Creating Leather Straps and Handles
- Step 1: Using Grommets. Before we talk about straps directly, we're going to learn how to use one more piece of hardware...
- Step 2: Single Layer Shoulder Straps. When you want to create a strap out of single layer of leather, you need to use...
- Step 3: Double Layer Shoulder Straps. Double layer shoulder straps are basically made the...
How do you make a reinforced leather strap?
Two layers of thinner leather are sewn together to create a reinforced strap with grain on both sides. To create the pattern, just follow the same measurements you used to create a single layer shoulder strap, but laminate two layers of thinner leather to create each strap.
How do you make your own shoulder holster?
Get the right amount of leather. You'll need quite a bit of leather to make your own shoulder holster. Make sure to buy enough, even if it doesn't match—you can dye it when you're done. Make a time frame. This project will take multiple days to accomplish. However, if you spread it out too long, your leather will be more difficult to work with.
How do you attach a holster with leather cement?
Attach the holster. If you're a righty, use your leather cement to attach your holster to the left shoulder strap. Put the straps on and mark where you'd like to have the holster. Once it's marked, take the straps off and use your cement to attach it.
How do you make a leather strap for a purse?
This kind of strap or handle is made by sewing a piece of leather around a core made out of a rope or cord. To attach the handle, you need to create shaped ends on the strap that will be sewn or riveted directly onto the bag, or onto a ring.
How do you make leather straps?
3:158:46LEATHER WORKING Basics: How to Make LEGIT LEATHER StrapsYouTubeStart of suggested clipEnd of suggested clipOnce you have the strap length all cut out then you can cut the ends to whatever shape you like inMoreOnce you have the strap length all cut out then you can cut the ends to whatever shape you like in this case I cut one end to a point for the buckle fold on one of the straps.
How do you make a shoulder strap?
3:5318:52How to Make an Adjustable Purse Strap- Tutorial by Crafty GeminiYouTubeStart of suggested clipEnd of suggested clipSo I like to start off with a four inch wide strip of fabric. And. That's if I'm using one-inch wideMoreSo I like to start off with a four inch wide strip of fabric. And. That's if I'm using one-inch wide rings. All right so these are D rings.
How do you make a padded leather shoulder strap?
1:2314:14Leather Shoulder Strap Pad - Free PDF Pattern Pack / Several SizesYouTubeStart of suggested clipEnd of suggested clipAnd some recommended leather weight for this project. And then each one is broken down by the strapMoreAnd some recommended leather weight for this project. And then each one is broken down by the strap width so it goes from inch. And a half strap. With. So 1.25 to 1 down to 3/4 of an inch.
How do you hand sew leather straps?
3:5321:24Hand Stitched Leather Shoulder Strap Tutorial (crafted by hand in HD)YouTubeStart of suggested clipEnd of suggested clipUsing a stitching chisel punch holes along your stitching groove while punching around the tip I useMoreUsing a stitching chisel punch holes along your stitching groove while punching around the tip I use the one and two prong stitching chisel saddle stitch the long belt strap.
How do you make bag shoulder straps?
1:081:03:07Bag Making Basics: Crossbody Straps! Let's Look At Three Versions!YouTubeStart of suggested clipEnd of suggested clipIt's probably the cheapest strap to make to be completely honest waterproof canvas is not veryMoreIt's probably the cheapest strap to make to be completely honest waterproof canvas is not very expensive. And you don't require any interfacing for it so you really just need the material.
How long should a shoulder strap Be?
Some stylists recommend an 18-inch drop for women 5' 2" and shorter. Depending on how you'd want your bag to fall on your hips, a drop of about 20 inches matches well with women up to 5' 6." For women 5' 8" or taller, a drop of 22 inches or more might be more apt.
How do you make leather bag handles?
1:4328:46Making a Tubular Leather Handle // TUTORIAL - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the first thing that we need to do is we need to cut a strip of our leather we need to get theMoreSo the first thing that we need to do is we need to cut a strip of our leather we need to get the right length. Now i've been doing a little testing. This is a seven inch piece of cord.
How do you make faux leather straps?
0:162:20How to Make a Faux Leather Crossbody Strap - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen and top stitch an eighth inch from each side of the seam. Trim the extra fabric even with theMoreOpen and top stitch an eighth inch from each side of the seam. Trim the extra fabric even with the edges of the strap. Next with wrong sides together fold the strap in half along the lengths.
