- Measure your ceiling and determine how much beadboard you need. Remember - you need all the stripes to go the same way.
- Determine where you would like trim lines to go to cover any gaps between boards.
- Cut your beadboard to size.
- Hold beadboard in place. Brad nail into the ceiling. If you can identify the ceiling joists (by knocking) be sure to pop some nails in there, too.
- Repeat until all the ceiling is covered.
- Add trim. Use trim to cover the seams and create a clean border around the edge.
- Caulk all seams and nail holes. If an edge is flat, you might want to use wood filler for a smooth finish.
- Sand if needed.
- Paint. We prefer to use our paint sprayer.
How to install bead board panel on a ceiling?
Tools:
- Tape measure
- Ladder
- Drywall lift (optional, but it’s a big help), ours is a 16′ model instead of an 11′ model for our vaulted ceilings
- Pry bar
- Laser level (optional but very helpful for lining up the boards)
- 16-gauge finish nailer
- Caulk gun
- Hammer and nail punch
- Stud finder, but more likely a Stud Buddy
- Chalk line or laser level and tripod
How to install 12 ft. beadboard planks for a ceiling?
Three Installation Options
- Install Easy Up tracks
- Snap on Easy Up clips
- Position planks and slide clips to secure for a flawless installation
How to hide the seam on a beadboard ceiling?
There is no easy way to combat a drywall seam, so, here are 10 clever ways to hide them:
- Apply a skim coat of setting compound.
- Use drywall tape.
- Sand the seam.
- Use dark or matte paint.
- Hanging up wall décor.
- Color washing technique.
- Use paper tape.
- Use better drywall mud.
How to install a beadboard paneled ceiling?
How to Install a Beadboard Paneled Ceiling
- Measure the ceiling and locate the ceiling joists. You can use a stud finder or just drill holes in the drywall until you hit resistance.
- Cut down the beadboard (including cut outs for lights and vents). We used a jig saw and it worked great.
- Install beadboard. ...
- Measure, cut, paint and install border boards. ...
- Add trim boards. ...
- Isn’t it beautiful? ...
How do you put beadboard on a ceiling?
Step One: Mark Your Ceiling Joists. ... Step Two: Create a Support Brace. ... Step Three: Cut Any Holes for Light Fixtures. ... Step Four: Apply Adhesive. ... Step Five: Nail the Panel Up. ... Step Six: Cut Your Trim. ... Step Seven: Fill in the Gaps. ... Step Eight: Finish Work.
Can beadboard be used for ceilings?
Although beadboard is typically thought of as a wall material, it's great for ceilings as well, and it's relatively inexpensive. By using tongue and groove beadboard, you can hide the nails for cottage feel with a seamless look.
Is it hard to install a beadboard ceiling?
Installing standard wood beadboard planks is challenging because each plank must be blind nailed to the ceiling joists, or to furring strips (boards installed on the ceiling perpendicular to the joists).
How do you install a 4x8 sheet of beadboard on a ceiling?
Measure the ceiling and locate the ceiling joists. You can use a stud finder or just drill holes in the drywall until you hit resistance.Cut down the beadboard (including cut outs for lights and vents). ... Install beadboard. ... Measure, cut, paint and install border boards. ... Add trim boards. ... Caulk, fill nail holes and paint:
Is beadboard ceiling expensive?
These packages are found in various materials, from more costly real wood varieties to less costly paneling options. Expect to spend more than $1 per square foot on real beadboard, while panel alternatives range between $0.50 and $0.70 per square foot.
How do you hide the seams on beadboard?
Apply wood putty In order to build up a strong patch over the seam, spread on an ample supply of wood putty. Then use a wide putty knife to feather it out, sreading a portion of putty both above and below the seam. Feathering it out and spreading the wood putty over a larger area will help hide the seam.
How do you attach beadboard to ceiling joists?
0:061:39How to Install a Beadboard Ceiling-DIY Network - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart the first piece 1/4 inch away from the wall with the tongue side towards the wall shoot toMoreStart the first piece 1/4 inch away from the wall with the tongue side towards the wall shoot to finish nails into each ceiling joist along the length of the board.
