how do you make a snow globe out of a jar

How To Make A Mason Jar Snow Globe.

• Step 1: Secure your ornament to the lid. Using a glue gun, carefully glue the bottom of your tree ornament to the mason jar lid. Make sure to use ...
• Step 2: Add clear glue to your jar.
• Step 3: Add warm water and stir.
• Step 4: Add glitter and stir.
• Step 5: Place the lid.

Full Answer

How to make a homemade snow globe?

What You Do:

1. With a grown-up’s help, use the superglue or hot glue to affix your trees or other decorative items to the inside of the lid. Let dry.
2. Fill jar about 3/4 full of water (or about 1/2 if using corn syrup).
3. Put a few pinches of glitter or fake snow in the jar.
4. Screw the lid on very tightly.

More items...

How to make personalized souvenir snow globes?

How to Make Personalized Souvenir Snow Globes

1. Choose a Photo. Choose a photograph for the project. ...
2. Build the Scene. Use the lid of the jar to build a scene with the laminated photograph, gravel, miniature pool floats and perhaps a blue hot-glue ocean floor.
3. Fill the Jar. Fill your jar with distilled water almost to the top. ...
4. Close & Tighten Lid. Screw the lid on tightly. ...

How do you make a snow globe?

• Giovanny Tarrago, 36, is a Tasker for TaskRabbit who focuses on snow removal in Chicago, Illinois.
• Storms are a challenge, and Tarrago's best practices include staying warm and using a light shovel.
• Here's his story, as told to writer Perri Ormont Blumberg.

How do you make snow globes?

To make a snow globe using household items, start by finding a glass jar with a tight-fitting lid. Next, choose items to put inside, like toys, figurines, or cake-toppers made of plastic or ceramic. Take the lid off the jar and cover the underside with a layer of hot glue, superglue, or epoxy, then build your scene on the underside of the jar ...

What liquid do you use to make a snow globe?

DirectionsPut glue on the inside of the jar's lid. Place and stick your child's plastic figurine on it.Fill the jar with cold water.Add 1-2 teaspoons of glitter and stir.Add a few drops of glycerin.Screw the lid on the jar. You can glue it if you're concerned about your child trying to open it.That's it!

How do you make a snow globe on top of a Mason jar?

Take the top of the mason jar lid off and trace it onto white paper.Cut out the circle and glue it to the lid of the jar on top.Add fake snow to the top of the mason jar lid.Add little miniature figurines and décor to create your own little snow globe scenes.More items...

What is the ratio of glycerin to water for snow globe?

It is important to not fill water all the way to the top! A good ratio is 1 cup of water, 3 teaspoons glycerin, and 3 teaspoons glitter. Glycerin can be substituted for olive oil, vegetable oil, or baby oil.

How do you make liquid snow globes without glycerin?

There are plenty of ways you can substitute glycerin when bringing your homemade snow globes to life. Some glycerin alternatives include light corn syrup, mineral oil, baby oil, or a clear cooking oil. Conversely, you can omit a substitute altogether!

How do you make a jar lid?

DIY Mason Jar LidStep 1: What You'll Need. You'll need: ... Step 2: Cut a Disc and a Wheel. Start by cutting 2 discs using the bigger of the 2 hole saws. ... Step 3: Add the Decorative Touch. ... Step 4: Glue and Sand. ... Step 5: Glue in the Jar Lid. ... Step 6: Sand and Finish.

Can you make a homemade snow globe?

Fill the jar almost to the top with distilled water; add a pinch of glitter and a dash of glycerin to keep the glitter from falling too quickly. (Don't add too much, or the glitter will stick to the bottom of the jar when it's flipped.) Screw on the lid tightly, being careful not to dislodge the figurine.

How do you thicken water in a snow globe?

Fill your mason jar up about 75% with distilled water. Then, add 2-3 drops of glycerin. This will help to thicken the water so the glitter floats slower – but don't overdo it, or it'll be too goopy!

How much baby oil do you put in a snow globe?

Fill the jar three-quarters full with baby oil. Use unscented oil, as scented oils may yellow over time.

What is a substitute for glycerin?

Propylene glycol is a colorless, odorless liquid with similar humectant, or moisturizing, properties to glycerin. Also known as PG, propylene glycol is commonly used as a glycerin substitute in cosmetic and toiletry products because it is typically cheaper.

Can I make a snow globe with just water?

