How to get river stones out of a fire grate?
How to sand a fire bowl?
How to get concrete to cure smoothly?
How to make a fire bowl stronger?
How to make a concrete form?
How to make pancake batter?
Can you stain concrete?
See 4 more
About this website
How To Make A Concrete Fire Bowl - DIY Creators
5. Light Your Fire Bowl Up. For the Fire, I found this Gel Fuel on Amazon. It has about 6 hours of burning time. To kill the fire, I usually just smother it. I don’t have one, but you can also get a flame snuffer to put out the fire.; The process
Concrete Bowl - Quick DIY [1/2] - YouTube
This Video shows how to make a concrete bowl. All Tools and materials are listed in here. Thank you for watching :)***Please click here to subscribe: http://...
How do I make a concrete form?
I used the same large bowl, but it scratched from the shovel transferring to the form. 2. Add concrete mix into a bowl and add water. Be sure to mix the to concrete well. Do not overwater it. 3. Next, you can oil your large bowl to provide an easier release.
What kind of mesh do I use to support marbles?
To support the rocks, or in my case the marbles, I used some construction wire mesh.
How long does a smothered sandbox last?
This one lasts about six hours of burning time. I usually just smother it to kill the fire for reuse.
How to clean a rough top edge?
The top edge was a bit rough. To clean, sand it down using sandpaper.
1. Mixing the Concrete and Making the Form
Note: I would recommend using a separate mixing container. I used the same large bowl, but the scratches from the shovel transferred to the concrete fire bowl form. Add concrete mix into a bowl and add water. Be sure to mix the concrete well, per package instructions.
2. Removing the Fire Bowl Form
After three days of sitting, remove the concrete from the bowl. I was blown away by how well this came out. It was like glass, the bowl had a sheen on it and that transferred to the concrete. If a bowl with a flat coat was used instead, it would still look good but not shiny.
3. Sanding The Concrete Fire Bowl Lip
The top edge was a bit rough. To clean it up, I sanded it down using sandpaper. Starting off with 80 grit sandpaper to knock it down some. Then switched to 120 grit and 220 grit to smooth it. The higher in grit, the smoother it will be.
4. Making The Rock Support
I used some construction wire mesh to support the marbles. You can get creative here if you don’t want to handle the wire mesh. Some alternative options include chicken wire or a barbecue grill grate.
5. Light Your Fire Bowl Up
For the Fire, I found this Gel Fuel on Amazon. It has about 6 hours of burning time. To kill the fire, I usually just smother it. I don’t have one, but you can also get a flame snuffer to put out the fire.
How thick is a fire bowl?
Test out the bowls before you buy to make sure there’s enough room between the bowl for the thickness of your fire bowl. Ours is about an inch thick. When choosing the bowls, also consider the depth of your fire bowl. Spray the inside of the larger bowl with cooking spray. Spray the outside of the smaller bowl with cooking spray.
Can you add more water to concrete?
You can always add more water and more concrete as you need it. You want the mixture to resemble thick pancake batter. Once you have the consistency that you want, pour the mixture into the larger bowl. Push the smaller bowl down into the mixture and weight it down. We used paint cans.
How to get river stones out of a fire grate?
Make sure the stones are larger than the spaces in the grate. Safety Note: To access gel cans, simply pull up the grate, remove the cans, and take the lids off. Place back in the fire bowl along with the grate and stones.
How to sand a fire bowl?
Using a 220-grit sanding block, give the fire bowl a light sanding to remove any rough areas. Don’t over sand as this can damage the overall finish of the bowl.
How to get concrete to cure smoothly?
To ensure the concrete cures smoothly, release the air bubbles. First, lightly tap the outside of the larger bowl with a mallet, working your way around the bowl ( Image 1). Then, using an orbital sander on low, gently vibrate the outside of the larger bowl, spinning the bowl slowly as you go (Image 2).
How to make a fire bowl stronger?
Place the form in a dry area, and allow to cure until fully set. The longer you allow the fire bowl to cure, the stronger it will be. This is important, as it will likely be exposed to extreme shifts in temperature. Allow Concrete to Cure.
How to make a concrete form?
Pour Concrete Into Form. With your concrete at the right consistency, quickly and carefully pour the mix until you fill the large bowl about halfway. Then, press the smaller bowl into the mixture in the center. Use light pressure , and push until the concrete mix raises to the desired height (Image 1). Add weights to keep the small bowl in place ...
How to make pancake batter?
Mix Concrete. Prep your area with scrap board or tarps, as mixing concrete can be messy . Wearing gloves , a dust mask and goggles, pour concrete mix and water into a bucket, and mix until you get a pancake batter consistency (Images 1 and 2).
Can you stain concrete?
Learn how to stain concrete and give your cement surface a permanent color that won't fade, dull, crack or peel.
