How do you clean a clock with ammoniated clock cleaner?
Clock Cleaning Solution Clock Cleaning Kit includes One pint of concentrated ammoniated clock cleaning solution that can be used to clean movements by hand, or to use with a ultrasonic cleaning machine. Just mix 1 part of this solution to 6 parts of water to clean old clock oil from the movement.
What is clock cleaning solution?
The solution effectively cleans a clock's parts of dust and residue. If you do not want to purchase a clock-cleaning solution, Michael P. Murray and Mike's Clock Clinic has developed a solution you can make at home.
What is clock cleaner made out of?
The solution is a chemical blend of 5 percent oleic acid, 4 percent ammonium hydroxide, 1 percent methocel and 1 percent pine oil that is combined with water. The solution effectively cleans a clock's parts of dust and residue.
What happens if you don’t clean an antique clock?
Failing to clean your clock can cause residue to damage components and render the clock unusable. You can either purchase a commercial clock-cleaning solution, or prepare one at home that contains similar ingredients as those found in commercial solutions, to keep your antique clock operational.
Can you use WD40 on a clock?
Just like it's not a good idea to cook with motor oil you don't want to oil your clock using the wrong oil. Using substitutes like WD40 can actually damage your clock's movement.
What do clock makers use to clean brass?
The best way to clean brass is to use either detergent cleaners without ammonia and without acids or to use organic solvents, such as acetone or tetrachloroethylene, to remove the dirt and oil residues (but not the oxide layer!)
What can I use to clean my grandfather clock movement?
Use a non-ammonia glass cleaner and a soft lint-free cloth. Spray the cleaner directly on the cloth, then wipe down the glass outside the clock. Open both the large door that covers the pendulum and the small door that covers the clock face. Wipe down the inside.
What is clock cleaner?
It consists of an ammoniacal solution (to remove the tarnish from brass) with a surfactant (to help dissolve oils and greases) and a brightening agent (to brighten the brass parts).
What is the best homemade brass cleaner?
Ketchup, tomato paste, and tomato sauce all work equally well. Apply a layer to your brass and leave it on for an hour. Then wash with warm water and dish soap. Let it dry.
Does WD 40 clean brass?
We like to use WD-40. It is not only very easy to use, but is also quick and very effective. All you need to do is coat the gold and brass lamp with a layer of WD-40, which is a great to clean brass and let it sit for about 15-30 minutes. Take a clean cloth and rub the lamp in circular motions drying and buffing it up.
Can you use sewing machine oil on clocks?
Products that you should NEVER use to oil a clock: WD-40, silicone lubricant, kerosene, graphite, sewing machine oil, motor oil, 3 in 1 oil or mineral oil. Clock oil is highly refined oil and it is engineered specifically for clock use .
What oil do you use in a grandfather clock?
0:598:55“clean and oil” grandfathers clock (with out taking everything apart ...YouTubeStart of suggested clipEnd of suggested clipThis is Liberty oil products 100% synthetic lubricant it's built specifically for clocks.MoreThis is Liberty oil products 100% synthetic lubricant it's built specifically for clocks.
How do you clean and lubricate a grandfather clock?
1:012:59OILING our 45-year-old grandfather clock (it's been running every day)YouTubeStart of suggested clipEnd of suggested clipOne of the worst things that you could spray on a clock would be wd-40. It's a degreaser. It's not aMoreOne of the worst things that you could spray on a clock would be wd-40. It's a degreaser. It's not a lubricant. And it really won't come out of the clock.
What is clock cleaning solution made of?
Commercial Clock Cleaning Solution The solution is a chemical blend of 5 percent oleic acid, 4 percent ammonium hydroxide, 1 percent methocel and 1 percent pine oil that is combined with water. The solution effectively cleans a clock's parts of dust and residue.
How do you clean a wooden clock case?
Simply rubbing the case with a soft cotton cloth will remove dust and surface dirt. For polishing, apply a wood finishing wax of your choice with a cotton cloth or soft-bristle brush. Avoid silicone-based spray polishes; these leave an intense shine but clog the pores and grain in the process.
