To make your own lighted wine bottles, just take your favorite empty wine bottle, place these twinkle lights inside, and add the stopper. That’s it! There is nothing to plug in, no outlets to find, and no ugly wires to hide because the battery is IN the stopper.
How to decorate wine bottles with lights?
How to Decorate Wine Bottles
- Method 1 Method 1 of 4: Painting Wine Bottles Download Article. Get acrylic paints. ...
- Method 2 Method 2 of 4: Making Wine Bottle Lights Download Article. Drill a hole at the base of your wine bottle. ...
- Method 3 Method 3 of 4: Decorating Wine Bottles with Glitter Download Article. ...
- Method 4 Method 4 of 4: Wrapping Wine Bottles with Twine Download Article. ...
How to make lighted wine bottles without drilling?
- An empty, cleaned wine bottle that I happened to have (okay, I drank the last few ounces of rich, sweet red wine I usually keep on hand that I use ...
- Battery-operated LED mini light set (15 lights), on sale at Walgreens a few weeks ago 3 for $10. ...
- Four decorative Christmas picks temporarily borrowed from my Christmas tree
How to make lightening in a bottle?
Procedure
- Fold tin foil around your plastic fork so that it looks like a big spatula. ...
- Put on the rubber glove and use your gloved hand to rub the Styrofoam plate or rubber balloon on your hair or wool.
- Place the plate or balloon on your cutting board, and use the gloved hand to pick up your tin foil spatula.
How to open a bottle of wine with a lighter?
Open wine bottle with a spoon
- If you have a wine bottle with a skirted metal cap on top, then you may as well open it with a spoon with little or no heating.
- The metal body of the cap extends to become thin. The spoon can be used to pull the cap away from the thin clasp.
- As the clasp loosens with air entering in, it eventually becomes easier to pull away from the entire metal cap.
How do you make a wine bottle light fixture?
1:084:24How to Make a Wine Bottle Pendant Light - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd cut the wire using a pair of wire cutters measure an extra foot of wire to accommodate the extraMoreAnd cut the wire using a pair of wire cutters measure an extra foot of wire to accommodate the extra wire you'll need to wire into the electrical circuit at the ceiling.
How do you turn a glass bottle into a hanging light?
0:002:53How to Make a Pendant Light From an Alcohol Bottle - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you already have a vessel for your pendant light you don't want to cut a bottle go ahead and skipMoreIf you already have a vessel for your pendant light you don't want to cut a bottle go ahead and skip to about a minute 10 and I'll show you how to do the electric. Work.
How do you turn a bottle into a light?
0:308:14Make a Lamp From a Bottle - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm using a six millimeter diamond bit it takes a while the bottom of the bottle is pretty. Thick.MoreI'm using a six millimeter diamond bit it takes a while the bottom of the bottle is pretty. Thick. Next I unravel the fairy lights and pass them through the hole into the bottle.
How do you make a chandelier out of a glass bottle?
7 Steps to Make a Chandelier from Old Wine Bottles:Gather your tools and materials.Score and cut your wine bottles.Add the necessary electrical wiring.Shape your wooden base.Set your wires in place.Shape the ceiling canopy.Connect the plank and canopy piece.Light up the room!
How do you make a hanging light fixture?
1:372:514 Easy DIY Pendant Lights | Glam It Yourself - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd cut an opening out. And then pop this through screw it on add the ball same routine as all theMoreAnd cut an opening out. And then pop this through screw it on add the ball same routine as all the others and hang it and now you have a really adorable shabby chic fixture.
How do you make a bottle candle holder?
0:162:44Sunrise DIY - Turning a wine bottle into a candle - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm going to soak my string in the acetone which I've already done and then essentially tie itMoreI'm going to soak my string in the acetone which I've already done and then essentially tie it around they say usually it's at the base. Because I'm going to try and make a candle out of this.
How do you make a bottle lamp at home?
0:061:46DIY: Easy to make Bottle Lamp - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe'll start by drilling a hole in a bottle as you can see I have put a bottle in the water to keepMoreWe'll start by drilling a hole in a bottle as you can see I have put a bottle in the water to keep it cool lubricated and to prevent any glass dust in the air. First we'll put a washer on the cable.
How do you make a light out of a liquor bottle?
Liquor Bottle LightsStep 1: Procure Liquor Bottles. This is the fun part. ... Step 2: Wrap the Bottom of the Bottle With Tape. Wrap the bottom of the bottle with masking tape. ... Step 4: Sand Off the Rough Edges. ... Step 5: Assembly the Lamp Parts. ... Step 6: Screw in a Light Bulb and Enjoy the Lamp!
How do you make a bottle light without a drill?
