- Start a drawing or open an existing drawing file.
- Start the relative view command: Insert>Drawing View>Relative to Model Use the Command Search Bar for “Relative View”.
- Select the model you wish to create the view of: Select a drawing view containing the part or assembly. Right-click and select “Insert From File…”.*
- Once directed to the part/assembly file you will select faces or planes to define the orientation of the model**
- Place the Relative View on your sheet.
What are the types of views in SolidWorks?
View Types
- View Toolbar
- Wireframe Displays all the edges of the model.
- Hidden Lines Visible Displays the model with all edges that are not visible from the current view angle in gray.
- Hidden Lines Removed Displays the model with all edges that are not visible from the current view angle removed.
- Shaded Displays a shaded view of the model.
How to fix empty SolidWorks drawing views?
Resolving the empty view Issue. Close the drawing (no need to save) Select File > Open > select the drawing, but do not open yet > References > double-click the model > browse to the model’s new location. Double-click the model to browse to it’s new location. The new folder path appears in green in the dialog box, to confirm the change ...
How do you make drawing in SolidWorks?
To create a new drawing:
- Click New (Standard toolbar) or File > New.
- In the New SOLIDWORKS Document dialog box, select Drawing , then click OK.
- Select options for Sheet Format/Size, then click OK.
- In the Model View PropertyManager, select a model from Open documents or browse to a part or assembly file.
What are the standard drawing views?
Standard views are those typically used in engineering drawings and are one of two view types used as foundations for supporting views – the other is the General view. A drawing must contain a standard or general view before supporting detail, custom detail, section, aligned section, broken-out section, crop, or auxiliary views can be created.
How do I change the drawing view in SolidWorks?
Replacing Model in a Drawing View You can change file references between parts and parts, assemblies and assemblies, and between parts and assemblies. (Drawing toolbar) or Tools > Replace Model. In the PropertyManager, under Selected Views, select a drawing view.
What are the different drawing views in SolidWorks?
View TypesView Toolbar.Wireframe. Displays all the edges of the model.Hidden Lines Visible. Displays the model with all edges that are not visible from the current view angle in gray.Hidden Lines Removed. ... Shaded. ... Shaded With Edges. ... Shadows. ... Section Views in Models.More items...
What is a base view?
a radiographic projection showing the base of the skull, positions of the mandibular condyles, and zygomatic arches. Synonym(s): base view, submental vertex radiograph.
How do I lock a drawing view in Solidworks?
Lock View Position allows you to fix the drawing view in place. Right-click anywhere in the drawing view and select Lock View Position.
What are different views in engineering drawing?
The most common way to communicate all the information is by using three different views in a multiview drawing: Front view. Top view. Side view.
What are standard 3d views in Solidworks?
The Standard 3 View option under Insert > Drawing View creates three related default orthographic (front, right, left, top, bottom, and back) views of a part or assembly displayed at the same time. The view orientations used are based on the orientations (Front, Right, and Top) in the part or assembly.
What is a sectional view?
A sectional view represents the part of an object remaining after a portion is assumed to have been cut and removed. The exposed cut surface is then indicated by section lines. Hidden features behind the cutting plane are omitted, unless required for dimensioning or for definition of the part.
What is side view solidworks?
The alignment of the top and side views is fixed in relation to the front view. The top view can be moved vertically, and the side view can be moved horizontally. The top and side views are linked to the front view. Right-click a top or side view and select Jump to Parent View.
How to create a section view?
You create a section view in a drawing by cutting the parent view with a cutting, or section line. The section view can be a straight cut section or an offset section defined by a stepped section line. The section line can also include concentric arcs.
Can you create section views in models?
You can also create section views in models to populate the View Palette.
Rotate View
In the tool palette shown below, there is a Rotate View Tool highlighted in yellow.
Create a View
To create a view of the model as it currently shows in 3D space, you must do the following:
More SOLIDWORKS Drawing Tutorials
GoEngineer delivers software, technology and expertise that enable companies to unlock design innovation and deliver better products faster.
Which views are aligned with the parent views?
Auxiliary, Section, and Aligned Section views are aligned with the parent views from which they are created, and only move in the direction of the projection.
What is standard 3 view?
Standard 3 View. The alignment of the front view is fixed in relation to the other two views. When you move the front view, the other views also move. The other two views can move independently, but only horizontally or vertically, toward or away from the front view.
Can you change alignment in Views?
You can change the alignment of views that are not aligned by default, or views whose alignment you have broken. You can also break view alignments and return alignments to their defaults.
Can you specify document level drafting settings for all dimensions?
You can specify document-level drafting settings for all dimensions. Available for all document types.
Can you create standard dimensions in drawings?
However, the values of reference dimensions change when the model dimensions change. Standard Dimensions. You can create standard dimensions in drawings, such as dimensions created in a sketch. This includes Smart, Horizontal, and Vertical dimensions. Rapid Dimension.
Can you drag a dimension from one place to another?
When you drag a dimension from one place to another, the dimension reattaches to the model, as appropriate. You can only move or copy dimensions to a view where the orientation is appropriate for that dimension. You can change a dimension in a part, sketch, assembly, or drawing in the Modify dialog box.
