how do you make a hanging bead curtain

1. Measure how long you want your curtains to be. Note this measurement. ...
2. Start cutting out strings at the length you need them to be at. ...
3. Tie the fishing line on the rings. ...
4. Start beading! ...
5. Push a two-hole bead at the end of your curtain, joining the two strands together. ...
6. To make sure the beads stay in place, add a drop of superglue at the bottom. ...

Full Answer

What string do you use for beaded curtains?

A strong beading wire like Accu-Flex beading wire is a great choice for a beaded curtain. This type of stringing material can handle a great deal of use and will hold up well to the weight of the beads. Be sure to use several crimp beads at each end of each strand for extra security.

How do you hang bead curtains?

1:323:15How To Hang a Beaded Curtain - ShopWildThings Video ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's two little eyelet hooks on each side of the beaded curtain we've already mounted some screwsMoreThere's two little eyelet hooks on each side of the beaded curtain we've already mounted some screws these are just regular screws. They're small you don't need to put a big hole in your wall.

What do I need to make bead curtains?

Things You'll Need Crystal, glass, polymer, clay, wooden or plastic beads can make beautiful DIY beaded curtain designs. You can make your bead curtain thick and full enough to cover an entrance to a room, or create something more ethereal with a few simple strands to catch the light in a window.

How do you make beaded curtains for windows?

1:366:13Bead Curtain Sun Catcher // Day 4 Bead Soup Challenge - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou need your tools flat pliers and cutters you need some crimps if you're using the beading cord ifMoreYou need your tools flat pliers and cutters you need some crimps if you're using the beading cord if not you can just twist the wire in place you're going to need a suction cup if you want to hang.

How do you hang beaded curtains without drilling?

How to Hang Curtains Without Drilling: 3 MethodsSecure the hardware with adhesive hooks. Adhesive hooks or adhesive strips are versatile hanging tools you can purchase in various sizes and strengths. ... Use magnetic curtain rods. ... Use tension rod curtains inside window frames.

How do you fit a beaded door curtain?

Just screw the hooks into the door frame and slip your curtain over the hooks. You are done! To hang your curtains against the wall or to attach flat to the doorframe you just need to regular old nails! Put the nails in the wall, slip the hooks on the curtain rod over them, and you are done!

What beading wire should I use?

Tips for Selecting Beading Wire by DesignSmall, lightweight beads, such as sterling silver beads and Bali beads, work well with . 010-0.15-inch wire.Light to medium crystal and stone beads work well with medium diameter 0.15-0.21-inch wire.Heavy beads are best with heavier 0.24-0.36-inch wire.

How do you make string curtains at home?

1:023:16DIY fly curtain with Zpagetti yarn - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou start by finding the middle of your yarn. You then make a loop pull the top of the links throughMoreYou start by finding the middle of your yarn. You then make a loop pull the top of the links through the loop slip it around your baton. And pull tight.

How do you make macrame curtains?

0:075:52DIY Macrame Curtain - YouTubeYouTubeStart of suggested clipEnd of suggested clipBelow a wooden dowel the width of your window. And then to ceiling hooks. And some rope to hang it IMoreBelow a wooden dowel the width of your window. And then to ceiling hooks. And some rope to hang it I really wanted to lighten up my office because I have a bunch of green plants down below.

How do you make beaded window valances?

0:452:18Making Beaded Window Valances : Beading Curtain Tiebacks - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo first you want to start by putting a crimp bead on your strand. And slide that all the way downMoreSo first you want to start by putting a crimp bead on your strand. And slide that all the way down to the position where you want to put it now if you use your needle nose plier to sort of grasp.

How do you make a fly curtain?

0:241:55Fly curtain DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipGet a piece of 10 minutes at least 10 centimeters wider than your door frame. On the back you'reMoreGet a piece of 10 minutes at least 10 centimeters wider than your door frame. On the back you're going to line up the pieces off the tablecloth. And staple them in. Place.

How do you make paper beads?

8:1010:49How to Make Paper Beads - YouTubeYouTubeStart of suggested clipEnd of suggested clipPaper right along my skewer. Again pushing down as i roll. So that way i get it nice and tight. YouMorePaper right along my skewer. Again pushing down as i roll. So that way i get it nice and tight. You can also pick it up and kind of roll it in your.

Where do you put beaded curtains?

A lot of our customers will hang them in a window and then flank either side of that window with standard fabric curtains. Beaded curtains are generally about 3 feet wide and 6 feet long. If your window or opening is more than 3 feet wide, simply hang two (or more, if needed) curtains right next to each other.