How do you make a leather wristlet strap?
1:4214:57Make a Leather Key Fob or Wristlet Strap with Elke Bergeron - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're going to slide the bar. Over. Until we hit the half-inch mark you'll balance it carefullyMoreSo we're going to slide the bar. Over. Until we hit the half-inch mark you'll balance it carefully with your fingers. While you tighten. The piece on the back really nice and tight so now it's stuck.
Can you sew leather with regular sewing machine?
One of the most common questions we get asked is, "Can you really sew leather on a home sewing machine?" And the answer is YES! Any good-quality home sewing machine should be able to handle leather; you just need to make a few simple modifications to get your machine leather-ready.
How do you join two pieces of leather together?
When you're using glues/adhesives to join leather permanently and the glue with be the primary mechanism holding the materials together, contact cement is usually the best option. It is very strong, flexible, water resistant, and will bond the leather permanently. Barge All Purpose Cement is a quality option here.
Can I sew leather by hand?
Hand sewing is a very important skill in leatherwork, and it's fairly easy to master even if you have no previous sewing experience. Part of what makes leather hand sewing a bit different than fabric sewing is the fact that you are sewing through pre-punched holes like the ones we created in the last two lessons.
How do you make a strap out of fabric?
0:151:24How to Sew a Strap: The Quick and Easy Way! - YouTubeYouTubeStart of suggested clipEnd of suggested clipBring the opposing folded edge over and pin it to the side that contains your stabilizer. So allMoreBring the opposing folded edge over and pin it to the side that contains your stabilizer. So all layers together with at least three or four rows of stitching.
How do you make a top strap?
0:0510:05How to Sew Rouleau or Spaghetti Straps - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt really depends on you on how long you need your strip to be whether it's going to be a spaghettiMoreIt really depends on you on how long you need your strip to be whether it's going to be a spaghetti strap or it's going to be a bunt loop. But the thing that I like to do is always cut out my strip.
How do you make adjustable straps?
2:4110:14How to Make an Adjustable Strap 2 Different Ways - YouTubeYouTubeStart of suggested clipEnd of suggested clipThrough the underside over and under that middle bar. Okay so give yourself a little bit of room ifMoreThrough the underside over and under that middle bar. Okay so give yourself a little bit of room if you need to pull some of the strap out you can.
How do you make ribbon straps?
0:001:14How to Sew Narrow Straps with a Ribbon and Sequin Foot - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat I can use my ribbon sequin foot to sew this little strip together and it's really easy now. IMoreThat I can use my ribbon sequin foot to sew this little strip together and it's really easy now. I already cut one inch strips of fabric. And I folded it and press it bias tape style.
Step 1: Using Grommets
Before we talk about straps directly, we're going to learn how to use one more piece of hardware that can be useful in belt and strap connections: grommets.
Step 2: Single Layer Shoulder Straps
When you want to create a strap out of single layer of leather, you need to use leather that is thick and strong enough that it won't stretch or break. You should choose a leather that is at least 6-9 oz and not stretchy.
Step 3: Double Layer Shoulder Straps
Double layer shoulder straps are basically made the same way we made the double layer belt in the last lesson. Two layers of thinner leather are sewn together to create a reinforced strap with grain on both sides.
Step 4: Round Handles or Straps
A round handle or strap adds a nice look to a leather or canvas bag and also makes a thin strap stronger. Round handles are often made in pairs which are attached to each side of a bag with an open top. You could also make a single long round strap and attach it to the larger bag design we've created.
Step 5: Turn Your Small Bag Into a Shoulder Harness
The last strap variation I am going to show you is a double shoulder harness that will attach two of the smaller bags under your arms. Harness bags like these are great for festivals, concerts and other adventures where you want your hands free.
Step 6: You're Done!!
By adding a strap or belt of your choice, you've finished creating your own custom bag! If you've turned your bag into a purse, it will be a great size for holding your essentials, and a shoulder harness or hip belt gives you a convenient way to carry small items while still keeping your hands free.
Step 7: Taking Leatherwork Further
I hope that this class has left you feeling informed and inspired! It was my intention in these lessons, to not only direct you through the step by step process of making leather projects, but, more importantly, to empower you to come up with your own ideas.
