How to Sew a Simple Zipper Pouch
- Step 1: Ironing and Cutting First, iron all of your fabric. ...
- Step 2: Sandwiching the Zipper Next, lay one square down face up. ...
- Step 3: Sewing the Zipper Time to go to the machine! ...
- Step 4: Now the Other Side... ...
- Step 5: Topstitching ...
- Step 6: It's Starting to Look Like a Pouch! ...
- Step 7: Sewing It All Together ...
- Step 8: Turning It Out ...
How to make a quilted zippered pouch?
- To keep it simple, use a pretty fat quarter in a print and affix fusible quilt batting t o the entire fat quarter. ...
- Once quilted, trim to square up.
- After that, sew straight rows of stitching in parallel lines first one way and then at 45 degree angles to the first rows. ...
How to install a lace zipper in a simple pouch?
Lace Zipper Tutorial…
- Cut 2 pieces of lace the same length as your zipper
- Fray check the ends of your lace
- Pin one of the pieces of lace to one side of the zipper.
- Using your zipper foot carefully sew on as close to the zipper teeth as possible. ...
- You should now have a pretty nice looking zipper! ...
How to sew a zipper pouch tutorial?
The Zipper Pouch Tutorial Begins
- Choose compatible fabric. Since fabric should be chosen based on usage, I chose this fabric as it is waterproof on both sides and easily wipes clean — great for a ...
- Choosing a Shape. This is my current makeup pouch. ...
- Cutting and Construction. Add double-sided tape to each edge where the zipper will be. ...
- Step By Step. ...
What is the best zipper?
Types of zippers
- Closed-end zipper. Metal teeth zippers. ...
- Separating zippers. This zipper has both ends open with one slider – they have a lock (a box and pin mechanism) at the bottom which can be used to ...
- Two way separating zippers. ...
- Continuous zipper chain. ...
- Nylon coil zippers. ...
- Metal teeth zippers. ...
- Molded plastic zippers. ...
- Pant Zippers. ...
- Invisible zippers. ...
- Bag zippers. ...
How big is a zippered pouch?
The zippered pouches I’m showing you how to make today measure approx 6″ x 8″ when finished. You can make these bags ANY size you want just change the size of your rectangles. If you do this, just make sure that your zipper is longer than the width of your pouch.
How to sew a zipper on a bag?
Using your zipper foot, top stitch close to the edge of the zipper. Unzip the Zipper. Pin the right sides of the bag outside together and pin the right sides of the bag lining together. Press the zipper seam allowance towards the lining pieces. Sew around the entire perimeter with a ½″ seam allowance.
How to get zipper out of bag?
Move the fabric so that it’s out of the way of the zipper. Pin the RIGHT side of your other lining piece to the WRONG side of the other side of the zipper. Pin the RIGHT side of your back bag outside piece to the RIGHT side of the zipper. Stitch through all layers. Using an iron, press all seams away from the zipper.
Where to iron shape flex?
Iron the Shape Flex interfacing to the wrong side of your pouch outside pieces.
Can you use a metal zipper on a polyester zipper?
Also, this tutorial uses polyester zippers. You can not use a metal zipper for this technique. You will be sewing over the zipper and you can only do that with a polyester zipper.
Who is Melissa Mortenson?
Melissa Mortenson is a blogger, designer, and content creator. She is the Polka Dot Chair blog founder and has been sharing fresh and creative ideas with readers since 2008. She is the author of “Project Teen, Handmade Gifts your Teen will Actually Love.” Her work and designs have been featured on HuffPost, TODAY, Pioneer Woman, HGTV, BuzzFeed, Better Homes & Gardens, and many other established publications. Her first fabric line, “Derby Style,” debuted in January 2015 through Riley Blake Designs. Additional fabric collections have followed it in subsequent years. A mom of 3, she considers herself lucky to be living in Kentucky.
How do you know where zipper tabs are?
You’ll know where the zipper tabs are since you can feel them with your fingers. You’re not supposed to sew over them, but do try to sew as close as possible.
How to close a zipper?
Place the zipper tabs over both ends of the zipper and stitch them in place to close the fold.
How much seam allowance do you need to sew a zipper?
Stitch the zipper to the main fabric piece with a small 1/8” seam allowance.
How to make a zipper stop?
You’ll need to create zipper stops out of thread, so sew a few stitches and backstitch over the zipper at both ends. If you’re using a metal zipper, it’s important to never hit the zipper teeth with your needle, so just slowly sew through the zipper teeth moving the hand wheel (do not use the foot pedal).
How many rectangles for zipper?
You need two fabric rectangles for the outer layer and two for the lining. Also, you need two small rectangles measuring 1 1/2” x 2” for the zipper tabs, and a zipper that is 1” shorter than the top edge of your main fabric piece. My fabric pieces are 6” wide x 5” tall, and my zipper measures exactly 5”. Using these measurements, my finished zipper ...
Where to pin lining on zipper?
Take the lining and pin it to the wrong side of the zipper, facing the right side of the main fabric piece. You’re now going to sew with a larger 1/4” seam allowance.
What is the most important part of a zipper?
The most important part here is to match the main fabrics at the zipper seam, like so.
How to make a zipper pouch look crisp?
