Steps For Making Bead Bracelets
- 1) Add a bead stopper to one end of your elastic, so the beads will stay on the cord.
- 2) String your first bead or bail where you will hide the knot when finished. ...
- 3) Check the length and the pattern. ...
- 4) Tie a knot and pull it pretty tight. ...
- 5) Cut the ends, and hide the knot under the bead (or bail).
- Prepare your materials.
- Cut the elastic to length.
- Prestretch the elastic cord.
- Secure the end of the cord.
- Lay out your beads.
- String the beads onto the cord.
- Tie a knot to secure the beading cord.
- Secure the knot with glue.
How to make handmade beaded bracelets?
step 1: Using a double strand of waxed thread about 3 yards long, string a tension bead (see “Stitches,” page 84) leaving a 6" tail. Row 1:String seed beads in sets of four for the desired width of the brace- let, about 2". Row 2:Pass back through the eighth bead, counting from the needle end. String 3 beads.
How to make bracelets with beads and string?
To make a long-lasting elastic bracelet, follow these other tips:
- Stretch your cord before stringing any beads. Your bracelet will stay the right size and won't stretch out leaving gaps between the beads.
- Make your bracelet the correct size. ...
- Tie your knot with some tension in the bracelet. ...
- Tighten your knot from all sides. ...
- After cutting the elastic cord, add a dab of glue to the knot. ...
- If possible, cover your knot. ...
How to make homemade bracelet?
Part 3 Part 3 of 4: Making a Bracelet Download Article
- Try making a beaded bracelet. A simple beaded bracelet is a great way to begin making handmade bracelets.
- Add beads to your bracelet wire. Begin by stringing your beads onto the wire still attached to the spool.
- Determine your bracelet length. ...
- Add a jump ring to an end of your bracelet. ...
- Secure an end to your bracelet. ...
How to make beaded stretch bracelets?
GET THE PASSWORD HERE!
- STRING LETTER BEADS. Thread your letter beads on your cord first. ...
- SIZE THE STRETCH BRACELET. Have someone else wrap the bracelet carefully around the wearer's wrist. ...
- TIE BRACELET KNOT. Time to tie your elastic cord into a knot. ...
- TRIM AND GLUE KNOT. ...
- PUT KNOT INSIDE CRIMP COVER. ...
- CLOSE CRIMP COVER WITH PLIERS. ...
What you need to make a beaded bracelet?
Here is a list of what you will need:Beading wire.Clasp and hook.2 crimp beads.2 seed beads.Beads.Wire cutters.Needle nose pliers.Tape or binder clip.
What is the best material to make a beaded bracelets?
Today, jewelry wire is the go-to material for most stringing projects. It is designed for stringing beads of all shapes and sizes. It is much stronger than typical stringing threads and cords. It is also fray-resistant, so designs with beads that have sharp edges, such as crystals and metal beads, will be more durable.
How do you string a bead bracelet?
1:089:37How to Secure a Stretch Cord Bracelet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you have your little supplies here let's go ahead and get started so we're gonna begin byMoreSo if you have your little supplies here let's go ahead and get started so we're gonna begin by taking some of our opal on here. And we're just gonna get a good long length.
How do you make a bracelet step by step?
Steps For Making Bead Bracelets Add a bead stopper to one end of your elastic, so the beads will stay on the cord. String your first bead or bail where you will hide the knot when finished. ... Check the length and the pattern. ... Tie a knot and pull it pretty tight.More items...•
What is the best cord for making beaded bracelets?
Create Homemade Accessories with the Best Elastic String for Jewelry MakingStretch Magic Beading Cord. This super-sturdy, 1-millimeter spandex cord comes on a 16-foot roll. ... Beadaholique Beadsmith Opelon Elastic White Beading Cord. ... Darice Elastic Cord. ... Mandala Crafts Elastic Cord. ... Beadnova Crystal String Cord.
What kind of thread is used for bracelets?
Embroidery floss (or thread) is yarn that is manufactured or hand-spun specifically for embroidery and other forms of needlework. It is also very good for making bracelets! It is made out of cotton and is six stranded.
How do you make a bracelet with string and beads easy?
