands?
To pop a balloon with your body, hold the balloon securely in your hand, then apply pressure to the sides of the balloon with your hands, feet, or any other part of your body. You can jump or stomp on the balloon if you like, but be careful not to trip or fall. You can also sit on the balloon if you like.
What liquids can pop a balloon?
Water balloons are not made of vulcanized rubber1, because people generally want these balloons to be somewhat breakable. Because of this difference in its chemistry, a water balloon pops when squirted with limonene or orange peel juice!
How do you teach a kid to blow up a balloon?
0:091:59How to Blow Up a Balloon, for the One Commenter Who Asked - YouTubeYouTubeStart of suggested clipEnd of suggested clipNot past your teeth just past your lips and keep your tongue out of the way at first the balloonMoreNot past your teeth just past your lips and keep your tongue out of the way at first the balloon will only inflate a little bit so you need a big burst of air to start expanding the rubber.
How do you blow up a balloon without helium?
First, fill the water bottle about 1/3 of the way full with white vinegar. Next, put baking soda into the un-inflated balloon, filling it about halfway. Ideally, you'd have a funnel handy for this process but, because I didn't have one, I made one out of rolled-up construction paper and tape. It did the trick!
How long do balloons stay blown up by mouth?
Standard size latex balloons stay afloat for approx 8 - 12 hours when filled with helium, whereas helium filled foil balloons float for 2-5 days.
How long will balloons stay inflated with air?
Air-Filled Latex and foil balloons can be inflated with air; however, they will not float. If you're inflating balloons yourself, good news is you can save your lungpower by using a handheld balloon pump or an electric balloon bump. In general, most air-filled balloons will last for 6-8 weeks.
How long do balloons stay inflated without helium?
5-7 days. Air-filled balloons generally last for a couple of weeks, but will not float. What is Hi-Float?
Will balloons deflate overnight?
Air-filled latex or foil balloons will not deflate overnight, especially when the arch, column or garland is indoors. Even an outdoor arch or column will last overnight. However, dew and condensation during the night can make the balloon surface wet and slightly sticky.
How to test a balloon?
Experimental Procedure: Put the test tube where it will stand upright securely, or have a partner hold it. Fill it halfway with vinegar. Give the balloon a good stretching, like you would if you were about to blow it up. Use the funnel to put the baking soda inside the balloon.
What happens when vinegar and baking soda mix?
When the two substances mix, you get carbonic acid, which is unstable and decomposes (falls apart) to become carbon dioxide (the gas that’s filling the balloon!) and water.
How to clean a balloon with baking soda?
If you only have one funnel, it is important that you completely wash and dry the funnel after you add the vinegar and before you put it into the balloon. Place two teaspoons of baking soda into the funnel so it falls into the balloon. Then remove the balloon from the funnel.
What happens when you add baking soda to a balloon?
The more gas that is created, the larger the balloon will inflate. The baking soda and vinegar chemical reaction will continue to inflate the balloon as long as there is still baking soda and vinegar to react. Once the reaction between baking soda and vinegar has stopped, the balloon will slowly begin to deflate.
Why do gases expand?
Gases expand rapidly because their particles move at high speeds in all directions. As the carbon dioxide gas fills the bottle, it has nowhere else to go so it begins to fill the balloon. As the carbon dioxide gas fills the balloon, the balloon inflates. The more gas that is created, the larger the balloon will inflate.
How to make a balloon full of air?
Blow into the end of the straw to fill the balloon with air. Take a deep breath in, and blow steadily and gradually into the straw. Then, take another deep breath, and repeat the process until the balloon is full of air. The number of breaths will depend on the size and shape of the balloon.
How to fill up a balloon with straw?
When you locate the filling tab, separate the 2 layers of plastic, and slip the straw in between. Then, insert your straw until you break the inner seal, which is about 1–2 in (2.5–5.1 cm) in. You’ll feel the seal snap as you insert the straw.
How to fill a balloon with helium?
1. Insert the nozzle of the helium tank into the filling tab of the balloon. Place the opening of the balloon around the nozzle of the helium tank so the nozzle is about 1–2 in (2.5–5.1 cm) in. This is known as the filling tab. As you fill the balloon, hold onto the filling tab securely. ...
How to overfill a balloon with a hand pump?
5. Remove the tip of the pump and pinch the balloon closed. After the balloon is mostly full, secure the filling tab with your hand, and gently pull the tip of the pump out of the balloon.
What is foil balloon made of?
In particular, foil balloons are made from several thin sheets of metal over nylon material. As a result, these balloons are much less porous and can stay inflated for much longer than regular latex balloons. You can easily fill the balloons either with a straw and some lung power or a hand air pump.
How long can you keep a balloon in the air?
4. Enjoy your balloon for 3-7 days. Helium is an easy way to fill foil balloons, but they don't last quite as long as using regular air. You can tie a ribbon to your balloon to display it for a birthday party, retirement celebration, or wedding, for example.
How many layers of plastic are in a balloon?
The filling tab is a small section of the balloon that allows you to fill it with air. There are typically 2 layers of plastic inside the filling tab. Slip the tip of the pump in between the plastic layers so you can fill up the balloon. 3. Hold the plastic seal tightly so the air doesn’t come out.
Supplies Needed
- Small Soda Bottle
- Balloon
- Baking Soda
- Vinegar
Balloon Blow Up Science Experiment Instructions
- Step 1 –Start with some questions: How do you blow up a balloon? What if I told you that you couldn’t blow air into it, do you think you could still inflate (blow-up) the balloon? Then observe the supplies for the experiments. Do you think they can be use to blow up the balloon? If so how? Write down your hypothesis (prediction). Step 2 – Using a funnel, pour about a third of a cup of v…
How Does The Science Experiment Work?
- When baking soda (a base) and vinegar (an acid) are mixed together they create a chemical reaction that results in the formation of carbon dioxide gas. Gases do not have a specific shape or volume, rather they expand rapidly filling their container. Gases expand rapidly because their particles move at high speeds in all directions. As the carbon di...
Other Ideas to Try
- Does changing the amount of baking soda and vinegar change the size of the balloon when it inflates? What would happen if you used another acid like lemon juice instead of the vinegar? Would it react the same with the baking soda? I hope you enjoyed the experiment. Here are some printable instructions: