how do you make a big jenga set

^{How to Build a Giant Jenga Set}

1. Measure and Cut the 2x4's. Jenga is played with 54 pieces. 1 block needs to be as long as 3 blocks are wide. ...
2. Stack the Pieces and Measure for the Case. You can stack the pieces however you'd like to in order to measure for a case. ...
3. Cut Out the Pieces for the Carrying Case. I started by ripping down a piece of plywood I had to 16 1/2 inches wide for the top and ...
4. Layout and Cut the Carrying Case Handles. For the layout of the handles I first found the center point of both the left and right side boards.
Assemble the Box, Apply Finish, and Install Hardware. For the box assembly I used glue and wood screws to put everything together. ...
Sand and Apply Boiled Linseed Oil to the Blocks. This step is semi optional, but I'd highly recommend it. ...
Put the Pieces in to the Case and Take It to a Party! ...

Full Answer

How to build an outdoor Jenga set?

Part 1 Part 1 of 3: Cutting the Game Pieces Download Article

1. Wear safety glasses and a mask when using an electric saw. ...
2. Measure and cut the pieces. Use your tape measure and a pencil to mark 10½ in (26.7 cm) segments on the 16 in (40.6 cm) 2x4 boards.
3. Sand the cut edges of the game pieces. ...
4. Arrange the pieces on a flat area to play without a platform. ...

How to get better at Jenga?

• Villa Paletti certaintly comes to mind, as you are also removing wooden components from a structure, making it taller
• Bamboleo is a game in which you remove wooden blocks from a plate that is unstable. ...
• Stack Market is a game where you stack dice to influence stock market prices, if the stack collapses, so does the share price

More items...

How does Home Depot make giant Jenga?

Number of pieces: 54 Block material: pine

• Giant tumbling tower game creates hours of fun at your next party
• Stack each of these 54 blocks, then compete to de-construct the tower without it tumbling
• Durable wooden construction stands up to countless tumbles
• Heavy-duty carrying bag included so you can carry it to the park, tailgate, or backyard
• Tower reaches about 4 ft. ...
• Number of pieces: 54

More items...

How many pieces are in a life size Jenga?

Our life-size Jenga game instructions as-written makes 48 pieces. Each 8 foot long 2 x 3 will make 12 pieces so if you want a taller game, just cut up an extra board! If you use five 8 foot boards, you will end up with 60 pieces. How do you stack giant Jenga? Stack the blocks in sets of 3 parallel to one another.

How many 2x4 do I need for giant Jenga?

Materials Required If you have a miter saw and some 2x4s, you're ready to make an oversized version of this classic game. To build this outdoor jenga game you'll need 6, 8-ft. 2x4s, a miter saw and a sander.

How many pieces are in a jumbo Jenga set?

54 piecesJenga is played with 54 pieces. 1 block needs to be as long as 3 blocks are wide. The first layer is 3 blocks laid side to side, followed by another layer of 3 that are turned 90 degrees and placed on top of the previous row. After all the blocks are stacked you'll end up with a tower that's 18 layers tall.

What are the dimensions of giant Jenga blocks?

A Giant Jenga piece makes that look like a speck with dimensions measuring 3 cm x 5 cm x 15.25 cm—twice as big in each direction and eight times the volume! Each piece is that much bigger, and so is the fun you'll have when you try to force your opponents to topple a teetering tower that can reach more than 4 feet!

How do you make a giant Jenga storage box?

1:159:31DIY Giant Jenga Game Table / Storage Box - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo like I said this is a 4 foot by 4 foot you just need a half sheet will actually have a good chunkMoreSo like I said this is a 4 foot by 4 foot you just need a half sheet will actually have a good chunk left over and basically you're just going to draw a bunch of rectangles.

What is giant Jenga called?

It's called Jenga Giant, and you can bring the party to your backyard, basement, family room or wherever by ordering it on Jenga.com or Amazon. Even though it's huge — stacking up to a little over 5 feet tall, to be exact — it's the same old, Jeng-amazing game you know and love.

How do you make a Jenga game out of 2x4?

How to Make a DIY Giant Jenga Game15 Great DIY Summer Projects. View More.Step 1: Build the Giant Jenga Game Platform. ... Step 2: Gather 2x4s and Cut out the 54 Jenga Pieces. ... Step 3: Sand the Jenga Pieces. ... Step 4: Stack the Jenga Pieces up. ... Step 5: Play Jenga!

How tall is Jumbo Jenga?

