Bird Feeder from Wire & 2-Liter Bottle Here is a simple way to reuse a 2-liter bottle to provide a 'smorgasbord' for our fine feathered friends. 2-Liter Bird Feeder takes steel wire and a 2-liter bottle and through some twists and turns of wire bending a bird feeder is created.
- Clean the Bottle. Clean and dry the bottle thoroughly, removing any labels. ...
- Attach the Hanger Hook. Screw the hook into the center of the bottle's cap, making sure it is firm and tight. ...
- Add Perches. ...
- Cut Feeding Ports. ...
- Fill With Seed. ...
- Hang the Feeder.
How to build a bird feeder with a plastic bottle?
You can also use plastic water bottles or soda bottles in other ways to help birds:
- Use bottles to create a loose, movable baffle to keep squirrels from climbing poles or wires and getting into your bird feeder.
- Cut the bottom off a large bottle and use the plastic disk to create a roof shelter for a small feeder.
- Convert half a bottle into a simple ant moat to keep insects out of nectar feeders.
How to make bird feeder out of plastic bottle?
Make a bird feeder from a plastic bottle Materials: • One plastic drink bottle with cap (works best with a round bottle) • Two willow sticks about 20cm long (a bit longer if using a 1- or 2 ...
How do you make a homemade bird feeder?
Steps
- Spread the peanut butter all over the toilet paper roll with the butter knife
- Pour some birdseed on the plate and roll the toilet paper roll on it
- Slide the bird feeder onto a tree branch
How to make a bird feeder from a liquor bottle?
These 12 DIY Wine Bottle Feeder Ideas are the perfect way to utilize your wine bottle collection.
- Booze Bottle Feeder. Put on your safety glasses and turn a simple beer or wine bottle into one of the above bird feeders.
- Wine Bottle Bird Feeder. Tighten a wine bottle to a bird feeder channel with a clamp to imitate the feeder idea here. ...
- Glass Bottle Bird Feeder. ...
- Fish-Shaped Bird Feeder. ...
- DIY Bird Feeder. ...
- Bottle Bird Feeder. ...
- Bottle Feeder For Birds. ...
How do you make a bird feeder out of a 2 L bottle?
1:372:37Kids Craft: How to make a Bird Feeder out of a 2 liter bottle - YouTubeYouTubeStart of suggested clipEnd of suggested clipOr you can tie a pipe cleaner or any other kind of string around the top of the rim and just fill.MoreOr you can tie a pipe cleaner or any other kind of string around the top of the rim and just fill. The bottom with bird food. And you should have birds coming to your new recycled bird feeder.
How do you make a simple bird feeder out of a plastic bottle?
1:062:30How to make a Bird Feeder from a Plastic Bottle - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the drawing pin. And the scissors to make some drainage holes in the bottom of the bottle. AboutMoreUse the drawing pin. And the scissors to make some drainage holes in the bottom of the bottle. About four centimeters above each perch. Use the drawing pin once again to make a slight hole.
How do you make a bird feeder out of a water bottle?
DirectionsNear the bottom of the bottle, cut a little larger than a quarter size hole into the side of the bottle. ... Repeat step 1 higher up on the bottle for the other spoon.Tie a piece of twine around the neck of the bottle as a hanger for the birdfeeder.Fill the bottle with the birdseed and hang your feeder outside.More items...
How do you make a bird feeder step by step?
StepsCut a large hole in the center of one side of the carton, starting several inches from the bottom.Beneath this large hole, cut a small hole to poke a stick through. ... Cut two small holes on either side of the top of the carton to thread the rope or wire through.Paint and decorate your feeder.
How can I make a cheap bird feeder?
A water or milk jug winter bird feeder is easy to make and inexpensive. Rinse out the jug, cut open the sides, cut or drill holes for a thin dowel or chopstick perch, add the birdseed and hang it in a tree.
How do you make a hummingbird feeder out of a 2 liter bottle?