How does a sonic cleaner work?
Ultrasonic cleaning works through high-frequency sound waves transmitted through liquid to scrub clean the surface of immersed parts. The high-frequency sound waves, typically 40 kHz, agitate the liquid solution of water or solvent, and cause the cavitation of solution molecules.
How do you clean old brass clocks?
0:111:26How to Clean Antique Clocks - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou will need a washing tray cleaning fluid watchmakers tools a soft bristle brush hegwood a lint-MoreYou will need a washing tray cleaning fluid watchmakers tools a soft bristle brush hegwood a lint-free rag pith.
How do I clean my brass anniversary clock?
Many clocks are made with components of brass which can be delicate and should only be cleaned with a soft cotton-based cloth. Using any abrasive cleaners or sprays will cause damage to the clock, so avoid these at all times.
How do you clean a brass pendulum?
Dampen a soft cloth and gently rub the brass to help loosen the tarnish, rinse well in warm water, and buff the finish with a clean, dry microfiber cloth.
How do you clean a bronze clock?
In a small dish, combine equal parts flour and salt. Add white vinegar to the flour/salt mixture, using a few drops at a time until a soft paste forms (should be the consistency of toothpaste). Apply the paste to your bronze item using your hands (with the rubber gloves) or with a small polishing cloth.
What is the solution for cleaning a clock?
The solution is a chemical blend of 5 percent oleic acid, 4 percent ammonium hydroxide, 1 percent methocel and 1 percent pine oil that is combined with water. The solution effectively cleans a clock's parts of dust and residue.
How to clean a clock?
Combine equal parts of solution and water when you clean your clock. Always wear rubber gloves when working with the solution. Prepare the solution and clean your clock in a well-ventilated area to limit your intake of toxic fumes produced by the chemicals in the solution. Advertisement.
How to clean a clock with oleic acid?
Locate a plastic container that can hold at least a gallon of clock-cleaning solution and has a secure lid. Remove the lid and pour a half of a gallon of purified water into the container. Mix 4 ounces of commercial acetone and 4 ounces of oleic acid with the water until the chemicals are thoroughly combined. Acetone acts as an emulsifier and helps ensure the ingredients combine. Incorporate 4 ounces of liquid soap--either dish or clothing detergent--to the solution and blend. Add 8 ounces of ammonia with a 27 percent concentration level and mix again until all ingredients have been completely integrated. Combine equal parts of solution and water when you clean your clock. Always wear rubber gloves when working with the solution. Prepare the solution and clean your clock in a well-ventilated area to limit your intake of toxic fumes produced by the chemicals in the solution.
How to clean clocks with acetone?
Locate a plastic container that can hold at least a gallon of clock-cleaning solution and has a secure lid. Remove the lid and pour a half of a gallon of purified water into the container. Mix 4 ounces of commercial acetone and 4 ounces of oleic acid with the water until the chemicals are thoroughly combined.
What is a clock oil solvent?
It is a potent oil and grease solvent that effectively eliminates oil and grease build up on clock parts. You can usually buy it from a chemical supplier or clock company.
Can you clean an antique clock?
You must use a specially formulated clock-cleaning solution to clean an antique clock. The cleaning process is tedious, since it requires that you clean each individual clock part separately. Failing to clean your clock can cause residue to damage components and render the clock unusable.
How to clean a clock with water?
Once mixed, use this effective cleaner to keep your clocks running beautifully. Fill a bucket of water with 1/2 gallon of purified water. Work outdoors or in an area with plenty of ventilation.
How to make oleic acid?
oleic acid, which you can purchase from a chemical supply house. Add 118ml. mild dish soap to the solution and mix well. Pour the ammonia in slowly, mixing while pouring, until all 236ml. is mixed into the solution. Transfer the solution to a plastic container with a lid and store in a cool, dry place.
What to wear when handling ammonia?
Use extreme caution when handling oleic acid and ammonia. Wear rubber gloves and protective goggles at all times .
Can you mix your own ultrasonic cleaner?