What are beaded curtains for?

You can hang your bamboo door beads curtain over a door panel to disguise the clutter or you can use them as window curtain, closet curtain, room divider or wall decoration. Hang it over an existing door, without removing the door or cover and beautify a doorway, gateway, or use it as wall art, it will look fabulous.

How do you hang a curtain on a door?

Insert a sash rod through the top pocket of your curtains. Hold the rod up to the door and extend or shorten it as needed by pulling or pushing on one end. The holes on the end of the sash rod should line up with the prong on the sash bracket. Slide the rod over the prong and clip it into position.

How to tie a curtain with beads?

Push a two-hole bead at the end of your curtain, joining the two strands together. Tie three small knots at the bottom, then push the remainder of the string back up through the holes of the first couple of beads. Then, trim the extra string.

How many beads do you need to make a beaded curtain?

You have to remember that a single beaded bracelet will take at least two dozen beads in most cases.

Why do people make their own beaded curtains?

Most people who make their own beaded curtains do so because they want to have the experience of spending a day beading your curtains. It’s fun to be able to hold something in your own hands that you’ve made on your own. And, if you want to make something that’s totally unique, this is a good way to do it.

What kind of beads should I use for sheer curtains?

If you want to have the beaded curtain version of sheer or semi-sheer curtains, go for glass beads or reflective crystals. These are great for having the sunlight turn your windows into a giant prism.

What is beaded curtains?

Beaded curtains are one of those projects that are great to do if you want to spend a day with arts and crafts goodies. However, you will need a lot of supplies and time. You will need:

How to make beads stay in place?

To make sure the beads stay in place, add a drop of superglue at the bottom. It helps, but is not necessary.

How many strings should I cut for curtains?

Start cutting out strings at the length you need them to be at. I suggest doing this in batches of six to 10, simply because it’s easier to gauge how thick your curtains will be.

What is a beaded curtain?

A wooden beaded curtain. Image Credit: Final beaded curtain. For most people, beaded curtains are nothing more than cheap-o plastic beads factory-strung in a boring and regular pattern to provide a door where there isn't one. It doesn't have to be that way. The quality of your curtain can be vastly improved by using beads ...

How to make a bead spacing guide?

Image Credit: Step 1. Make a 1/4 inch long mark on the mid-point of your wood at every inch. You may end up spacing your beads differently, but it's good to have marks there so when you have your strands tied to the marks and want to adjust, they can act as a spacing guide. Advertisement.

How to make a fishing wire strand?

Image Credit: Step 2. Cut one strand of fishing wire a foot longer than what your first finished strand will be. String on one bead at one end. This will be the last bead of your first strand. Make multiple loops through the hole of the bead and tie a knot to secure it. Advertisement.

How far apart are the 13 strands of wood?

The final width for this project was 16 inches wide so the 13 strands were all a little over an inch apart.

How to hang a fishing rod on a window?

Take two 8-inch pieces of fishing line and tie loops with them. Add one loop on each end of the wooden rod on either side of the curtain and hang from nails (or eyelets) in your window frame.

Do you need beads for a curtain?

You will need a lot of beads for this project, but keep in mind, the bigger the beads and longer the strands, the heavier the curtain will be. Take apart jewelry you are not wearing for some fun nostalgic pops, find strands of beads at thrift stores, or look through your grandmother's jewelry chest.

How to make a bead curtain?

Cut a length of fishing or monofilament line 7 inches longer than the length of one strand of your bead curtain. Make a loop and tie a strong knot 3 inches from one end of your line. This is the top of your bead strand and will slide over the curtain rod.

How to make a pattern for beads?

Design a pattern for your strands by laying out the beads as you would place them on the strand. Pattern designs are generally repetitive, so you need to only lay out the first section of your pattern, up until the repeat begins. For example, your pattern may be six 6-millimeter red bicones, followed by 12 8-millimeter crystal bicones, followed by one 10-millimeter round hand-painted bead repeated seven times to create your strand. Lay out the red, crystal and hand-painted beads to visualize how the beads look together and to tweak your design, if needed. Once you have your pattern as you like it, write down the sequence to make stringing easier.

How to make a doorway with beads?

Thread the beads onto the line according to your design plan, leaving about 3 inches at the bottom to tie a strong knot. Make as many strands as you need to fill your doorway or window.

How to make a curtain with beads?