Fill a plastic soda bottle with nectar (sugared water). Free paper filling funnel included. Hummingbirds love the color red and sweet liquids! Twist the bottle onto the feeding tray, add the netting, and hanger.
How do you make a bird feeder with a plastic bottle and spoons?
Push the wooden spoons through the holes, so the handle end goes through the smaller hole and the spoon end is through the larger hole. Use the funnel to add the bird seeds to the bottle. Then put the lid on the bottle.
How do you attract birds to drinking water?
Place your birdbath in the shade if possible, to keep the water cooler and fresher. Having trees nearby will also provide branches on which they can preen. Arrange stones (or branches) in the water so birds can stand on them to drink without getting wet (this is particularly important during freezing weather).
What can you make out of plastic bottles?
Here's 60 different ways you can reuse your everyday plastic bottles.Bird Feeder. Making a bird feeder is easy! ... Terrarium. This one is such a fun activity for kids! ... Egg Yolk Sucker. This little food hack is a game changer! ... Bottle Top Bag Seal. ... Piggy Bank. ... Watering Containers. ... Hanging Basket. ... Pencil Case.More items...•
How do you make a bird feeder out of a plastic bottle Wikihow?
To make a recycled bird feeder, start by using a thumbtack to poke 2 holes in a plastic bottle on opposite sides near the bottom. Then, widen the holes with a pair of scissors, and insert a dowel rod, pencil, or wooden chopstick through one hole and out the other to create a perch.
How do you make a bird feeder out of a wine bottle?
Glass Bottle Bird Feeder Wrap copper wire around a bottle so that the end of the bottle has an S shape hook for hanging. Fill the bottle with bird seeds and add feeder base to the mouth of the bottle.
How do you make a good bird feeder?
5:5511:02I Like To Make Stuff - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen before gluing them up I flipped the pieces around and cut the same angle on both sides. So IMoreThen before gluing them up I flipped the pieces around and cut the same angle on both sides. So I decided to add a little detail to the edge just to the same angle on the outside edge.
How to fill a plastic bottle with bird seeds?
Now the plastic bottle is ready to be filled with bird seeds. Before beginning to fill the bottle, take out the wooden spoons. Tape the openings. This will prevent the bird seeds from falling out (as shown in image).
How to hang a spoon from a plastic bottle?
Now that you have both wooden spoons inserted in the plastic bottle, it is time to tie the string onto the cap of the bottle in order to hang it from a tree. Draw a small line (as shown in image) on the cap of the bottle with a dry erase marker. Using the utility knife, carefully cut the line drawn. Now insert the string (as shown in image). Pull it through and make a small knot (as shown in image).
How to wrap a 2 liter bottle?
Fill the 2-liter bottle with water and put the cap on tight. This gives a semi-ridged form to wrap the wire around. 1. Wrap one of the steel hanger wires around the 2-liter bottle 3 or 4 times.
How to make a syringe for a bottle?
Take a 3-1/2 foot length of wire and center it on the bottom of the 2-liter bottle. Then bend the wire up the sides parallel to the bottle. It's better to have extra wire extending past the top of the bottle rather than to be a bit short. The wire length can be trimmed later if needed.
What bird pulls sunflower seeds from a water bottle?
A small songbird pulls sunflower seeds from a plastic water bottle feeder. A small songbird pulls sunflower seeds from a plastic water bottle feeder. This juice bottle is now filled with seed, and birds such as sparrows and finches have sturdy pencil perches to land on.
How to make a washer out of string?
Cut a length of string approximately 20 inches in length. Tie one end around the washer, and feed the free end in through the bottom of your plastic container, and out through the top of its cap or lid. Close the cap tightly, and tie a knot on top of it to keep it in place.
How to keep a perch from sliding away?
You’ll feed just enough of your skewer (or chopstick) through that back hole so it can be secured, but not protrude too much. Take your glue and use it liberally around the outside of that protrusion to hold the skewer in place. This keeps glue away from the feeding hole, but will keep the perch from sliding away.