How do you nail beadboard?
2:374:13How to Install Beadboard Wainscoting | Wall Ideas & Projects - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply adhesive along the back of each panel. Then position it on the wall using the horizontal lineMoreApply adhesive along the back of each panel. Then position it on the wall using the horizontal line as a guide nail the panel into the studs hiding. The nail in the groove when. Possible.
What is the cheapest way to cover a popcorn ceiling?
Some of the cheapest options include covering it up with tongue-and-groove wood panels, drywall panels, prepared fiberboard ceiling planks/tiles, fabric, and paint patterns.
What is the cheapest way to cover a ceiling?
Here are some affordable ways to beautify your home's ceilings:Paint. It's a great way to change the perception of your space. ... Tin Tiles. Hide damage and uneven surfaces with tin ceiling tiles that introduce a vintage vibe. ... Moldings and More. ... Tiles or Planks.
Can you put beadboard over drywall?
Beadboard installs over drywall with panel adhesive. While the adhesive cures, use brads or nails to hold the panels in place temporarily. Review scribing techniques: Because room corners are rarely plumb, it may be necessary to cut panels so that they conform to irregularities.
Can you put beadboard over a popcorn ceiling?
Beadboard Planks Over Popcorn Ceiling DIY. Looking for a way to cover those outdated, popcorn ceilings while also adding character to your room? You can install beadboard planking directly on top of your textured ceilings.
What is beadboard on a ceiling?
Installing beadboard on your ceiling will transform the look of your entire setting. A ceiling is the largest visible surface in a room , its expanse broken only by a light fixture or fan. Beadboard draws the eye upward and creates visual texture.
How to make beadboard?
Here are the beadboard basics you need to know: 1 Pine is the most commonly used material in the creation of beadboard planks, which are approximately 5/16” thick, 3 ½” wide, and available in eight-foot lengths, such as these Hakwood Knotty Pine Beaded Planks (available from The Home Depot ). 2 Beadboard planks feature tongue and groove assembly, meaning one side of a plank has a tongue (protrusion) that runs the length of the plank, and the other side has a corresponding groove. When installed side-by-side this creates interlocking reinforcement that keeps the planks flat and even. 3 Pricewise, plan to spend approximately $1.50 per square foot (planks only) to cover a ceiling. Professional installation could add another $2 to $3.50 per square foot. 4 Though you may be familiar with installing tongue and groove hardwood planks on a floor, ceiling installation is more difficult, so you may wish to hire a pro. However, there’s a new (and more DIY-friendly) trend in beadboard ceiling planks—that runs $2.50 to $4.19 per square foot and is available in more than a dozen wood-tone shades—which we discuss further in the installation section.
What is beadboard?
Beadboards are flat planks with one or two “beads”—semi-circular, raised ridges—milled vertically into the face of the boards. When installed on a surface, it gives the appearance of two or three narrower boards side by side. Beadboard was traditionally used on the lower area of walls (i.e., wainscoting ), but it’s since become trendy for ceilings, ...
How does Armstrong beadboard work?
Armstrong’s WoodHaven Beadboard installs with special clips that attach directly to furring strips or joists without the need to blind nail each plank. The beadboard planks then slide right into the clips, which do not show from beneath. Installing each row of planks is a simple matter of attaching the clips and then sliding the planks into place. This creates a “floating ceiling” because the planks are held in place by the clips, not directly attaching them to joists or furring strips.
When did beadboard start to be used?
On interior ceilings, beadboard didn’t catch on in earnest until the 1950s, when it became a way to cover up old plaster with unsightly cracks. For country homes and farmhouses, beadboard was the updating material of choice, which is why it’s still associated with rural charm.
Is beadboard still popular?
Plus, it looked great! Beadboard remained popular through the Victorian era, but its appeal waned slightly during the Roaring Twenties when glamourous wallpaper came into vogue. Beadboard never completely disappeared, however, and still today it can be found in houses built in every decade of the past century.
Can you blind nailed beadboard?
Installing standard wood beadboard planks is challenging because each plank must be blind nailed to the ceiling joists, or to furring strips (boards installed on the ceiling perpendicular to the joists).