Stacks to over 4 feet high in play! At setup, starts as nearly 22 inches, and can stack to over 4 feet high in play! With Jenga GIANT Genuine Game Hardwood Booster Pack (sold separately), the tower can stack to over 5 feet! Also sold separately, is our Jenga GIANT Heavy-Duty Carry bag.

What is the biggest Jenga?

1. Jenga Giant. Built by Hasbro, this is the largest official Jenga set. It comprises 54 premium hardwood blocks that are nearly 15 times the size of the classic variety.

How tall is the tallest Jenga?

The record for the highest known JENGA® tower is 40 complete stories with two blocks into the 41st, claimed in 1985 by Robert Grebler (US).

How do you stack giant Jenga blocks?

Stack the blocks in sets of 3 parallel to one another. You should end up with a tower that is 18 blocks (or levels) high. Each level should be stacked at a 90-degree angle to the previous level.

How many pieces of wood are in a Jenga game?

54A classic Jenga brand game consists of 54 precision-crafted, specially finished hardwood blocks. To set up the game, stack all of the blocks in levels of three placed next to each other along their long sides and at a right angle to the previous level.

How do you make a giant Jenga jello shot?

2:004:27HOW TO MAKE A JELLO SHOT GAME: DIY Giant Jenga WallYouTubeStart of suggested clipEnd of suggested clipThe souffle cups are about two and a half inches. And. And so is the piece of wood. So I had to useMoreThe souffle cups are about two and a half inches. And. And so is the piece of wood. So I had to use a two and a half inch hole saw to make these cuts.

Supply and Tool List For Giant Jenga Game

3/4″ plywood 18″x18″6 – 2″x4″ x 8′ pine boards to make 54, 10 1/2″ pieces1 – 2″x” x 6′ pine board to make the sides for 18″x18″ plywood baseCost: T...

Step 1: Build The Giant Jenga Game Platform

Cut the 3/4″ plywood to 18″x18″ using a circular saw or even a table saw. Then make a frame out of 2″x4″ boards. Cut two boards to 15″ and two boar...

Step 2: Gather 2x4s and Cut Out The 54 Jenga Pieces

With the 2″x4″ boards, we cut 54 Jenga pieces at 10 1/2″ each. I'd recommend setting up a ‘stop' on your miter saw to make the process go much quic...

Step 3: Sand The Jenga Pieces

Using either an orbital saw or a benchtop belt sander, we sand each piece smooth on the ends and the sides. We had a pretty good assembly line goin...

Step 4: Stack The Jenga Pieces Up

Place your constructed plywood and 2″x4″ platform on the ground and stack up the 2″x4″ Jenga pieces in rows of 3, alternating the direction of stac...

Step 5: Play Jenga!

This is a great, fun project to make with a friend or family members. This Giant Jenga Game is a hit at wedding receptions, family reunions, bbq's,...

Step 1: Measure and Cut the 2x4's

Jenga is played with 54 pieces. 1 block needs to be as long as 3 blocks are wide. The first layer is 3 blocks laid side to side, followed by another layer of 3 that are turned 90 degrees and placed on top of the previous row. After all the blocks are stacked you'll end up with a tower that's 18 layers tall.

Step 2: Stack the Pieces and Measure for the Case

You can stack the pieces however you'd like to in order to measure for a case. I chose to stack mine 6 pieces side by side, 2 pieces behind that end to end, and stacked up until I ran out of blocks. The measurements I got were 21 inches wide, 14 inches deep, and 10 1/2 inches tall.

Step 3: Cut Out the Pieces for the Carrying Case

I started by ripping down a piece of plywood I had to 16 1/2 inches wide for the top and bottom pieces. I went with 16 1/2 inches wide because this is the original 14 inch measurement +1 inch for the extra space on the inside, and also 1 1/2 inches for the width of the 2 side pieces.

Step 4: Layout and Cut the Carrying Case Handles

For the layout of the handles I first found the center point of both the left and right side boards. From the center I measured 3 inches in each direction, marked 2 lines, measured down 4 inches from the top and marked a line across the board, measured 2 inches down from the top and marked another line across.

Step 5: Assemble the Box, Apply Finish, and Install Hardware

For the box assembly I used glue and wood screws to put everything together. I started by gluing and screwing one of the sides with the handles to the top piece, I then put on the back, the other side with the handle, the two 4 inch pieces on the front, and then I put the bottom.

Step 6: Sand and Apply Boiled Linseed Oil to the Blocks

This step is semi optional, but I'd highly recommend it. You can play the game without sanding and oiling the blocks but they tend to be a little rough and sticky which makes it hard to play.

Step 7: Put the Pieces in to the Case and Take It to a Party!

Now that you're done with the blocks and the case load it up and take it to a party!