1:346:32DIY Snow Globe | Sea Lemon - YouTubeYouTubeStart of suggested clipEnd of suggested clipWater you can use tap water if you want to but distilled will make your globe a lot more clearMoreWater you can use tap water if you want to but distilled will make your globe a lot more clear because it has no minerals in it I thought the Yeti would look good with some snowballs in the jar.

Do you put oil in a snow globe?

Assemble the Snow Globe Use a glue gun, aquarium sealant, or florist clay to adhere your 'scene' to the inside of the lid. Allow glue to cure the required time before adding liquid. Fill the jar with mineral oil, baby oil, or water. The snow or glitter will fall more slowly in the oil.

How do you seal a snow globe?

Let any excess water dry completely from around the edge of the globe and gasket. Only then seal the edge where the globe and gasket are joined with Silicone Adhesive or E-6000 Adhesive. Once adhesive is thoroughly dry secure the globe to its base using the same adhesive.

How to make a snow globe?

To make a snow globe in a jar, choose a theme and pick a waterproof figure like an angel or snowman as your centerpiece. Next, find a clean, airtight jar and gather waterproof glue, glitter, water and baby oil for your project. Start by gluing your figure to the inside of the top. Let it dry, then fill your jar with water, but leave enough room to add a few drops of baby oil and a couple teaspoons of glitter. All you need to do next is seal the jar and shake! For suggestions on how to make your own figurine, scroll down!

How to make a snow globe for a birthday?

1. Pick a theme. If you want it to be Christmas-related, a snowman or pine tree might work. If it's for a birthday, try a small toy. For a personalized snow globe, try a heavily laminated photo, glued to a cork or another base. Make sure your figure is waterproof and fits on the jar lid and inside the jar.

What do you need to make a snowman?

Most craft stores or general retailers will have anything you don't already have at home. Besides a jar and a figurine, you'll also need: Waterproof craft glue or epoxy. Glitter or fake snow. Bottled water, which is less likely to cloud up.

How to clean a jar of jars?

Wash your jar with hot, soapy water, remove any labels or glue remaining, and make sure it's totally dry before proceeding.

How to seal a glass jar?

Seal the lid. Keeping the glass jar right side up, just place your lid onto the top of the jar, and seal it. If there's any extra water, it might leak a little, but that's okay. Turn it over gently and see if there are any leaks.

How to make a figurine out of a jar?

Model it in different positions and try the jar over top. Once you have found the right pose, apply your adhesive sealant to the bottom of the figurine.

What size jar should I use for spaghetti sauce?

Find a good jar. Any size can work, from a baby food jar to a spaghetti sauce jar to a large mason jar. Make sure there are no cracks and that it can be closed tightly.

How to waterproof a mason jar snow globe?

The hot glue cools really fast on cold glass, so promptly get that ring on. To further waterproof your mason jar snow globe, place hot glue around the edges where the ring and lid meet. Basically, if there was a spot where water could potentially work its way through, I hot glued it closed.

How to make a snow globe with reindeer?

Place the lid on the mason jar, with the tree and reindeer in the water. Hot glue the lid in place. Work quickly to put the ring on the lid. Place hot glue around the edges where the ring and lid meet to further waterproof the snow globe. Wrap the twine around the lid, securing it in place with hot glue.

How to make a bottlebrush tree out of a mason jar?

Cut the bottom 1-inch off of the old plastic cup using the exacto knife. Affix the bottom of the plastic cup to the inside of the lid of the mason jar, creating a small platform . Hot glue the bottlebrush tree to this platform on one side. Check that the mason jar will fit over the tree, just in case.

How to seal a mason jar lid?

Hot glue the lid in place. I used copious amounts of hot glue, again, because I was concerned about potential leakage. Because you’re not sealing the mason jar (boiling it) this is basically the only way to seal the jar. So, lots of hot glue.

How to cut a plastic cup?

Start by cutting the bottom 1-inch off of the old plastic cup using the Exacto knife or box knife. To help guide me in how much to cut and where I drew a line on the cup with a marker. But that’s not necessary–and it won’t really matter. When you’re cutting a cup like that, it’s almost impossible to get it even and straight, but it adds a little relief to the snow globe landscape if it’s not perfectly flat, so it works in the end.

Can you put glitter in a snow globe?

Now it’s time to add glitter to the jar. Don’t go overboard–just a tablespoon or so. Too much and you’ll have a blizzard, but too little and there won’t be any snow in your snow globe at all.