Home > Wine > How To Make Lighted Wine Bottles Without Drilling? Using hot glue, glue glass pebbles around the bottle. As the light goes through them, it gives them a nice effect. You can decorate it with Modge Podge and pretty napkins.
How do you make a homemade chandelier?
0:353:56Diy Chandelier Home Decor Simple, Quick and Inexpensive!!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe next step is to make the design for the middle of the chandelier. Using spoons and acrylic chipsMoreThe next step is to make the design for the middle of the chandelier. Using spoons and acrylic chips. A. Full list of all the items used will be in the description. Box below.
How do you hang a wine bottle from the ceiling?
How to Hang Bottles From the CeilingSpray each bottle with adhesive remover, and let it soak in to loosen the glue on the label. ... Wash each bottle in a sink full of hot, soapy water. ... Run a stud finder over the ceiling in the area you want to hang the bottles in. ... Insert an eye screw directly into the beam.More items...•
How do you cut a wine bottle?
5:3010:11Wine Bottle Cutter 30 seconds Perfect Edge Glass Bottle ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you need to cut a wine bottle you just need hot water you don't need a blowtorch.MoreAll you need to cut a wine bottle you just need hot water you don't need a blowtorch.
Step 1: Gather the Materials and Tools
Materials: Old Lamp Empty Wine Bottle Inline Switch Light Bulb (make sure it will fit in the bottle) I used a small 60 Watt equivalent CFL but would try 30-40 Watt equivalent next time. Tools: Small Flat Tip Screw Driver Wire Cutters Box Cutter (exacto knife would be better) Dremel with Carbide Blade 2 X Handi Clamps Small Torch (bought for $20 at Lowes) Kitchen Sink...seriously Sandpaper, coarse and fine Paper towels Marker.
Step 2: Disassemble the Lamp
UNPLUG THE LAMP! -Separate the socket from the base of the lamp. (Pic 1) -Remove the protective cover over socket. May have to use the screw driver if your lamp is as old as mine was. Don't worry about ruining the brass finish either as the entire assembly will be inside the wine bottle when you're finished.
Step 3: Attach Inline Switch
This will vary depending on the switch you are using; so keeping that in mind, I will show you what I did with mine. -Disassemble switch (Pic 1). -About 1/2 way down the wire (or wherever you think it would be most convient to have an on/off switch), use an exacto knife to separate the two wires BEING CAREFUL NOT TO CUT THE INSULATION EXPOSING THE WIRES.
Step 4: Break the Bottle, Phase 1
This is the hardest part of the entire project and I encourage you to test the step out on a bottle you do not intend to use for your lamp. There are many videos out there on how to cut a wine bottle. This one (http://www.youtube.com/watch?feature=endscreen&NR=1&v=sFXngPx3w3M) on Youtube seems particularly popular.
Step 5: Break the Bottle, Phase 2
This is the hardest part of the entire project and I encourage you to test the step out on a bottle you do not intend to use for your lamp. There are many videos out there on how to cut a wine bottle. This one (http://www.youtube.com/watch?feature=endscreen&NR=1&v=sFXngPx3w3M) on Youtube seems particularly popular.
Step 6: Sand the Bottle
Sand the bottle along the break. Be sure to bevel the edges as well. The bottom should be smooth enough to run a finger front-to-back and side-to-side along the break. I started with 60 grit sandpaper, then moved to 100, then 150. When you are done sanding, clean the bottle.
How to Make Wine Bottle Lights Without Drilling
If you love the look of lighted wine bottles but not a huge fan of the DIY involved? If you prefer no drilling, no gluing, and with no Martha Stewart skills required (who has time for all of that?!) you’ll love these wine bottle lights.
Wine Bottle Lights
Here’s a closer look at the wine bottle lights: each set comes with batteries and features an on/off switch. They’re equipped with ten waterproof LED lights and simply need to be dropped into a wine bottle. It’s so easy.
Where to Buy Wine Bottle Lights and Mason Jar Lights
Want to make wine bottle lights of your own? You can buy these beautiful twinkle lights here at ElectricCrowns! They’re amazing, I tell ya. I don’t always say this, but I really need some of my own. These are beautiful for outdoor patios or front porches, don’t you think?
What is the purpose of masking tape on glass bottles?
The masking tape helps reduce the glass chipping and allows us put a cutting line on the bottle. Trace a line on the tape to cut use when cutting. The line has to be above the bottom of the glass bottle. Some bottles are thicker than others!
How to attach a dremel to wood?
But you can attach the Dremel to any wood you have laying around. Line up the board so you can put the bottom of the bottle against the wood. This will help you cut a straight line because the board prevents the Dremel from moving too far in either direction. I cut the first bottle with the Dremel clamped to the table.
