Method 2 Making a Single Homecoming Mum Download Article
- Cut some 4-inch lengths from #3 and #5 ribbon until you have enough to create cones around the entire edge of one cardboard backer.
- Overlap the pieces and twist both ends in the same direction to form a cone shape. ...
- Staple the completed cone-shaped ribbon to the back edges of the cardboard backer. ...
How many ribbons do you need to make a mum?
The key to having a good mum is a variety of different styles of ribbons so you’ll want to check out this next one called the military braid. You’ll need 4 yards of each color of ribbon to make your 36” braid. Last, but never the least, the Texas chain. You’ll need 3 equal sized ribbons. For a 36″ braid, they’ll need to be 36 inches each.
How do you attach ribbons to a mum flower?
This is going to be the wreath or ribbons around the mum flower Use Round 3, which is slightly smaller and flat along the bottom. But you still want to assemble the ribbons in a circle because they will go around the flower. Attach loops of ribbon, flat loops or crossed loops, evenly in a circle, around the edge of the Round 3.
How do you make a mum collar wreath?
Pick up Round 3, the mum collar cardboard round, which its ribbon “wreath” and determine where to add the ribbons straight in the middle of the flat edge of the cardboard “round.” Check the position by holding up the mum flower and seeing how it will look with the mum flower. Use hot glue to attach these ribbons to the ribbon collar round.
What ribbon should I use for a mother’s Day DIY mummy makeover?
If this is your first DIY mum, the loop ribbon is the perfect place to start. You’ll need at least two different types of ribbons, a wide ribbon for the background and a contrasting ribbon for the top. I’m actually using three ribbons because for my loops I’m layering a see through silver ribbon on top of the solid white ribbon.
How do you make a mum step by step?
0:4316:22Homecoming Mum and Garter Mum Tutorial | Mums with PicturesYouTubeStart of suggested clipEnd of suggested clipPlace a loop at the top. And then staple if you prefer you can also use your glue gun nail. You wantMorePlace a loop at the top. And then staple if you prefer you can also use your glue gun nail. You want to staple a loop. Across from it on the bottom.
How much ribbon do I need to make a mum?
Here's what you need to make a Homecoming Mum:12 yards #16 ribbon in Color #1 (2-inches wide)8 yards #16 ribbon in Color #2 (2-inches wide)3 yards #9 ribbon in Color #1 (1.25-inches wide)4 yards #9 ribbon in Color #2 (1.25-inches wide)2 yards #5 ribbon in Color #2 (7/8-inches wide)More items...•
What type of ribbon do you use to make mums?
“What kind of ribbon is used for homecoming mums?” Most craft stores that take mum orders use satin acetate ribbon for their homecoming mum ribbon.
How Long Should mum ribbons be?
about 2 feet longIt needs to be sturdy, because it will carry the weight of the mum when it hangs. Step 5: Cut more ribbons to the desired length — most mums are about 2 feet long. Starting with the widest ribbon first, staple one end to the edge of the card stock opposite the one taking the weight of the mum.
How do you make braided homecoming mums with ribbon?
1:425:10How To Make The Military Braid | Texas Homecoming Mums 101YouTubeStart of suggested clipEnd of suggested clipThrough the back and then hold it then over here you're going to take your blue piece. And do theMoreThrough the back and then hold it then over here you're going to take your blue piece. And do the same thing go in the other direction push it through and don't worry if it gets too big so then you'll
How much is it to make a homecoming mum?
How much do Homecoming Mums cost? Prices for mums can range from as low as $30 to as high as $500. It's cheaper to buy your own materials and make them yourself but you'll save time and get a perfect “Mum” if you buy one from a store.
How do you put a mum together?
2:586:35How to Make a Homecoming Mum - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'll put some hot glue right here at the base of my round. And then just a touch the silverMoreSo I'll put some hot glue right here at the base of my round. And then just a touch the silver ribbon right on top. And there we go now you'll notice that this is really long for a girl's mum it
How do you make a mum flower?
0:072:00Easy Buttercream Mum - Fall flower Chrysanthemum piping tutorialYouTubeStart of suggested clipEnd of suggested clipApply pressure pull back fully release pressure before pulling away. It is important to note thatMoreApply pressure pull back fully release pressure before pulling away. It is important to note that these petals are piped directly next to one another but not overlapping. As we move down our mound.
How do you make mini mums?
0:0014:12Blinged Mini Homecoming Mum tutorial • how to make ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipI cut my one in 5 16 inch ribbons at the longest is 13 and a half inches. And then i'm tapering themMoreI cut my one in 5 16 inch ribbons at the longest is 13 and a half inches. And then i'm tapering them shorter as i go so i start in the middle. And then i taper.
What are the sizes of mums?
Most garden mums grow to 2 to 3 feet in size and require at least a 12-inch container for the best support.
What supplies do I need to make a mum?
