Instructions:
- Decide on the length of your bracelet and the design you want to create with your beads. ...
- Cut a 12" length of the Stretch Magic cord.
- Prestretch the cord by holding one end of the cord and pulling it between the thumb and forefinger of your other hand, to gently stretch it. ...
- Begin stringing your beads. ...
- Cut the elastic to length.
- Prestretch the elastic cord.
- Secure the end of the cord.
- Lay out your beads.
- String the beads onto the cord.
- Tie a knot to secure the beading cord.
How to make your own bracelets?
The method used can be simplified into these steps:
- Draw the pattern on a square-grid paper (download grid papers here ).
- Split up the pattern in small equivalent pieces, as small as possible.
- Take one of the pieces and use this to color the knots in a "pattern-map".
- "Solve" this pattern-map by coloring the threads between the knots.
- Determine what type of knots your map contain.
How to make bracelets with string and beads?
To make a long-lasting elastic bracelet, follow these other tips:
- Stretch your cord before stringing any beads. Your bracelet will stay the right size and won't stretch out leaving gaps between the beads.
- Make your bracelet the correct size. ...
- Tie your knot with some tension in the bracelet. ...
- Tighten your knot from all sides. ...
- After cutting the elastic cord, add a dab of glue to the knot. ...
- If possible, cover your knot. ...
How to make homemade bracelet?
Part 3 Part 3 of 4: Making a Bracelet Download Article
- Try making a beaded bracelet. A simple beaded bracelet is a great way to begin making handmade bracelets.
- Add beads to your bracelet wire. Begin by stringing your beads onto the wire still attached to the spool.
- Determine your bracelet length. ...
- Add a jump ring to an end of your bracelet. ...
- Secure an end to your bracelet. ...
How to make beaded bracelets with elastic?
Method 2 Method 2 of 4: Making a Stretchy Bracelet
- Gather your supplies. Stretchy bracelets are the easiest to make, and require the fewest tools. ...
- Measure your wrist and cut the elastic a little bit longer. Take the beading elastic and wrap it one and a half times around your wrist.
- Stretch the elastic. ...
- Fold some tape over one of the ends of the elastic. ...
- Put the beads onto the elastic. ...
How do you make clear string bracelets?
0:321:55How to Tie Stretchy Bracelet Strings so They Stay Together - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake your knot by going over one direction. And then you want to go over the top the other directionMoreMake your knot by going over one direction. And then you want to go over the top the other direction. And make your first knot. And then you cross and go over the top the other direction.
How do you securely clear a stretch cord?
1:222:33HOW TO Tie A Stretch Cord Knot - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd wrap it around and under and into the circle and then pull it up and you get this nice twistMoreAnd wrap it around and under and into the circle and then pull it up and you get this nice twist with a circle so a twist on the top and the bottom then you are going to pull it all together.
What is the best material to use for stretch bracelets?
Create Homemade Accessories with the Best Elastic String for Jewelry MakingStretch Magic Beading Cord. This super-sturdy, 1-millimeter spandex cord comes on a 16-foot roll. ... Beadaholique Beadsmith Opelon Elastic White Beading Cord. ... Darice Elastic Cord. ... Mandala Crafts Elastic Cord. ... Beadnova Crystal String Cord.
How do you make a stretchy string bracelet?
1:179:37How to Secure a Stretch Cord Bracelet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd go ahead and send them all the way down your stretch cord there. Now we love using opal on it'sMoreAnd go ahead and send them all the way down your stretch cord there. Now we love using opal on it's the best that we found it has the most flexibility. And string.
What is Stretch Magic made of?
Stretch Magic is a strong elastic-like cord. It is constructed of a mixture of polyester and polyurethane. Unlike some elastic cords, Stretch Magic will not fray over time.
How do you tie a bracelet knot so it doesn't come undone?
0:071:59How to Knot Elastic Bracelets and Make the Knot that doesn't brakeYouTubeStart of suggested clipEnd of suggested clipAnd begin the first section of your knot. So that's just like a basic overhand knot. But this timeMoreAnd begin the first section of your knot. So that's just like a basic overhand knot. But this time we're now going to take the right strand. And place it over the left so I've reversed.
Why do my stretch bracelets keep breaking?
The shampoo and soaps in the shower, hair sprays, perfume, body lotions, and sunscreen all do their part to help break down and weaken the elastic over time, eventually causing it to snap. Take elastic bracelets off before applying lotions or sprays.
What cord is used for bracelets?
