how do you make a bench cushion with a zipper

by Ms. Tatyana Auer III Published 2 years ago Updated 1 year ago

Part of a video titled How to Make a Box Cushion with a Zipper - YouTube

2:11

8:20

Take the measurements of the perimeter and subtract the length of the zipper the width of thisMoreTake the measurements of the perimeter and subtract the length of the zipper the width of this fabric 54 inches is just enough for the boxing on this cushion.

Can you make a bench cushion without zippers or velcro?

How to Make Cushion Covers With Piping and a Zip. Make the piping. Cut a strip of your fabric on the bias, wide enough to wrap around your piping cord with a couple of cm left along the edge. Make your zip opening. Lay the right sides of your cushion panels together and pin together along the bottom edge. Sew the zip flap. Besides, how do you make a Velcro bench cushion?

How to sew a bench cushion?

Jun 02, 2015 · Get the fabric & supplies you need at OnlineFabricStore: https://www.onlinefabricstore.com/Want more info on this project, including written instructions? Fi...

How to make a zipper for a foam cushion?

Nov 24, 2012 · Add a zipper to a cushion instead of sewing it shut.

How do you put upholstery foam on a bench cushion?

Mar 21, 2019 · First thing you want to do is cut your muslin to the exact size of your foam cushion. Take your zipper and lay it upside down on your muslin. I wanted my zipper to be about ⅔ of the way to the edge. It is much easier to slide the cushion in the cover this way. Sew your zipper using your zipper foot on your sewing machine.

How do you make a simple cushion cover with a zip?

HOW TO MAKE ZIPPERED CUSHION COVERS | Sewing

Step 1 - Measure and Cut. ...
Step 2 - Sew One Side Leaving a Gap. ...
Step 3 - Baste the Gap. ...
Step 4 - Insert the Zipper Face Down. ...
Step 5 - Remove the Basting Stitches. ...
Step 6 - Stitch the Zipper Ends. ...
Step 7 - Fold and Stitch. ...
Step 8 - Press.

How do you put a zipper in a bench pillow?

Part of a video titled Bench Cushion, Zipper Option - YouTube

1:52

14:51

Right in the middle. So I'm going to figure three inches. And three inches I put it right in theMoreRight in the middle. So I'm going to figure three inches. And three inches I put it right in the middle then I want to add a 1/2 inch seam allowance to the top edge.

How do you make a bench cushion?

Cut everything to size

Cut a piece of 1/2" plywood to the exact same size as the top of your bench. Lay your piece of plywood on top of your bench foam, lining it up on two sides at a corner. Use a pen or marker to mark the other two sides. Cut the foam along the marks so that the foam is the same size as the plywood.Dec 22, 2020

How do you sew a bench cushion with zipper and piping?

Part of a video titled How to Make a Cushion with Piping | THRIFT FLIP Makeover - YouTube

7:25

10:17

Start pinning the fabrics together with the right sides facing. And the piping sandwich between theMoreStart pinning the fabrics together with the right sides facing. And the piping sandwich between the two pieces. Make sure that your corners are matched up perfectly so the seam is right on the edge.

How do you make a window seat cushion?

A small hand-saw or electric knife would probably work a lot better!

Step 1: Measure your window sill. Measure the width of the inside of your window from edge to edge. ...
Step 3: Purchase foam and and fabric to fit. ...
Step 3: Cut the foam to fit. ...
Step 4: Wrap foam in fabric and pin in place. ...
Step 5: Place on window and style.

Oct 26, 2020

What is an upholstery zipper?

Upholstery Zippers for Home Textiles & Upholstery.

Invisible Zippers are ideal for a subtle, hidden closure; the zipper tape hides the teeth, leaving your design as uninterrupted as possible. Upholstery Invisible Zippers are a popular choice for pillows and duvet covers as well as upholstered furniture.

How do you make a box bench cushion?

Part of a video titled How to Sew a Bench Cushion in 2 hours - YouTube

0:31

15:38

So the first thing that you need to do is measure your bench. Or whatever cushion size you want toMoreSo the first thing that you need to do is measure your bench. Or whatever cushion size you want to do and I'm going to teach you how to do this all for your own sizing. So mine's 42 long.

How thick should foam be for bench cushion?

In general, cushions of at least 50mm thick will be comfortable enough for a seating pad, 75mm for a bench or window seat, and approximately 100mm for a daybed.Aug 13, 2014

How do you make a cushion without a sewing machine?

Part of a video titled How to make envelope pillow cover | without sewing machine - YouTube

0:18

4:19

Take any pillow form and measured it from the both sides the length and the width. - 12 by 12 inchMoreTake any pillow form and measured it from the both sides the length and the width. - 12 by 12 inch then add one inch to both sides. And you will have 13 by 13 inch square with this measurement.

How do you make a piped cushion with a zip UK?

Part of a video titled How to sew a pillow with piping and zipper - YouTube

1:27

24:08

And then on the bottom i've notched it three inches in from the cut edge. So that i know how toMoreAnd then on the bottom i've notched it three inches in from the cut edge. So that i know how to place my zipper. And that's the only notching that you need to do for this pillow quite simple.