Press the fabric around the zi pper. I like to use the tip of the iron to gentle press the fabric away from the zipper. I do this to both the outer fabric and the lining fabric. Pressing will make this zipper pouch look really crisp and professional.
How to sew a zipper on the other side?
First, lay the second piece of lining fabric right side facing up. Place the zipper unit on top also facing up, lining up the edges. Then place the last piece of outer fabric on top with the right side facing down.
How to glue basting?
The trick with glue basting is to heat set it with your iron after. I dabbed some liquid glue along the edge of my lining fabric and the edge of the zipper (so all three layers would be basted together.) I moved the zipper up and down as I went so I could get the edges nice and flush with each other. Once the glue is heat set, it’s ready for sewing!
How to layer a zipper pouch?
Layer the zipper pouch by laying a lining piece of fabric right side facing up. With the zipper also facing up, line up the edge of the zipper with the raw edge of the fabric.
Why do you unzip a zipper before sewing?
Before you sew, unzip the zipper a couple inches. The reason we unzip the zipper is because you don’t want to sew around the zipper pull. It’s hard and I don’t want to put you through that.
Why is it important to attach a zipper foot to a sewing machine?
Clip it onto your machine! This zipper foot is important because it allows you to sew closely to the teeth of the zipper. One thing you’ll notice immediately once you attach it is that if you leave the needle centered where it is, it will smash right into the zipper foot. So, the next thing you need to do is….
How to measure the length of a zipper pouch?
To determine the length of your pouch, measure the length of your zipper from tail to tail. For example, my zipper is 8" from pull to stopper, but 9 1/2" from tail to tail. That means I'll cut my fabric 9 1/2" long.
How to make a zipper with two squares?
Your first square will lay down face up. Then you'll add your zipper with the two squares attached, then top it off with your last square, face down. Make sure you edges line up and pin. Again, sew as close as you can to the teeth without sewing through them. Take it slow!
How to sew a zipper with a needle?
Just try to stay as close to the teeth of the zipper as you can (without sewing through them). It's best to go slow with this step. Keep your fingers clear of the needle, but close to the foot to help hold all things in place. Sew from edge to edge. Now, fold the two squares away from the zipper (right side out) and iron it down to maintain a good, ...
How to make a pouch with half open zipper?
Through the hole you left in the 1st side sewn, turn your pouch inside out. This is where the half open zipper comes in handy! Reach all the way through , pull it all the way out, then take special care to make sure all of your corners are nice and neat.
Where to start sewing a zipper pouch?
You will start sewing on your LINING (the inside of the bag). If you are using the same fabric for the whole pouch, check to see which side the zipper head is on. Be sure to start on the side AWAY from the zipper head. I started sewing a couple inches away from a long edge- not in the middle.
How far away should you top stitch a zipper?
Now that both sides are attached to the zipper and ironed down, you will topstitch both sides as shown. Try to stay about an eighth of an inch away from the edge of your fold.
How to make a pouch out of fabric?
Step 1: Ironing and Cutting . First, iron all of your fabric. This makes it easier for straight, even cuts. If you have a rotary cutter and cutting mat, this is where they come in. If not, you can just use regular scissors and a ruler to trace cutting lines. For this particular pouch, I cut four 8.5 inch squares.
Can you iron a lining out?
Now, with your lining out, give it a good ironing. The unsewn edges should tuck in easily with the existing seam allowance.
How to stop zipper from getting wobbly?
So just lift up the presser foot with the needle down, open up the layers, pull the zipper a bit down pass the needle and finish the final section. Reinforce the stitches with a bit of backstitching.
How to sew a zipper pouch?
Put your zipper presser foot on your sewing machine and start sewing along the edge where the zipper is. Go as close as possible to the zipper and make sure to sew in a straight line to get that professional look on your zip pouch.
How to make a zipper with lining fabric?
Set one piece of lining fabric on your workspace, with its face up. Then put the zipper on it, also face up. Align the top long edge of the zipper with the top long edge of the lining fabric. Now take one main fabric piece and put it on top of these two, with its face down.
How to sew a pouch?
Sew all around the pouch, from the lining over the main fabric and back to the lining. As you reach the corners, just stop, pivot, and then keep stitching. Go slowly over the zipper.
How to make a pouch out of a zipper?
Snip the corners and the ends of the zipper. Then turn the whole pouch inside-out through the opening you left. Push the corners out with your fingers, the scissors or chopsticks.
How to secure zippers in a lining?
Fold the zipper teeth toward the lining! Pin or clip the zipper to secure it in that position.
Can you make a zipper pouch any size?
Iron it well and cut out the desired dimensions. You can make the pouch any size you want or simply according to your zipper length.
Step One: Sew the outer fabric to the zipper
First, cut two pieces of outer fabric and two pieces of lining fabric that is 8 inches x 7 inches. I cut all four of mine from the same fabric instead of using a different fabric for the lining.
Step Two: Sew the lining fabric to the zipper
We now have the outer fabric attached, and it’s time to sew on the lining fabric.
Step Three: Sew the edges of the zippered pouch
You have successfully inserted the zipper – congrats! Next, we need to finish the sides of the zippered pouch.
Step Four: Turn the pouch and close the opening in the lining
Our zippered pouch is almost done! Before we can turn it right sides out, we need to trim away some bulk.
Step Five: Give it all a final press
Finally, push the lining through the zipper to the inside of the pouch.
