Fabric Watch-strap Cover
- Step 1: Materials / Equipment. I have always used washable cotton fabric so far, but you could use anything so long as...
- Step 2: Making a Template. Take a piece of paper and lay your watch on it, parallel to and touching the edge. Lay your...
- Step 3: Template Part 2. When the strap cover is complete, there will be two "tunnels" of fabric into...
How do you make a watchstrap step by step?
Take a piece of paper and lay your watch on it, parallel to and touching the edge. Lay your ruler against the side of the face and draw a line parallel with the edge. Mark the length of the watchstrap, minus any overlap where it fastens.
How do you sew a watch band?
To begin, I sewed the retainer piece of material to the band piece. It is secured on both ends so that you have a closed loop to which you will attach the watch with the spring bars. For the band itself, I folded the material over 1/4 inch on one edge. I folded the other edge over 1/4 inch as well.
How do you put a strap cover on a watch?
Lay the strap cover down with your watch still in it. Centre the strap in the cover and adjust the watch's position until it is sitting as you want it when the cover is finished. Carefully tack the tunnels down on either side of the watchstrap.
How do you cut out fabric to make a strap?
You will want to cut your fabric the same length as you want your final strap but when deciding on a final length don’t forget about your seam allowance. Multiply your final width by 4. So I cut out my fabric 32 x 4. I suggest to always use interfacing in your straps because it will make them more substantial. I also suggest a fusible interfacing.
How do you make a homemade watch strap?
Leather Watch StrapStep 1: Tools. These are the tools you'll need to make this strap. ... Step 2: Initial Strap Cut. Cut two straps of leather both of which are the same dimensions. ... Step 3: Thinning. ... Step 4: Cutting the End. ... Step 5: Stitching Holes. ... Step 6: Inside the Strap. ... Step 7: Repeat Last Step. ... Step 8: Buckle Hole.More items...
How do you make a canvas strap?
1:377:04Easy way to make a bag strap using webbing and waterproof canva.YouTubeStart of suggested clipEnd of suggested clipHowever the length is that you need in this case is 42 inches by two and three quarters of an inchMoreHowever the length is that you need in this case is 42 inches by two and three quarters of an inch so the width is two and three quarters of an inch whatever the length that you need for your strap.
What is the best strap material for watch?
In terms of metal straps, the most commonly utilised material is stainless steel. A stainless-steel strap is strong, durable, and resistant to corrosion. The one downside to stainless steel is that it is easily scratched. Stainless-steel straps can be solid or plated.
How do you make a ribbon watch band?
1:544:14Ribbon Watch - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is fast and simple okay we're gonna cut it off cute little angle. Okay there's your cue watchMoreThis is fast and simple okay we're gonna cut it off cute little angle. Okay there's your cue watch show the camera that fabulous watch what do you think.
How do you make a padded strap?
1:3516:10Make a Carrying Strap Pad - YouTubeYouTubeStart of suggested clipEnd of suggested clipPad. The shorter strip will be bound on each short. End then it will be centered on top of the twoMorePad. The shorter strip will be bound on each short. End then it will be centered on top of the two long strips and sewn in place creating a channel through which the carrying strap will be passed.
How do you make a paracord watch strap?
6:318:18It's TIME We Make A Woven Paracord Watch Strap! | 6 Strand Flat Braid ...YouTubeStart of suggested clipEnd of suggested clipIf you find this method too finicky you can always just glue the two pieces. Together. Because myMoreIf you find this method too finicky you can always just glue the two pieces. Together. Because my watch trap is on the shorter side I only need one keeper. But you can do a second one if you need. It.
What material is used for watch straps?
Watch straps may be made of leather, plastic, rubber, cloth, or metal, sometimes in combination. It can be regarded as a fashion item, serving both a utilitarian and decorative function. Some metal watch straps may be plated with, or even in rare cases made of, precious metals.
What is Zulu strap?
ZULU straps are often confused with NATO straps. ZULU strap have only 1 long strap, made of thicker nylon cloth, and has beefy rounded buckles. NATO straps have an additional strap that slides through 2 lugs, in order to have 2 straps of nylon under the watch, instead of one. Fjordson straps are NATO. (Source).
Which is the most comfortable watch strap?
Stainless Steel Mesh Bands The main comfort point here is that, unlike regular stainless steel straps that feature gaps in every single link, mesh bands are tightly woven together. This design prevents the uncomfortable catching and yanking of arm hair when slid across your wrist.
How do you make an elastic watch strap?
1:456:14DIY APPLE WATCH Elastic Watch Band - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then fold it under again we're just going to top stitch along the edge of the elastic. There.MoreAnd then fold it under again we're just going to top stitch along the edge of the elastic. There. And i like to top stitch from the underside. Make sure i'm catching the elastic.
How do you make a Velcro watch band?
DIY Velcro Watch StrapStep 1: Materials/ Tools Needed. Velcro. ... Cut Velcro to size. Measure "Loop" layer to go all the way around your wrist and cut. ... Step 3: Assembly. Feed the "Hook" layer through the watch like pictured and stick the other layer on top.Step 4: Wear It With Pride.