Things You'll NeedCurling ribbon.3 round cardboard backing circles.Mum flower (fake or fresh)Small plush trinkets such as a teddy bear.One large safety pin.Scissors.Hot glue gun.Stapler.
How do you fold a mums ribbon?
1:0214:48Homecoming Mum Braids | Mum Chains| Mum Accent Ribbon TutorialYouTubeStart of suggested clipEnd of suggested clipNow we want to take both ends and fold them in. So they meet inside the crease I usually use my twoMoreNow we want to take both ends and fold them in. So they meet inside the crease I usually use my two fingers to fold them in and then push them down into the crease they must sit flush in the crease.
How do you make a mum flower?
0:072:00Easy Buttercream Mum - Fall flower Chrysanthemum piping tutorialYouTubeStart of suggested clipEnd of suggested clipApply pressure pull back fully release pressure before pulling away. It is important to note thatMoreApply pressure pull back fully release pressure before pulling away. It is important to note that these petals are piped directly next to one another but not overlapping. As we move down our mound.
What do you need to make a homecoming garter?
Hot glue gun. 3-1/4 yards of both 1-1/2-inch-wide and 1-inch-wide ribbon in school colors for the loops in steps 2 and 8. 1-1/3 yard of 1-1/2-inch-wide ribbon in a school color for the points in step 3. Four-inch ball mum, white or school color.
DIY Homecoming Mum – Loop Ribbon
If this is your first DIY mum, the loop ribbon is the perfect place to start. You’ll need at least two different types of ribbons, a wide ribbon for the background and a contrasting ribbon for the top. I’m actually using three ribbons because for my loops I’m layering a see through silver ribbon on top of the solid white ribbon.
DIY Homecoming Mum – Heart Braid or Chain of Hearts
This mum ribbon is just the next step up from the loop ribbon. Again you will need a base ribbon and many (dozens) loops or ribbon. You should use at least two different kinds of ribbon, but they need to be the same width.
Ribbon Variations
Customers find that ribbon colors vary as well. Most times the school colors of the wearer are the chosen colors. But in some cases the wearer chooses to use their favorite colors instead.
Planning the Homecoming Mum Ribbon to use
If you are planning to make your own mum we recommend satin. Double faced satin is easy to find and it is the same color on both sides. Single f aced satin ribbon is also easy to find however the color will vary on the reverse side.
Directions, steps, and photos to make your own High School Homecoming mum
We used two different types of braids in this mum. The post The Best Homecoming Mum Braid Tutorials covers the tutorials we used to get instructions to make the braids, and be sure to check out my beginners tips for making the Homecoming ribbon braids.
Supplies to DIY Homecoming mum
You can purchase the cardboard rounds, but they’re price is exorbitant compared to what they are.
Braids and other fancy ribbons – Homecoming Mum Supplies
You’ll want some fancier ribbons to really glam up your mum. See Homecoming Mums – How to make a Homecoming mum (with pictures) and save money for ideas for how to find inexpensive fancy ribbons and trims for fancy and metallic streamers.
Homecoming mum Ribbons and Streamers
Decide on a base color and use the majority of streamers that color. Usually the base color is the darker color and the lighter color is the accent color, usually gold/yellow or white/silver.
Add streamers to the Homecoming Mum collar
Group some of the shorter streamers and the fancier braids that you want to be prominent together. These hanging ribbons will attach on top of the ribbon collar, right below the flower mum. This will help give the homecoming mum dimension, so that it will look more like ribbons tied to a flower, and less like a giant prize ribbon.
Prepare Homecoming mum Round 1 for attachment of the ribbon streamers
On the hanging streamers round, Round 1, make a mark at the top center so you can keep that pointing up. Or go ahead and attach to center hanging loop to the back of the cardboard round, so that you always hold it up by that. (See directions at the end.)
Assemble the Homecoming Mum Streamers
Staple the first of the streamers into bunches of 2s and 3s that fan slightly, like you did for the streamers that will hang on the top of the mum collar round. This will decrease the number of staples you need to try to squeeze onto the little cardboard round!
Tips
If you are short on time, you can buy pre-made backers that already have ribbon points and streamers added.
Warnings
Be careful not to make your mum so heavy that it cannot be supported by a safety pin.
About This Article
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 21 people, some anonymous, worked to edit and improve it over time. This article has been viewed 308,140 times.
Ribbon Wreath DIY
Until this year, I have pretty much avoided Deco Mesh Wreaths, Burlap Wreaths and Ribbon Wreaths completely. They just weren’t quite my style. I like modern and simple. A lot of times mesh/burlap/ribbon end up kinda… busy.
Three Types of Ribbon Wreath Techniques
The first technique I tried is the bubble method. The result is a poofy, bubbly effect with the ribbons. It works best with wider ribbons (so you can cover more of the wire frame when you fluff the bubbles out).
Ribbon Wreath FAQs
Here are some commonly asked questions. I’ll add to this section as I get more questions on the topic, so check back often if interested! You can always email me at thehowtomom @ gmail.com if you have a question for me.