Step 1: Build the Giant Jenga Game Platform

Cut the 3/4″ plywood to 18″x18″ using a circular saw or even a table saw. Then make a frame out of 2″x4″ boards. Cut two boards to 15″ and two boards to 18″ using a circular or miter saw. Then, using a Kreg Jig and Kreg Screws, we attach the 2″x4″ cut boards to the plywood and to each other to form the base for the platform.

Step 2: Gather 2x4s and Cut out the 54 Jenga Pieces

With the 2″x4″ boards, we cut 54 Jenga pieces at 10 1/2″ each. I'd recommend setting up a ‘stop' on your miter saw to make the process go much quicker.

Step 3: Sand the Jenga Pieces

Using either an orbital saw or a benchtop belt sander, we sand each piece smooth on the ends and the sides. We had a pretty good assembly line going between me cutting the pieces and passing down the line to my brother and his fiance who were sanding.

Step 4: Stack the Jenga Pieces up

Place your constructed plywood and 2″x4″ platform on the ground and stack up the 2″x4″ Jenga pieces in rows of 3, alternating the direction of stacking every layer.

Step 5: Play Jenga!

This is a great, fun project to make with a friend or family members. This Giant Jenga Game is a hit at wedding receptions, family reunions, bbq's, or any other get together. See how long you can play until it all falls down! Have fun and build a DIY Giant Jenga Game!

Introduction

Easily make your own version of this classic game for tailgates or parties using simple tools. How will you stack up with this diy yard jenga?

Stack and Play

This is the easy part of this outdoor Jenga game. Stack your pieces in rows of 3 to make a total of 18 rows and challenge your family or friends and see who is the Jenga master.

Step 1: Planning Size

To make a proportional Giant Jenga game I used 2x3s (actual size 1.5"x2.5") cut to 7.5 inches long. By using this dimension it will yield a proportional looking game. The number of 2x3s you buy directly relates to how tall you want the game to be.

Step 2: Cutting the Pieces

Using whatever saw you have access to, cut the 2x3s into 7.5" long pieces. To make this process faster I set up a stop block on my miter saw. While this was the most time efficient method the same job can be done with a hand saw.

Step 3: Cleaning Up the Pieces

To match the cut edges with the factory round over I used my router to chamfer the edges and make the blocks a little easier on the hands. While this is totally unnecessary it can be done with heavy grit sandpaper.

Step 4: Sanding

Depending on where you got the lumber from it could be pretty rough being that it is sold for construction. So a sanding is pretty important. Being that there can be many blocks this can be a pretty time consuming process. I used my orbital sander with 80, 120, and 220 grit sandpaper to leave a nice smooth to the touch finish.

Step 5: Final Finishing and Enjoying!

Now finishing is all up to you but I left the blocks raw because people would be writing messages on them at the wedding. Although I did brand my logo on all the pieces with a hot iron. Overall I think this project came out great and it was a big hit at the wedding! If you guys have any questions feel free to ask below.

Making the Jumbo Jenga pieces

Cut the 2×3 boards into 7 1/2″ long pieces, you should be able to get 12 – 7 1/2″ pieces from each 2×3 board. I used a miter saw and set up a stop block on the left side so I didn’t have to measure every piece.

Making the Carrying Crate

Cut the 4 pieces of 1×8 to be 19 3/4″ long. Use a countersink bit (or a regular drill bit about the size of the screw shank) and drill holes for the screws as shown in the sketch. The holes should be about 3/8″ away from the side and evenly spaced.

Making the Dice

Cut a piece of 4×4 to a cube, 3 1/2″ x 3 1/2″ x 3 1/2″. Paint each of the 6 sides a different color (one side will stay natural wood.) After the paint has dried, lightly sand the edges to distress as desired.

How to make jinga blocks?

How to make Jenga blocks? Firstly, for the convenience of cutting, it is recommended to tightly bind the bars with a scotch-tape. Then mark with a pencil the places where you are going to saw off the bars. This will help you speed up the process and not make a mistake with the size.

What is the meaning of Jenga in Swahili?

In Swahili, the word Jenga means “To build something”.

Is it difficult to make a homemade Jenga?

As you can see, there is nothing difficult to make a homemade Jenga and the number of pros is much higher than the cons. You will not only save you money but also spend priceless time with your child making a game together.

Can Jenga bars be varnished?

To ensure that the bars last longer and become even more beautiful, they can be varnished or painted. The last stage of making DIY (do-it-yourself) giant Jenga (or you can create a traditional-sized game, it all up to you) is preparing a beautiful box for storing wooden bars.