What watch band material is best for sensitive skin?
Leather is a natural material making very light and feel soft on the skin to prevent skin irritation through friction during intensive workouts.
Is silicone a good watch band?
Elite Silicone watch bands are extremely soft and flexible. I have several and regularly wear them on my watches. They are among the most comfortable straps that I own. The underside is smooth and contours nicely to the wrist.
Are rubber straps good?
It is far stronger than leather. And, more importantly, it is far more durable. This means that rubber bands are ideal for athletic endeavors. Take your band to the beach, the pool, or rough it up on the basketball court.
How do I choose a watch strap?
To find the correct strap or band for your watch, you will need to know various lengths and sizes. In order for your watch band to sit correctly, you need to buy one that's the right length for you. To do that, make sure you measure the length of the last watch band that fitted you.
How to make a watch strap?
Now it's time to start putting your watch-strap together.#N#Lay one of your main strap pieces right side up. Then position the two tunnel pieces, wrong side up, aligned with one edge. Your template may help you see where to place them along the edge, as in the picture. Match up the pattern if you are doing that .#N#Remove the template (without disturbing the pieces) and place the other main strap piece, wrong side up, on top of the first. Again, match the patterns if appropriate. Pin the pieces together, and then tack them together with a contrasting colour of thread. You can skip the tacking, but it will produce better results, particularly if you are using a sewing machine for the next bit.
What is a watch strap cover?
Fabric Watch-strap Cover. This removable cover can be made to fit any watch, but is particularly suitable for watches with fixed metal straps. It's both pretty and practical, particularly if your skin is sensitive to metal. I've always found that the metal strap on my watch is slightly too big and twiddles around on my wrist.
Do stripes match up?
Stripes look very good, but are tricky to match up neatly (ask me how I know!) There's no reason not to use scraps of luxury fabrics if you want to, but you might want to use cotton for the part next to your wrist, since it won't be seen and needs to be soft and breathable. Ask Question.
Should I iron cotton before sewing?
It is a good idea to iron it before you start. I've always used cotton for this project, because it's easy to work with and can be washed if it gets dirty. As always with sewing projects, wash your fabric beforehand if you're worried that it might shrink in future.
Do you need to leave a little more slack on a watch strap?
If there is a buckle on the strap , you will need to leave a little more slack so that the buckle can pass through. A clasp such as you get on metal watch straps will probably not take up much more room than the strap itself, but it's worth testing. Once all the tunnel sides are tacked, take the watch out of the cover.
How wide should lace straps be?
You could use 12mm / 1/2″ wide depending how wide you want your straps to be. The clear elastic helps if your lace is slightly see through, but if you’re using a knit material you could also use a lightweight woven elastic. With the right sides of fabric together, fold your straps in half lengthwise. Overlock / serge the straps together, placing ...
Can you make your own shoulder straps for Bella Bralette?
Here’s a quick tutorial on how to make your own fabric shoulder straps for the Bella bralette and cami pattern. If you can’t find shoulder strapping in a matching colour or you want to use your cami or lining fabric, this is an easy way to make professional looking straps.
How to make a strap with paper?
Trace 2 rounded rectangles that are 1½ by 4 in (3.8 by 10.2 cm). Use a piece of paper or cardstock to sketch out a rough template for the end pieces of your strap. Draw out a curved rectangle with rounded edges and long lines. As you sketch, check with the ruler to make sure that the template is 4 in (10.2 cm) across and 1½ in (3.8 cm) wide. Once you’ve completed this template, cut it out with a pair of scissors.
How to secure a strap?
Secure 1 end of your strap inside the folded end piece. Place your folded end piece and metal clasp onto a flat workspace. Use 1 hand to hold the material in place, and another to tuck 1 end of the fabric strap between the folded rectangle. As you tuck, try sandwiching the end of your strap between both folds of the end piece.
How to iron a fleece strap?
Iron the fusible fleece so it adheres to the strap. Set your iron to a wool fabric or steam setting, then press the appliance on top of the fleece. Work the iron in sections, holding it in place for 10 seconds so the fleece can fuse with the fabric. Continue moving the iron down the fabric strip until the fleece is fully attached.
How to turn a strap inside out?
Pinch and roll your fabric to turn it inside out. Begin tucking and rolling your stitched strap so the hem is no longer visible. Continue pinching and pulling the material until the seam is no longer visible, and the fabric looks smooth.
How to attach a camera strap to a camera?
Clip both ends of the strap to your camera. Take the clasps attached to both ends of your strap and fasten them to the strap loops on your camera. Depending on the size of your metal hooks or clasps, you might not be able to fit your large hook around the loop. If this is the case, slide a metal ring onto each of these camera loops, and attach the metal hooks to these loops.
What side of the fleece is flush with the fabric?
Make sure that the flat edge of the fusible fleece is facing up, and the softer side is flush with the fabric.
What does a different type of fabric do?
A different type of fabric adds a nice contrast to the fabric you used for the strap.