What is the best size piping cord for cushions?

To create piping measure the circumference of the cushion you want to pipe and add an extra 10cms to allow for a seamless join. Piping cord is sold in varying thicknesses, I recommend 5mm width 3 ply cotton cord for home furnishings.Jun 14, 2017

How do you make a box cushion with Velcro closure?

Cut material to size and pin in place. ...
Sew the two pieces of material together. ...
Turn it inside out. ...
Attach VELCRO® Brand Stick On for Fabrics Tape. ...
Insert the cushion inner. ...
Close the cushion cover.

Feb 19, 2020

How to open a zipper on a muslin dress?

After your zipper is sewn on, flip your muslin fabric to the other side. Cut through the fabric to expose the zipper part. This part isn’t visible so a few frays here and there didn’t bother me, but you can certainly clean up the edges if you want. Your zipper should open and close now on your bottom piece!

Do shoe benches need a cushion?

Our new shoe bench needs a cushion! You may remember that a few weeks ago we put a little leather drawer pull on our shoe bench to make it easy to open and close. It’s been working out great.

Can you use a cushion cover on a bench seat?

And by the way, this cushion cover is for a bench seat – but you can apply this same method to any type of cushion cover you need!

How to get corners of cushion cover out?

Turn your cushion cover right side out. Using your finger, the blunt end of a seam ripper, or the eraser end of a pencil, push each corner out as far as possible.

How to measure for a cushion?

Calculate the size of the bottom pieces. Add 6 inches to the length of the cushion. For this project, your first piece of fabric is 41 inches in length, so adding six inches would give you 47 inches. Now you're going to measure two pieces that will overlap about 1/4 or 1/3 of the way along the back. The depth of the piece stays the same as for the first piece of fabric -- 16 inches.

How to sew a corner on a quilt?

Position your needle so the first stitch will enter the fabric at the dot or circle you've drawn half an inch in from the corner. Keeping to a half-inch seam, sew the top fabric strip to the large piece of fabric, stopping at the mark near the corner. Cut the thread and move on to the bottom fabric strip, again beginning and ending at your corner marks. Press the seams toward the large fabric piece.

How big is a cushion cover?

Measure out two pieces of fabric -- one that is 17 inches (43.2 cm) by 16 inches, the other that is 30 inches (76.2 cm) by 16 inches. These will overlap on the back or bottom of the cushion cover, leaving an opening to insert the foam.

How to measure for a 40 by 15 bench?

Measure out the first piece of fabric, adding a half an inch to each side for seam allowance. For a 40 inch by 15 inch bench, you will need to measure out a piece of fabric 41 inches by 16 inches. The two pieces for the bottom or back of the cushion will overlap each other. This is called an "envelope" closure.

How to make a sleeve for a sleeve?

1. Lay out the biggest piece of fabric right or "good" side up. Take one of the long fabric strips and place it face down along the top of the piece, making sure the corners meet and the edges are even. Pin it in place. Do the same with the other long strip along the bottom of the fabric piece.

How to mark the corner of a piece of fabric?

After cutting out all the fabric, take a ruler and a pen or pencil and mark the corner of each piece of fabric on the back with a dot or circle one half inch in from the corner. These marks are important as they will tell you where to start and stop sewing at each corner.

How long should a zipper be on a cushion?

The height of the panel is the height of the foam plus 1” for the seam allowance, plus the width of the zipper. My zipper is 1-1/8″ across, so that’s a total of 5-1/8” for this cushion.

How to make a cushion look round?

For a more rounded look, use cushion wrap instead and wrap it all the way around the foam. Use a spray adhesive designed for foam to attach the padding or cushion wrap. Spray it onto the foam and lay the padding on top. Repeat for the other side. You’ll have time to reposition it.

How to make a zipper box?

Sew together one end of the zipper panel and one of the ends of the side boxing. Center the zipper on the back edge of the top panel with the right sides facing. Start sewing ½” from the end of the zipper panel. Continue to sew around the entire panel.

How to sew a zipper back and forth?

With the zipper foot close to the zipper, sew down the length making sure the center of the zipper remains in line with the seam. You may have to stop and move the pull tab so it’s not in the way. Repeat on the other side. Sew back and forth a couple of times at both ends of the zipper.

How to make a zipper on a sewing machine?

Cut down the middle of the fold. Open the seam and lay the zipper on top, facing down, so the center of the zipper is right on top of the center of the seam. Change the foot on the sewing machine to the zipper foot.

How to sew a zipper panel?

Fold the zipper panel in half lengthwise with the right sides facing. On the folded side, sew down the length using a seam allowance that is half the width of the zipper. For this zipper, the width divided by 2 is 9/16 of an inch.

How much space between zipper and boxing?

If it’s easier for you, you can leave about an inch or so of space between where you started sewing the zipper panel and where you stop sewing. Sew the end of the zipper panel and the end of the boxing together first, then go back and finish sewing that little bit of the boxing and the large panel together.