How to Make Stretch Bead BraceletsCut the elastic to length. I like to use a double strand of elastic to make stretch bracelets. ... Prestretch the elastic cord. ... Secure the end of the cord. ... Lay out your beads. ... String the beads onto the cord. ... Tie a knot to secure the beading cord.
What is the best material for stringing beads?
Silk is often preferred, because it also matches the pearl beads in quality and is easy to knot in between beads. On the other hand, certain beads have sharp edges. Hematite, for example, can fray or cut through certain types of beading string over time.
How do you make bracelets with wire and beads?
3:5613:49DIY Beaded Charm Bracelet with wire, crimp beads, & claspsYouTubeStart of suggested clipEnd of suggested clipAnd if you already have a bracelet made like I do then you can kind of lay it next to the beads thatMoreAnd if you already have a bracelet made like I do then you can kind of lay it next to the beads that you're stringing on to see that it's the same length. And then you'll know when to stop beating.
How do you make a simple bracelet?
1:2214:32DIY Friendship Bracelets. 5 Easy DIY Bracelet Projects! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe loom one two three take the third string. And move it into the free cut. This is all you need toMoreThe loom one two three take the third string. And move it into the free cut. This is all you need to do rotate the loom and move the third string into the empty. Cut.
How do you make a sliding knot bracelet with beads?
9:5122:55Simple Beaded Slip Knot Bracelet- DIY Jewelry Making Tutorial by ...YouTubeStart of suggested clipEnd of suggested clipThere. So on my design just for your reference. I did one of each color then 5 10 5. And then one ofMoreThere. So on my design just for your reference. I did one of each color then 5 10 5. And then one of each color again separating out those sections with one or two of my spacer beads.
How do you tie a bracelet knot so it doesn't come undone?
0:071:59How to Knot Elastic Bracelets and Make the Knot that doesn't brakeYouTubeStart of suggested clipEnd of suggested clipAnd begin the first section of your knot. So that's just like a basic overhand knot. But this timeMoreAnd begin the first section of your knot. So that's just like a basic overhand knot. But this time we're now going to take the right strand. And place it over the left so I've reversed.
What material is used to make bracelets?
Bracelets can be manufactured from metal, leather, cloth, plastic, bead or other materials, and jewelry bracelets sometimes contain jewels, rocks, wood, shells, crystals, metal, or plastic hoops, pearls and many more materials.
What materials do you need for a bracelet?
To make a flexible bracelet, you'll need beads, beading wire, crimp beads and a clasp. However, if you'd like to start with a simpler project, there are also special types of bracelet findings that are thick wire cuffs with threaded balls on the ends.
How do you make a stretchy bead bracelet?
How to Make Stretch Bead BraceletsCut the elastic to length. I like to use a double strand of elastic to make stretch bracelets. ... Prestretch the elastic cord. ... Secure the end of the cord. ... Lay out your beads. ... String the beads onto the cord. ... Tie a knot to secure the beading cord.
What is used to make friendship bracelets?
Friendship bracelets are traditionally made out of embroidery floss, but you'll find all sorts of variations in these tutorials, including bracelets made out of yarn, leather cord, fabric scraps, and other interesting materials.
How to make a bracelet with beads?from thesprucecrafts.com
The basic supplies you will need are: 1 Alphabet Beads: THESE are the ones that I love most but you can also use this multi-pack or these colorful alphabet beads 2 You’ll want a great selection of colorful pony beads to make your bracelet. THIS rainbow pack is by far my favorite. We’ve had our box of beads for months and still have plenty to use for more bracelets. 3 Crimp Cover Pliers: This tool is a must have if you want to create a neat, finished end on your bracelet. 4 Elastic: I recommend using 1mm elastic for making beaded bracelets. 5 Jewelry Glue: You’ll want to use a dab of glue on your bracelet knots to make sure they are secure. This glue has a thin, fine applicator so you don’t end up with glue everywhere. It’s easy to apply only to the small knot. 6 Scissors: any pair of scissors will do, but I really like these for small detail work. 7 Crimp Covers: you’ll want to get the 3mm crimp covers. They are a must have for this project if you want to create finished ends on your bracelet that won’t unravel.
How to tie a bracelet with a square knot?from thesprucecrafts.com
Carefully make the first half of a square knot, gently pulling the cord ends to remove slack in the bracelet. While holding the first half of the knot in place, tie the second part of the knot and pull firmly to secure.