Create a scaled drawing on a piece of graph paper based on your measurements, using one row per strand of beads. Outline the colors and bead arrangement on this with pencils and a marker. Number each row for easy reference. If you’re going for a more haphazard effect or using only a handful of colors, a diagram may not be necessary. The size of your beads affects your curtain design. Bigger beads will mean you'll need less of them than very small beads.

How to make beaded curtains for doorways?

To make beaded curtains for doorways, you will first need to measure the inside width and length of the doorway to determine how big your curtain design needs to be. Cut a dowel rod to this width plus four inches. Measure in from each side two inches and mark this with a pencil. In between these two points, mark the location of each eyelet hook with a pencil and a ruler. Count the marks to determine how many rows of beads you’ll need.

How to string beads on nylon?

String the beads onto the nylon per your diagram or in a pattern of your choosing. Some may prefer to work one string at a time, while others will get better results working from left to right. One way to finish the string for extra security is to string a few crimping beads right below the knot. According to Beadaholique, a crimping bead is a soft metal bead that is squeezed shut to hold other beads on instead of a knot. Clamp with pliers to secure.

How to finish a string?

One way to finish the string for extra security is to string a few crimping beads right below the knot. According to Beadaholique, a crimping bead is a soft metal bead that is squeezed shut to hold other beads on instead of a knot. Clamp with pliers to secure.

How to work on IY string curtains?

Work on your IY string curtains will progress more quickly if you separate your beads by color if you are using more than one color, or by size. Position the dowel rod on a large work surface. Place your diagram in an easy-to-see spot if necessary.

What do you use to make a kitchy design?

Opt for a kitschy design made with high-end beads to add a bit of personality to your otherwise neutral space or a game room, or create an upscale piece using quality wooden and ceramic beads instead of plastic, often used on store-bought versions.

How to get rid of excess string on beads?

Tie off the end of each string securely and then push the excess string back through the beads, cutting away any excess.

Step 2: Make the Central Owl Pendant Bunch

2nd, attach the owl pendant to 1/3 location of cord by using a Lark’s Head Knot;

Step 3: Make the Rest Beads Bunches in Varying Lengths

2nd, string one purple and one black on two ends of cord. Secure by tying two Overhand Knots;

Step 4

4th, in the following work, you’ll just need to repeat tying Overhand Knots to stop right beads in proper place. In my beads curtain design, I made five couples of beaded bunches extra and the lengths of needed cords are: 68cm, 76cm, 84cm, 92cm and 100cm.

Step 6

2nd, divide both sides into 5 equal parts and then attach the rest bunches by using double faceted adhesive tape;

How to store beaded curtains?

Before taking your Beaded Curtains down, tie the strands together before taking them down. Grab all of the strands about 2 feet from the top hanging rod and tie some sort of thick ribbon (so you can easily see it) around all of the strands. Then move several feet down the curtain and tie the strands again using the same method as above. This will allow you to then take down your curtain and place it into a storage bag. We use all kinds of things from long duffel bags, to large kitchen trash bags, to under-bed storage boxes for our Beaded Curtains. If you use large kitchen trash bags to store them and wrap the bag tight around the beads, the beads will stay nice. Try to store your beaded curtains so that they are not sliding and shifting around each other to avoid scratching of the beads. You'll get a longer lifespan of sparkle this way! The nice thing about Acrylic Beaded Curtains is that they can also be polished using furniture spray like Liquid Gold and a rag.

How many eyelets are there on a beaded curtain rod?

There are two eyelets at the top of each beaded curtain rod that you can use to hang your Beaded Curtains. For event installations, many of our clients use zip-ties to affix the curtains to their existing structures such as trusses or other frame work.

How long should a curtain be before untangling?

Even if your curtain is 12 feet long or longer, it's MUCH easier to start untangling it if you are able to hang it up in the air high enough so that the beads do not touch the ground. Never try to untangle a beaded curtain while it is lying on the ground.

Can you hang beaded curtains on a rod?

Our beaded curtains, no matter the bead type, all come hanging on their own rod. The beads are already inserted into this rod. You just follow the simple directions below (basically take 2 nails and put 'em up!) and you will have your beaded curtain up in no time at all!

Why hang beaded curtains?

Beaded curtains come in a variety of beads and other materials. Apart from being attractive, they help to keep insects out. Hanging beaded curtains in doorways or on window frames is simple and only takes a few minutes.

What are beaded curtains made of?

Beaded curtains are made with acrylic, glass, bamboo or wood. The beads are shaped into animals, gems, disco balls, and many other designs. Some curtains are made with just strands of beads, and others are woven together. Woven beaded curtains are often used as blinds.