Simple Construction Paper Basket
- 1 Prepare strips of paper to weave your basket. Use three sheets of 8.5" x 11" construction paper. ...
- 2 Weave the base of your basket. ...
- 3 Fold up the strips sticking out the sides of the basket. ...
- 4 Weave a strip of colored paper between the now vertical strips of the base, folding it to fit around the corner of the basket. ...
Full Answer
How to make baskets from natural materials?
The Manufacturing Process
- The process begins by choosing a design or standard pattern including shape and size. ...
- If the design calls for a wood base, the base is shaped, and holes are bored in the wood to accommodate the spokes forming the sides of the basket.
- A basket is built from the ground up. ...
- The sides of this kind of basket can be formed in either of two ways. ...
How to make a housewarming basket?
To assemble your basket:
- Collect a cute wicker basket and some lace material. Line the inside of the basket with the lace, letting some of the material hang off the sides.
- Put the largest items in first. For this basket, the magazine was the biggest, so I put it in first and built the basket with the magazine as the ...
- Choose the second largest items to assemble next. ...
How to make your own gift basket?
Method 1 Method 1 of 4: Basic Technique
- Decide on a theme. Nearly all gift baskets have some type of theme, and choosing a theme makes it easier to plan the contents of the basket.
- Make or buy the gift items. You can include store-bought items, homemade items, or a combination of both in your gift basket.
- Choose an appropriate basket. ...
- Layer filler in the bottom of the basket. ...
How to make a basket using cardboard?
Method 2 of 2: Circular Newspaper Basket
- Roll newspaper into tubes. First, cut a sheet of newspaper into quarters vertically - this does not have to be precise.
- Use a circular piece of cardboard to form the base. This can be as large or small as you want your basket to be.
- Use a second piece of cardboard, identical to the first, to finish the base. ...
- Fold the rays up and begin weaving. ...
How to make an origami basket with trapeziums?
Take 2 opposite corners and fold them in so they meet in the middle. Fold the 2 trapeziums in towards the middle and then stand them up. These are the sides of your origami basket. Take the sides that slope down and push down on them and flick the pointy bit up. Fold it down to the level of the other sides.
How to fold a paper sleeve?
Make a fold from all the corners: Diagonal to diagonal and the other 2 corners. Fold the paper in half from the top to the bottom and from the left to the right. You should have 4 folds. Take 2 opposite corners and fold them in so they meet in the middle.
What to put in an origami basket?
You could keep small items in the basket, like paper clips, pins or buttons. Or, make some lovely paper flowers to add to your little origami basket.
How to add a handle to a basket?
How do I add a handle? Community Answer. You can add a paper handle just by cutting a strip of paper from the same paper used to make the basket, of a width about 1/2 to 1 inch (1-2.5cm). Staple or glue the ends of the strip by to the sides of the basket in its middle. If you don't want to glue or staple it, then cut small slits into the edges ...
How many times has wikihow been viewed?
To create this article, 30 people, some anonymous, worked to edit and improve it over time. This article has been viewed 153,924 times.
How many people edit wikihow?
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 30 people, some anonymous, worked to edit and improve it over time. This article has been viewed 153,873 times.
How to get pointy bit up?
Take the sides that slope down and push down on them and flick the pointy bit up.
What do you need to cut a willow reed?
You will need an awl for making holes for inserting the willow, cane or reed, along with a good, sharp pair of secateurs for cutting. You will use a pair of nose-pliers to pinch the reed where you want to bend it at right-angles when making borders. If you don't squeeze it well, when you try and bend it, it will split and break.
How to make a basket with reeds?
The easiest baskets to make are those that involve using flat reed for the stakes and round reed for weaving. Take 13 pieces of 3/4 inch flat cane cut at 30 inches, and mark the centers of the flat can on the wrong side. Now, form the bottom of the basket by inter-weaving the flat cane lengths in an under, over pattern with 7 pieces being laid on ...
What is basket making?
Basket making, or basketry, is an old traditional craft. Learn how to make a basket today from cane with our easy, step-by-step instructions. Making homemade baskets for beginners made easy.
How many pieces of flat oval reed to make a basket?
Using 24 pieces of flat-oval reed cut at 38 inches in length, now continue weaving in and out and building your basket. If you have a handle that tapers at the sides, you will have to keep the weaving very tight as you use less and less of the cane lengths as you build your basket. Just make sure that you do this after the first 2 rows, otherwise you will end up with a skew basket!
How many rows of brown reed for a basket?
To make your basket more interesting you can add a different color now, 3 rows of brown or blue look good using 1/4 inch flat-oval reed using the same reed color twice. And then add another 3 rows of natural 1/4 inch flat-oval reed as below the dyed area. Now it is time to tidy up and put on the rim.
How to finish a start and stop weave?
For those of you who are unfamiliar with the term start-and-stop-weave this is when you stagger the start of each row from the start of the last row. Finish the row by overlapping the same weave to the third stave after the start. Overlap the finish of each weave on the outside of the start.
What to do if you don't squeeze willow?
If you don't squeeze it well, when you try and bend it, it will split and break. You will need a tape measure of ruler to measure your work. Finally, if you are working with willow you will need a rapping iron that looks similar to a chisel, but it is blunt and used for tapping down the willow weave into position.