What kind of clasp do you use for a bracelet?from wikihow.com
It does not matter which part of the clasp you put on first. You can use any type of clasp. A spring or lobster-claw clasp is the most traditional, but a magnetic one may make the bracelet easier to take on and off.
How to crimp a bead?from instructables.com
To crimp the bead, get your plyers and squeeze the bead. It should become slightly smaller and flat instead of round. This will hold the clasp in place.
How to avoid crimping bracelets?from damasklove.com
There’s an easy way to avoid this by using crimp covers and a crimp cover plier tool. Create a knot on each of the tails on your bracelet. Supplies for using the crimp covers. Once you have created a knot on both tails, grab the crimp cover pliers and the crimp covers.
What knot to use for seed beads?from thesprucecrafts.com
For stacking seed bead bracelets, the square knot is best because it hides inside the beads better. With gemstone bracelets, use a surgeon's knot, as it is a little bulkier but more secure. Remove the bead stopper and the needle from the elastic cord, and then bring both ends together.
How to determine how many beads to use for a design?from wikihow.com
Consider laying out your design on a beading tray. If you do not have a beading tray, lay your pattern down on a table, right next to the measuring tape. This will allow you to determine how many beads you will need for your design. If you are doing a simple design (such as two altering colors) or a random design, you do not need to do this.
How to make a bracelet with beads?
String all of the beads for your bracelet. Check the length occasionally by wrapping the strung beads around your wrist. Be sure to leave a little space between your skin and the bracelet, so that you can roll it over your wrist without breaking the stretch cord. This also helps to ensure that no empty areas show through. Make sure that the last bead you string has a hole large enough to hide a knot in your beading cord.
How to pull a knot from a bead?
With the glue still tacky, hold the cord between two beads about an inch away from the knot, and tug gently to pull the knot inside of the adjacent bead.
How to tie a bead stopper?
Remove the bead stopper and the needle from the elastic cord, and then bring both ends together. Carefully make the first half of a square knot, gently pulling the cord ends to remove slack in the bracelet. While holding the first half of the knot in place, tie the second part of the knot and pull firmly to secure.
How to knot a bracelet without losing tension?
If you do lose tension, try pulling both ends of the cord away from each other to take up some slack. After completing a few bracelets, this should become much easier.
How to string beads without a needle?
Unless your beads are large enough to string without a needle, thread a collapsible eye or big-eye needle onto the other end of the stretch cord and fold over a two-inch tail. This step is optional if you're using beads with very large holes; in that case, you can often string them directly onto the cord.
What is the fastest drying glue for bracelets?
You may prefer to use something more slow-drying like E6000 and then simply allow them to dry before wearing your bracelet.
What to look for when selecting beads?
Choosing Beads. When selecting beads, look for ones that are lightweight and don't have sharp edges around the holes to avoid cutting or wearing away the elastic cord. Seed beads work well because their small size makes them lightweight and most have smooth holes. You can also use plastic beads, including vintage Lucite beads, pony (kanji) beads, ...
How to make a bracelet with two threads?from wikihow.com
Hold the two threads together, fold them in half, and tie a large knot near the top of the loop. You will want about two to four knots. Don't worry if they look messy; you will be hiding them. You should end up with a large knot and four strands of thread coming out of it. This will make the bracelet more durable.
How to make a beaded strand?from wikihow.com
Cut two pieces of thread that are twice the length of your measurement. You will be folding them in half in a later step. This will make one beaded strand.
What kind of clasp do you use for a bracelet?from wikihow.com
It does not matter which part of the clasp you put on first. You can use any type of clasp. A spring or lobster-claw clasp is the most traditional, but a magnetic one may make the bracelet easier to take on and off.
What is a memory wire bracelet?from momsandcrafters.com
Memory wire bracelets are some of the easiest DIY wire bracelets you’ll ever make. Check out the amazing variety of style you can make with such a simple base! The spiral of the wire gives a statement cuff look, but the actual process is one you learned to do when you were in preschool.
How to tie a bead stopper?from thesprucecrafts.com
Remove the bead stopper and the needle from the elastic cord, and then bring both ends together. Carefully make the first half of a square knot, gently pulling the cord ends to remove slack in the bracelet. While holding the first half of the knot in place, tie the second part of the knot and pull firmly to secure.