Wire Cable These stringing cables do not kink unless extremely abused. The more strands they have, and the thicker the diameter, the more durable they are (e.g. 49-strand cable is stronger than 7 strand). Beading cable is very popular for stringing necklaces and bracelets, and some types of earrings.
How do you make a double strand stretch bracelet?
0:522:19Stretch Cord and Making a Two Stranded Bracelet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a simple pattern to follow. Start by threading the cord through one of the top holes of theMoreThis is a simple pattern to follow. Start by threading the cord through one of the top holes of the square connector beads. And then thread a pearl followed by a gold round bead.
How do you make an adjustable cord bracelet?
Bracelet IdeasGather Your Cord and Begin Looping. ... Wrap Three Loops. ... Insert Cord End Through the Loops. ... Pull the Cord End Through the First Loop. ... Adjust and Tighten the Knot. ... Continue Tightening the Knot. ... Using the Sliding Knots for an Adjustable Bracelet or Necklace. ... Adjusting the Knots.
How do you make elastic bracelets?
8:2213:44How to Make Loom Bands. 5 Easy Rainbow Loom Bracelet ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake a normal fishtail stitch by pulling the bottom band over the top ones put on another band. AndMoreMake a normal fishtail stitch by pulling the bottom band over the top ones put on another band. And again pull the bottom band over the top.
How do you make bracelets with string?
2:268:00How to Make DIY Friendship Bracelets Beginners (Diagonal Pattern)YouTubeStart of suggested clipEnd of suggested clipAnd then you push it up like that so this is tight.MoreAnd then you push it up like that so this is tight.
How do you use a stretch cord?
1:272:26How To Use Jewelry Elastic Cord - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn your beads tying a knot left over right right over left is good. And then just add a dab of glueMoreOn your beads tying a knot left over right right over left is good. And then just add a dab of glue a strong glue like superglue. Or ease 6-thousand.
How do you use a stretch cord for exercise?
0:022:05Resistance Cord Exercises for Strong Arms - YouTubeYouTubeStart of suggested clipEnd of suggested clipFeet about hip width apart. You want about the same amount of material between the handles and yourMoreFeet about hip width apart. You want about the same amount of material between the handles and your feet on both sides. And you're going to get a good posture with shoulders back tight abs curl.
What size cord should I use for stretch bracelets?
Many people also wonder what the best cord is for making stretch bracelets and I’ve found that the Stretch Magic cord in the .7mm size is a very good all-purpose cord for stringing these bracelets. But before starting to string your bracelet on your stretch cord, give it a “pre-stretch”!
How to make a magic bracelet with a string?
Cut a 12" length of the Stretch Magic cord. Prestretch the cord by holding one end of the cord and pulling it between the thumb and forefinger of your other hand, to gently stretch it. Pull and gently stretch it like this three or four times. Begin stringing your beads.
How to make a knot stronger?
Then pull the knot tight as usual. This gives you a knot that’s more durable. #6 – Reinforce the Knot With Clear Nail Polish.
How to do a surgeon's knot?
This knot is done by making the first half of the knot as usual, and when doing the second half of the knot, pass the end of the cord under and through one additional time. Then pull the cord tight to finish the knot.
What size stretch bracelet should I use for a small adult?
And when it comes to deciding how long to make a stretch bracelet, a small adult size is 7″, medium is 7.5″ to 8″, large is 9″, and plus size is 9.5″. I have tiny wrists so I usually do a 7″ size.
Is it hard to make stretch bracelets?
Once again, making stretch bracelets is not that hard. However as with most DIY projects, I’ve learned that having some helpful tools and knowing a few little handy tricks makes the project more enjoyable. Here are six tips I’ve found helpful to know as you complete the steps to make your own stretch bracelets:
Can you make stretch bracelets with cord?
When it comes to making your own jewelry, DIY stretch cord bracelets are probably one of the easier things you can make. After all, even little kids can string beads onto some cord, right? So true – BUT – I’ve learned that there are a few little tools, tips, and tricks that make the whole process go a little more smoothly and give you a finished homemade stretch bracelet you can enjoy.
How to make a beaded bracelet with elastic cord?from thesprucecrafts.com
Tighten your knot from all side s. Pull the top two ends to tighten the knot, pull from the beaded side, pull the left loose end and the right beaded end and vice versa. After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well.
How to make a magic bracelet with a string?from themakeyourownzone.com
Cut a 12" length of the Stretch Magic cord. Prestretch the cord by holding one end of the cord and pulling it between the thumb and forefinger of your other hand, to gently stretch it. Pull and gently stretch it like this three or four times. Begin stringing your beads.