What can you use instead of a jar to make a snow globe necklace?

Instead of using a jar, you can also use a small glass or plastic vial/container to make a snow globe necklace!

How to make a snow globe light up?

You can make a snow globe light up by using a waterproof LED light or by placing a light behind it.

How to make glitter out of baby oil?

Fill the jar with water, glycerin, and glitter. Fill your jar almost to the brim with water and add 2 to 3 teaspoons of glycerin (which can be found in the baking section at the supermarket ). The glycerin "thickens" the water, allowing the glitter to fall more slowly. You can achieve a similar effect with baby oil.

How to make a scene out of a jar?

Create the scene on the underside of the jar lid. Take the lid of your jar and cover the underside with a layer of hot glue, super glue or epoxy. If you like, you can sand the lid with some sandpaper first - this will create a rougher surface which helps the glue to stick better.

How to get labels off of jars?

Wash the jars inside and out. If you're having trouble removing the label, try rubbing it with hot soapy water and using a plastic card or knife to scrape it off. Dry thoroughly.

What can you add to water to make it look more like water?

Add glitter, beads, or other small items to the water. Anything will work so long as the objects don't interfere with your main object!

What to do with a jingle bell?

You can paint it a bright color, wrap a decorative ribbon around it, cover it in felt, or stick festive berries , holly or jingle bells to it.

What to do with a Mason Jar snow globe?

Mason jar snow globes are fun to make for yourself but also make great gifts. Use them as hostess gifts for holiday parties or as birthday presents.

What to make with Easter bunnies?

Make an Easter globe with bunnies and eggs or a Halloween decoration with pumpkins and ghosts.

What glue is used to make a snow globe?

The addition of clear Elmer’s Glue to the water within the jar is the key ingredient for making a tranquil jar snow globe. Because the glitter has a greater viscosity than water, it takes longer to settle.

What is the water in a snow globe?

Water. At room temperature, some snow globes are filled with clear water. Distilled water is used in certain globes. Condensation will form on the interior and outside of the globe if the water is excessively hot or cold.

Is it possible to create a snow globe using hot glue?

Use superglue or hot glue to adhere your trees or other decorative objects on the inside of the lid with the assistance of an adult. Allow to dry. The cover should be firmly screwed on. Watch the snow fall inside your handmade DIY snow globe by turning the jar upside-down.

Is reusing baby food jars a good idea?

You may also just cap them and save them for later use after the youngsters have finished with them (considering the paint is still usable). Glass jars, on the other hand, should not be frozen since they may shatter.

Is it possible to recycle the lids of baby food jars?

Metal lids may be removed and thrown away in the trash. Glass bottle and jar plastic lids and caps should be discarded.

Is it safe to light candles in baby food jars?

I’ve created candles out of baby food jars before. They make excellent little candles. I also painted the smaller jars and used them for votive candles; this is a fun project to do with kids.

How do you spray paint the lids of baby food jars?

Glue a plastic toy to the lid of a baby food jar using a glue gun or E-6000.

Step 1: Materials Needed

The materials that are needed for this project include a mason jar, super glue, glitter, mini Christmas trees, water, and glycerin. I used Gorilla Glue Precision Glue Pen, and it worked great.

Step 2: Soak Christmas Trees

Fill a bowl or jar with water and place trees into the water to soak overnight. Doing this ensures that the water in the final snow globe will be clear and not tinted with the color on the trees.

Step 3: Dry

Set the trees out on a paper towel to dry so that any left over dye will seep into the paper towel.

Step 4: Stuck Like Glue

Squirt glue onto the bottom of the Christmas trees. Place the trees on the inside of the jar's lid. Then, press down on the base of the tree to make sure that the tree is completely stuck to the lid. Let the glue dry for one hour.

Step 5: Wet N Wild

Fill the jar up with water until you are about one inch from the top. Then, add about 2 tablespoons of glycerin. Lastly, stir glycerin so it blends evenly throughout the water.

Step 6: The Best Part: Glitter!

Pour enough glitter in the water and glycerin mixture so that it covers the visible surface of water. Add as much glitter as your heart desires, but do not add too much, though, or the Christmas trees will not be very noticeable. Stir glitter around to help it sink in.

Step 7: Last Step!

Gently set the lid with trees attached onto the jar to see how much room is left. Then, top fill the remaining space with water. Lastly, tighten down with outer ring. After securing the lid tightly, flip the jar over and enjoy!