How to Make a Jacob's Ladder!
- Materials. The main thing you need for this instructable is a high voltage power source. ...
- Prepare the Electrodes. If you are using a coat hanger, first untwist the top, and straighten the whole thing out. ...
- Put It Together! Drill a pair of holes in either side of your base, and stick the ends of the electrodes in. ...
- Shock and Awe! ...
How to build a Jacob's Ladder?
How to Build a Five-foot-tall Jacob's Ladder
- Obtain Neon Sign Transformer. Get a neon sign transformer rated for 9 - 12 kV and 30 mA. ...
- Build a Base. Build a base from the something nonconductive and nonflammable. ...
- Mount Copper Pipes. Mount two copper pipes on the dowels. ...
- Set the Spacing. Set the spacing at the top of the copper pipes. ...
- Build a Case. ...
- Power Up and Take Pictures. ...
How to make Jacob's Ladder out of string?
How to Make Jacob's Ladder out of String.
- 1. Cut a length of string or yarn. The string should be twice as long as the distance between your shoulders. Another way to measure is by wrapping ...
- 2. Tie the string ends together. Secure the string in a square knot so it won't pull loose. Use a square knot and cut off the excess when the string ...
- 3. Position your thumb and pinky. Start with the string across your palm in an open position. Your thumb and pinky should be looped by the string.
- 4. Hook your right index finger. Guide your finger through the string in front of your three left fingers. Return your right hand to its original ...
How to quilt a Jacobs Ladder?
This block goes by a number of other names including:
- Going to Chicago, Nancy Page
- Golden Stairs, Nancy Cabot
- Off to San Francisco
- Railroad
- Road to California
- Susie's Fancy
How to build Jacob's Ladder?
Make a Jacobs Ladder Toy from Chocolate! Don't freak out at the number of steps. The only reason there are so many is because I broke it down into tiny, do-able steps. I promise you it's really easy to make! Step 1 Cut out 9 thin strips of green paper and 6 thin strips of red paper, or whatever two colors you've chosen. ...
How do I make a Jacobs ladder?
0:124:33How to make a wooden Jacob's Ladder toy with hand tools | A tutorialYouTubeStart of suggested clipEnd of suggested clipFirst thing is to cut down the board to a manageable length. I'm then going to use a hand plane andMoreFirst thing is to cut down the board to a manageable length. I'm then going to use a hand plane and a cabinet scraper to flatten it out a little bit of sandpaper.
How do you make Jacob's ladder for kids?
2:3915:19Making A Jacob's Ladder Kid's Toy (DIY Woodcraft) - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell when we fastened the ribbon to the wood. As you can see this is just stapled on there with aMoreWell when we fastened the ribbon to the wood. As you can see this is just stapled on there with a stapler. You can use little little little tacks little nails. Or hot glue.
How do you make a wooden Jacob's ladder?
A Traditional Jacob's LadderStep 1: Gather Materials & Tools. General Remarks: ... Step 2: Prepare the Blocks. ... Step 3: Prepare the Ribbons. ... Step 4: Nail the Ribbons to the First Block. ... Step 5: Add the Second Block. ... Step 6: Add the Rest of the Blocks. ... Step 7: Play! ... 4 People Made This Project!More items...
How do you make a Jacob's ladder with cardboard?
Place a piece of cardboard over the top and glue it down or stick it along the sides. Fold the ribbons and run them over the top of the cardboard. Put down another square of cardboard. Fold the ribbons over and repeat all the steps until you have used all the cardboard.
How do I make a ladder?
0:157:41How to Make a Ladder - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe top and the bottom tread need to groove in and that will become apparent what that's for later.MoreThe top and the bottom tread need to groove in and that will become apparent what that's for later. On. Just to make things easy.
How do you make a Jacob's ladder with a microwave transformer?