What glue to use to make elastic cord?from thesprucecrafts.com
After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well. Some people think that super glue can erode the elastic over time. E6000 stays flexible so it is probably a better choice.
Why are elastic bracelets so popular?from thesprucecrafts.com
Fashion trends come and go, but elastic bracelets remain popular because they are versatile and easy to wear. They are also easy to make, and they can last for a long time if you follow these tips. Start by making your stretch bead bracelets with good quality elastic cord meant for jewelry making. Do not buy an elastic cord meant ...
How to keep beads from falling off a spool?from thesprucecrafts.com
String your beads on the elastic while it is on the spool, or use a bead stopper to avoid having the beads slip off the cord.
How to tie a knot on a bracelet?from thesprucecrafts.com
Tie your knot with some tension in the bracelet. In other words, pull the elastic so it is taut and just a little stretched when adding the second half of the knot. The extra tension from the inside helps keep the knot from untying.
How to care for elastic bracelets?from thesprucecrafts.com
Follow these tips to make them last: Always put your elastic bracelet on the right way . This is one of the main factors in bracelets that don't last. Never put on your bracelet by stretching it over your hand. As much as possible, roll it over your hand ...
How to hide a knot in a bracelet?
If you want to hide your knot, you’ll also need 1 bead with a larger hole to be strung first. Step 2 – when all of your beads are strung, test the size around your wrist. If the size feels good, tie a knot, pulling securely. Make sure not to pull too tightly, you don’t want to take out all the stretch.
How to make a charm with beads?
A meaningful charm or tassel, and findings to connect it to the cord. Step 1 – Cut 11” of stretch cord. (Tip: if you use a bit of adhesive along the end and then cut a touch off at an angle, you will have a easier time stringing your beads). Begin stringing your beads. You will use approximately 22 8mm round beads.
What is stretch cord?
There are three popular types of stretch cord: The first (and probably most common) is a rubbery, round cord made up of a single strand. Some of the more popular brands are PowerCord and Stretch Magic . Stretch Magic and similar cards come in a wide range of sizes, including large sizes that are perfect to use with large beads.
What is a cord used for?
This type of cord is often used for hair accessories or other applications where the cord will remain visible in the finished design. You can also use it for stringing larger beads; but because of its bulk, its knots may be a little harder to hide. This is not a cord that is meant to be used for long lasting jewelry.
How to keep a surgeon's knot?
Using a surgeon's knot (with an extra half knot) is the most secure way to keep them tied. Many people add a drop of super glue or E6000 to ensure the knot stays securely tied. The second type of cord is called stretch floss. It's available in a variety of colors but not a lot of sizes.
What are the downsides of stretch magic?
One downside to a cord-like Stretch Magic is that it can be slightly more difficult to knot tightly than other types of stretch cord. Stretch Magic, and other cords like it, are very reliable.
Can you use elastic thread with gemstone beads?
Unfortunately, not all gemstone beads are appropriate to use with elastic thread because of that.
What is the best stretchy cord for jewelry?
We think Stretch Magic is one of the best stretchy cords out there for jewelry making.
What is stretch cord?
Stretch cord is simple to use and incredibly cost effective. Stretch Magic is perfect for beaded bracelets for men, children's crafts, aromatherapy bracelets using essential oils, and so much more. You are going to be amazed by how easy it is to use this cord for beading bracelets and funky jewelry.
What do you need to start out with stretchy cord?
All a beginner needs to start out with stretchy cord is some beads, scissors or a bead nipper, and some glue and they have everything necessary for a jewelry design. An accomplished beader will have fun creating a quick design with stretchy string.
What is elastic bracelet?
Using elastic for bracelets takes away the learning curve that advanced beading wire, cord and fiber require. Elastic is the perfect bead stringing cord for a beginner and it is wonderful for a quick jewelry design.
How to hide a knot in a bead?
One way is to use beads with larger holes. Simply move the knot so it rests inside a bead. If you are determined to make sure the knot stays, you can glue it in place - but that might cost you a bead in the long run. Another option is to use spacers with large holes. You can hide the knot inside a spacer, if your beads have smaller holes, your knot will never move. Another fun way to finish a design is to use a bail with a large hole. You can conceal the knot in the bail and then add a fabulous dangle to your jewelry design.
How thick is a 7mm cord?