If you are dedicated to horology, or the art and science of timekeeping, keeping your clocks clean is an important part of the job. Although there are many cleaning solutions on the market for cleaning both older and newer clocks, it is possible to mix your own cleaner at home to use in your ultrasonic cleaner.
How to clean a clock with ammonia?
Clock Cleaning Kit includes One pint of concentrated ammoniated clock cleaning solution that can be used to clean movements by hand , or to use with a ultrasonic cleaning machine. Just mix 1 part of this solution to 6 parts of water to clean old clock oil from the movement. The E-book that is included with this kit has instructions on how to clean the clock movement in the best and safest way, so refer to it before starting the cleaning process.
What is the purpose of cleaning a clock?
The goal to cleaning a clock movement is to remove old oil that has solidified and put new oil in its place. Solidified clock oil creates wear to the movements outer plates and eventually causes to much friction for the clock to run.
What happens if you take a spring driven clock apart?
If someone were to take a spring driven clock apart without letting down the mainsprings, bad things may happen. The movement would get ruined and you can get your hands hurt. To get this tool added, you must select "spring driven kit" below.
Why do you need a level on a clock?
The level is needed to be sure the clock stays in beat from one place to another. Learn to set the clock in beat by the directions in the E-book, making sure the clock is level when it is being done. Then keep a level with the clock and where ever the clock goes, as long as its level, it will be in beat.
What is a key in a spring driven clock?
Used to release the power in a wound up mainspring. Key goes into the chuck and the chuck goes into the handle so you can let down the power of the spring. It does the same job as the let down with all the chucks. If someone were to take a spring driven clock apart without letting down the mainsprings, bad things may happen. The movement would get ruined and you can get your hands hurt. To get this tool added, you must select "spring driven kit" below.
Why do you need to pull the hour hand off a 400 day clock?
Doing it by hand could increase the hour hand holes diameter and the hand will not fit back on correctly because it would be touching the dial.
Can you clean a clock without disassembly?
Our Clock cleaning Kit offers the basic items required to clean a clock movement without disassembly. Cleaning without dis assembly is not as effective as breaking down the movement, but it is sufficient in most situations. Not everyone is ready to break down their clock movement and put it back together.
How do you clean a clock?
The premise behind them is much alike no matter what type you choose from. A mantle clock, a grandfather clock, a cuckoo clock, all have a similar mechanism within that operate in much the same way. In order to keep your clock in its best working condition, you must not only keep it wound but also clean it regularly so that the internal mechanisms do not clog up with dust and other debris. It can also be a good way to ensure that all of the parts within your clock are in good working order and do not need replacing. Here we will discuss the best ways to keep your mechanical clock in the best shape possible.
How to clean antique clocks?
Take note of all the nooks and crannies in the pieces and clean them with sharpened pegwood. You can clean the pinion leaves with the soft brush and a rag while the teeth of the wheels can be wiped down with pith.
How to keep a clock in good working order?
In order to keep your clock in its best working condition, you must not only keep it wound but also clean it regularly so that the internal mechanisms do not clog up with dust and other debris. It can also be a good way to ensure that all of the parts within your clock are in good working order and do not need replacing.
How to get grease off plastic?
Try getting grease off plastic with any water based cleaner that is cold.
How many gallons of ammonia in an ultrasonic cleaner?
Since my ultrasonic cleaner holds about 3 gallons, here are the proportions: 3 gallons of ammonia, 1 pint of PineSol cleaner, and either 1 or 1/2 pint of Murphy's Oil Soap.. I do not use a PineSol type cleaner as found in the dollar stores, but the original PineSol.
What happens when you mix chemicals?
When you mix chemicals, there is always some reaction. Sometimes there is an exchange of elements and some chemicals resist "mingling". The residue may be a byproduct or a particular something that won't mix in. If there is no telling damage and it rinses off, it's probably not of major concern. It might even be a "coating" from the parts, like lacquer or something.
Can I use blueprint ammonia for clock movements?
And, it really is some wicked stuff. I mix it 7 parts water one part ammonia, along with a large bottle of Murphy's Oil Soap for a 2 gallon tank. Actually 2 gal and one QT. And yes, the clock movements must be completely submerged.