1:425:35DANGER How to Make A Jacobs Ladder using an old microwave ...YouTubeStart of suggested clipEnd of suggested clipHere one is connected to the chassis of the microwave transformer the other one is connected to theMoreHere one is connected to the chassis of the microwave transformer the other one is connected to the center tap the high voltage coil.
How do you make a box ladder?
0:206:03How to build a ladder platform, by Matt Fox of HGTV's room by room.YouTubeStart of suggested clipEnd of suggested clipCut out the two legs using the measurements that you found on the steps. Now I'm in the habit ofMoreCut out the two legs using the measurements that you found on the steps. Now I'm in the habit of using a speed square to ensure my blade is cutting square. But that's just.
How does a Jacob's ladder toy work?
When the Jacob's Ladder is turned on, electrons are fed into one of the wires. These electrons want to get away from each other, so they jump across to the other wire, which is connected to the ground. When they jump, we see a bright spark in the air. The spark then climbs up the ladder as it heats the air around it.
How do you make a Jacob's ladder with neon transformer?
0:001:55Jacob's Ladder Experiment with an Old Neon Sign TransformerYouTubeStart of suggested clipEnd of suggested clipFor the output electrodes i have some leftover 10 gauge copper wire from another. Project. TheMoreFor the output electrodes i have some leftover 10 gauge copper wire from another. Project. The transformer's primary side has two input terminals for 120 volt line and neutral.
Step 1: Materials
The power module and flyback transformer came in one package. You'll need some two conductor wire for power, or use a flat connector.
Step 3: Power Connections
The two blue coils on the side of the Flyback Transformer are connected in the middle. Each end will go into one of the three holes on the output side of the module.
Step 1: Materials
The main thing you need for this instructable is a high voltage power source. Most people (including me!) use neon sign transformers to do this. Other examples of high voltage power supplies might be: a furnace ignition transformer, or a flyback transformer from an old TV.
Step 2: Prepare the Electrodes
If you are using a coat hanger, first untwist the top, and straighten the whole thing out. This can be very difficult, as trying to bend it usually ends with it twisting out of your grip.
Step 3: Put It Together!
Drill a pair of holes in either side of your base, and stick the ends of the electrodes in. In order for the electrodes to be close enough, you need to bend them again. Once you get the bottoms close enough, bend them up and flare them out.
Step 4: Shock and Awe!
Turn on the power supply and amaze your friends, shock them with how much of an evil genius you are! Muahahhaha!! If you have the time and are willing to put in the effort, it makes the whole thing look nice if you put it inside of a box.
How to make a Jacob's ladder?
Step 1: Gather Materials & Tools. First you have to choose what dimensions you would like for your Jacob's Ladder. There is a great deal of flexibility here: you can make a wide and very long Jacob's Ladder, or a thin and/or short one. The size and length of the board and ribbon needed vary accordingly.
What tools do you need to make Jacob's ladder?
Go wild with the colors -- you can use up to 3 different colors in one Jacob's Ladder.) Tools: 1) small hammer. 2) ruler, straight-edge, and pencil. 3) hacksaw or power-saw. 4) scissors.
How many colors can you use in Jacob's ladder?
Go wild with the colors -- you can use up to 3 different colors in one Jacob's Ladder.)
Can you scoot ribbon with a nail?
The slack in the second picture below is a good cue. You can scoot the ribbon with your nail to make a bit of slack before you hammer it in. A 1/4" would be enough, I think, though I just went by feel. If there is not enough slack, the whole creation will stick without flipping properly.
How to make a chocolate sandbox?
Step 1. Cut out 9 thin strips of green paper and 6 thin strips of red paper, or whatever two colors you've chosen. Each strip should be as long as two blocks of chocolate laid end-to-end, and about 1/4 as wide as a block of chocolate.
How to make a Christmas tree out of paper?
All you need is: 1 6 small blocks of chocolate (I found some Christmas-themed mini-blocks, but I think Kit Kats could work well too) 2 2 sheets of paper of different colors 3 Adhesive tape 4 Scissors 5 Ruler