.7mm is .027 inches, or between 1/64 - 1/32" thick. This diameter is great as an all purpose bead stringing cord. Most bead sizes will fit comfortably on this cord. Keep this stocked in your beading toolkit as your go-to diameter for every day beading.
How thick is stretch magic?
Stretch Magic 1mm. 1mm is .039 inches, or slightly over 1/32" thick. This diameter is great for larger beads and gemstones. It is strong and durable. If you are using a chunky, abrasive bead, like Turquoise, glass, or coral, you may want to consider using a bead stringing wire as they can tear into the elastic cord.
How to make a beaded bracelet with elastic cord?from thesprucecrafts.com
Tighten your knot from all side s. Pull the top two ends to tighten the knot, pull from the beaded side, pull the left loose end and the right beaded end and vice versa. After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well.
How to tie a bracelet with elastic?from thesprucecrafts.com
Cut a piece of cord the size of your bracelet, plus leave yourself at least three inches of elastic on each side to tie your knots. The cord is slippery and nothing is worse than having everything exactly like you want it, and then dropping the end during tying.
How to make a magic bracelet with a string?from themakeyourownzone.com
Cut a 12" length of the Stretch Magic cord. Prestretch the cord by holding one end of the cord and pulling it between the thumb and forefinger of your other hand, to gently stretch it. Pull and gently stretch it like this three or four times. Begin stringing your beads.
How to string beads on elastic?from thesprucecrafts.com
String your beads on the elastic while it is on the spool, or use a bead stopper to avoid having the beads slip off the cord. Pre-stretch your cord by pulling on each end before stringing. This is a really important step. 02 of 04.
What glue to use to make elastic cord?from thesprucecrafts.com
After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well. Some people think that super glue can erode the elastic over time. E6000 stays flexible so it is probably a better choice.
Why are elastic bracelets so popular?from thesprucecrafts.com
Fashion trends come and go, but elastic bracelets remain popular because they are versatile and easy to wear. They are also easy to make, and they can last for a long time if you follow these tips. Start by making your stretch bead bracelets with good quality elastic cord meant for jewelry making. Do not buy an elastic cord meant ...
How to keep beads from falling off a spool?from thesprucecrafts.com
String your beads on the elastic while it is on the spool, or use a bead stopper to avoid having the beads slip off the cord.
How to make a beaded bracelet with elastic cord?from thesprucecrafts.com
Tighten your knot from all side s. Pull the top two ends to tighten the knot, pull from the beaded side, pull the left loose end and the right beaded end and vice versa. After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well.
How to make a magic bracelet with a string?from themakeyourownzone.com
Cut a 12" length of the Stretch Magic cord. Prestretch the cord by holding one end of the cord and pulling it between the thumb and forefinger of your other hand, to gently stretch it. Pull and gently stretch it like this three or four times. Begin stringing your beads.
What glue to use to make elastic cord?from thesprucecrafts.com
After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well. Some people think that super glue can erode the elastic over time. E6000 stays flexible so it is probably a better choice.
Why are elastic bracelets so popular?from thesprucecrafts.com
Fashion trends come and go, but elastic bracelets remain popular because they are versatile and easy to wear. They are also easy to make, and they can last for a long time if you follow these tips. Start by making your stretch bead bracelets with good quality elastic cord meant for jewelry making. Do not buy an elastic cord meant ...
How to keep beads from falling off a spool?from thesprucecrafts.com
String your beads on the elastic while it is on the spool, or use a bead stopper to avoid having the beads slip off the cord.
How to tie a knot on a bracelet?from thesprucecrafts.com
Tie your knot with some tension in the bracelet. In other words, pull the elastic so it is taut and just a little stretched when adding the second half of the knot. The extra tension from the inside helps keep the knot from untying.
How to care for elastic bracelets?from thesprucecrafts.com
Follow these tips to make them last: Always put your elastic bracelet on the right way . This is one of the main factors in bracelets that don't last. Never put on your bracelet by stretching it over your hand. As much as possible, roll it over your hand ...
What is stretch magic cord?
Things You'll Need. Stretch Magic cord is an elastic cording that is commonly used to make jewelry, such as necklaces or bracelets. Because Stretch Magic cord can be slippery, a simple knot may come undone after you string the cord with beads. One solution is to tie the Stretch Magic cord using a square knot, which will enable it to remain tied, ...
How to make a square knot for magic cording?
Pull the two ends tightly to create a square knot. A square knot will become tighter as the ends are pulled, making it an effective knot for slippery Stretch Magic cording.