What is wire bangle bracelet?from momsandcrafters.com
Wire bangle bracelets are the perfect touch of flair for any outfit. These wire bracelets are a bit smaller, making them a more subtle accessory if needed. How to make Beaded Bangles by Moms and Crafters: Sometimes the simplest things are the prettiest.
How to string beads without a needle?from thesprucecrafts.com
Unless your beads are large enough to string without a needle, thread a collapsible eye or big-eye needle onto the other end of the stretch cord and fold over a two-inch tail. This step is optional if you're using beads with very large holes; in that case, you can often string them directly onto the cord.
Who has a beaded bracelet?from byboe.com
These beaded bracelets have been quite popular over the last couple of decades. Johnny Galecki, Johnny Depp, and Justin Bieber have sported those bracelets which are simple to create and wear.
How to choose gemstone beads?from byboe.com
2. Laying Out the Cording. After stringing your beads, tie an overhand knot on all sides of the beads. It needs to be tight but not bunchy.
How to make an adjustable knot?from byboe.com
Making the First Adjustable Knot. To create the elastic knot , cut on a bit of the stringing material (my blue dye ) approximately 12 inches. Today you will form the loops. As you can see, one end of the blue yarn is pointing upward and to the right, and you are pointing down and to the left.
What is an adjustable necklace?from byboe.com
An adjustable necklace is an excellent handmade gift for a guy because of his birthday, Father’s Day, or other events. The basic principles for your adjustable sliding knot could be modified to get a necklace or bracelet. Changing the raw materials up marginally will make these layouts acceptable for a lady.
How to make a sliding knot?from byboe.com
Sliding Knot Instructions Cross both ends of the cord so the left cord is in front of the right cord. Wrap the left cord around the right cord. Wrap around the right cord again, making one complete loop. Be sure to keep these loops loose while wrapping. Continue wrapping around the right cord.
How to make a sock out of yarn?from instructables.com
1. Wrap the yarn twice around your wrist. Repeat twice with a different color (or the same color, it doesn't matter) so that you have three pieces of yarn. 2. Tie the yarn together. Double knot to make the knot bigger. Ask Question.
How to tie a face mask?from byboe.com
HOW TO MODIFY A TIE FACE MASK If your face mask has a nose wire, locate the top of your mask. … Take the tie and make a small loop right next to the mask. … Pull it out and at the same time, pull the knot down to tighten. … Adjust the k not as close to the mask as possible.
How to make a beaded bracelet?
1. Prepare a Length of Stretch Cord. Cut a length of string that’s roughly 4 to 6 inches more than your preferred bracelet length. Affix a bead stopper around three inches from 1 end. Pre-stretch the elastic cable by taking a span around three inches long and then extending lightly.
How to make a long lasting elastic bracelet?
To make a long-lasting elastic bracelet, follow these other tips: Stretch your cord before stringing any beads. …. Make your bracelet the correct size. …. Tie your knot with some tension in the bracelet. …. Tighten your knot from all sides. …. After cutting the elastic cord, add a dab of glue to the knot.
What are the most popular beads?
The most popular beads are natural stone beads, including lava stone beads and obsidian stone beads. Natural stone is a quite heavy material and gives a beaded bracelet a luxurious and valuable feel. Beaded bracelets also look great worn stacked or alongside a wristwatch. ...
What is the best wire for stringing beads?
Flexible beading wire such as Soft Flex®, Beadalon, and Tigertail is a popular choice when it comes to stringing beads for necklaces and bracelets. It’s so flexible that it’s almost like a thread, except that it’s much stronger.
What kind of beads can I use for a bead?
You could even use plastic beads, including vintage Lucite beads, pony (kanji) beads, or designer oil beads out of a bead shop. Many types of shell and wood beads also do the job well.
How to stretch out a cable finish?
This can make it less probable that the knot will loosen up when you’re cutting them. When the adhesive has dried, gently stretch out every cable finish. After that, use embroidery scissors to trim the ends near the beads.
How to string beads with no needle?
Unless the beads are big enough to string with no needle, thread a collapsible eye or big-eye needle on the opposite end of the stretch string and fold on a two-inch tail. This step is optional if you use beads with huge holes in that circumstance, you may frequently string them straight on the cord.
