How to Start a Lanyard Box Stitch
- Cut the lanyard material to size. The length should be nine times the length of the finished product.
- Lay the two pieces of lanyard material perpendicular to each other, forming a cross. ...
- Start with one color and fold over one end of that color. ...
- Take one end of the other color and fold it over on top of the first strand.
Full Answer
How to start a lanyard box stitch?
How to zipper stitch lanyard:
- Cut three pieces of lanyard. …
- Start weaving! …
- Bring it around behind the second short string and in front of the first. …
- Knot your piece to finish it off.
- Slide a hook or key chain into the knot.
How to easily sew a lanyard?
How to Sew a Lanyard
- Form the DIY lanyards base. Start this homemade lanyards project by cutting out a fabric strip 3 inches wide by 36.5 inches long (93cm x 7.5cm).
- Prepare the fabric for sewing. Fold the fabric in half along its length with the wrong side in, and press it. ...
- Sew the fabric lanyard. ...
- Insert the clamp and stitch. ...
- Finish making lanyard. ...
How do you make a triple box stitch with lanyard?
List of Lanyard Stitches
- Butterfly Stitch. The butterfly stitch, one of the simplest lanyard stitches, is made from a series of slipknots. ...
- Cobra Stitch. The cobra stitch is a series of knots around a central strand. ...
- Box Stitch. The box stitch, or square stitch, is the basic standard for many complicated lanyard stitches. ...
- Circle Stitch. ...
- Triangle Stitch. ...
How to make a lanyard with a free pattern?
To make one lanyard you’ll need:
- two 2 1/8″ x 40″ strips of fabric (one of each print)
- one 3.75″ x 2″ strip (there’s two in the picture but you only need one)
- one .75″ x 40″ strip of felt, thin cotton quilt batting, or fusible fleece
- one 1″ swivel snap clip
How do you make a box lanyard step by step?
1:264:22How to start a lanyard box stitch (including pictures) - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight side and cross it over the blue string. Now I'm going to take four blue string going to takeMoreRight side and cross it over the blue string. Now I'm going to take four blue string going to take the side that is pointing upward move it over the orange string.
How do you make a beginner lanyard?
1:127:47The box stitch Lanyard - Classic Camp Crafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut um two rafts but only one wrap on the back here finger. Then you're going to put the other cordMoreBut um two rafts but only one wrap on the back here finger. Then you're going to put the other cord or the other string. Under those top two loops. And match the ends and pull to find the center.
How do you make a homemade lanyard?
0:191:30Learn with JOANN: How to Make an Easy-Sew Lanyard - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure not to get it twisted slip the ring onto one end of the strip. Join the two ends. TogetherMoreMake sure not to get it twisted slip the ring onto one end of the strip. Join the two ends. Together stitch about a half inch in back and forth and trim fold. It back to and close the ring.
How do you make a string lanyard?
0:201:34How to Make a Lanyard - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep 3 weave the far left cord under the two Center cords and then over the top of the right strand.MoreStep 3 weave the far left cord under the two Center cords and then over the top of the right strand. Pull the cords as tight as possible as you go maintain a tight weave. So the lanyard won't unravel.
How do you make a 3 strand lanyard?
0:052:04Triangle (3-Strand) Stitch - Starting/Doing the Stitch - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by taking all three pieces on one end and tie a knot leaving about an inch or two of GIMPMoreStart by taking all three pieces on one end and tie a knot leaving about an inch or two of GIMP hanging off after tying the knot separate.
How do you make a no sew lanyard?
0:503:13DIY No sew Disneyland Lanyards - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then two with ribbon. So we're cutting the strip that's long enough wide enough to fold in bothMoreAnd then two with ribbon. So we're cutting the strip that's long enough wide enough to fold in both sides. So we're just gonna iron it nice and flat.
How do you make a wristlet lanyard?
1:124:38Wristlet Keychain - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo once that's rolled over each side you can kind of use your clapper. Sometimes just a weightedMoreSo once that's rolled over each side you can kind of use your clapper. Sometimes just a weighted clapper helps to keep that fold that interfacing it really does pop up a little bit.
How do you start a double box lanyard?
1:436:51Double box Lanyards - Classic Camp Crafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you're going to start just as you with the Box stitch so trap in the loose end by weavingMoreAnd then you're going to start just as you with the Box stitch so trap in the loose end by weaving this over the loose end into a loop. And same thing with this. Side.
How do you make a 6 strand lanyard?
0:499:47Hexagon (6-Strand) Stitch - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd make a knot at one end leaving a few inches of GIMP on the other side of the knot. Then separateMoreAnd make a knot at one end leaving a few inches of GIMP on the other side of the knot. Then separate your strands in six different directions.
Step 1
Cut two pieces of different-colored lanyard lace the same length. Bring the ends of both pieces of lanyard together, to form four strands. Run your fingers down the strands until you hit where the strands fold. Begin your stitch here, at the middle.
Step 2
Place one piece of lanyard over the other in the middle to form a cross shape.
Step 3
Hold the center of where the strands cross between your thumb and forefinger.
Step 4
Take one strand and bring it over your fingers to create a loop. Do this on the opposite side to form another loop that goes in the opposite direction. You should now have two loops going in opposite directions that are the same colors. Hold these loops in place with your fingers of the hand that's holding the lanyard.
Step 5
Take one end of the free strands of opposite color. Bring it over the loop it's closest to and under the loop it's furthest from. Do this on the opposite side to make it go in the opposite direction. Make the opposite strand go over the loop it's closest to and under the loop it's furthest from.
Step 6
Take all four strands and pull them slowly so they come together. Pull them until they're tight and secure.
Step 1
Form loops with the same colors you used when you completed the starter stitch.
Tips
Always use more paracord than you think you’ll need. You don’t want to get all the way toward the end of your project, only to find out you don’t have enough paracord.
About This Article
This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.
