To make a long-lasting elastic bracelet, follow these other tips:
- Stretch your cord before stringing any beads. Your bracelet will stay the right size and won't stretch out leaving gaps between the beads.
- Make your bracelet the correct size. ...
- Tie your knot with some tension in the bracelet. ...
- Tighten your knot from all sides. ...
- After cutting the elastic cord, add a dab of glue to the knot. ...
- If possible, cover your knot. ...
- Cut the elastic to length.
- Prestretch the elastic cord.
- Secure the end of the cord.
- Lay out your beads.
- String the beads onto the cord.
- Tie a knot to secure the beading cord.
How to fix stretch elastic bead bracelets?
- Stretch your cord before stringing any beads. Your bracelet will stay the right size and won't stretch out leaving gaps between the beads.
- Make your bracelet the correct size. ...
- Tie your knot with some tension in the bracelet. ...
- Tighten your knot from all sides. ...
- After cutting the elastic cord, add a dab of glue to the knot. ...
- If possible, cover your knot. ...
Is it possible to shorten an elastic bead bracelet?
Here are some ways that you can shorten the length of your bracelet. Although, Slide the elastic band down the excess material until the bracelet is the right size, Then poke the needle back into the row of beads, Open the links and remove the two unwanted links to shorten, but that is not something I would personally attempt.
How to make a bracelet with stretch cord?
GET THE PASSWORD HERE!
- STRING LETTER BEADS. Thread your letter beads on your cord first. ...
- SIZE THE STRETCH BRACELET. Have someone else wrap the bracelet carefully around the wearer's wrist. ...
- TIE BRACELET KNOT. Time to tie your elastic cord into a knot. ...
- TRIM AND GLUE KNOT. ...
- PUT KNOT INSIDE CRIMP COVER. ...
- CLOSE CRIMP COVER WITH PLIERS. ...
How to make beaded bracelets with elastic?
Method 2 Method 2 of 4: Making a Stretchy Bracelet
- Gather your supplies. Stretchy bracelets are the easiest to make, and require the fewest tools. ...
- Measure your wrist and cut the elastic a little bit longer. Take the beading elastic and wrap it one and a half times around your wrist.
- Stretch the elastic. ...
- Fold some tape over one of the ends of the elastic. ...
- Put the beads onto the elastic. ...
What is the best material to use for stretch bracelets?
Create Homemade Accessories with the Best Elastic String for Jewelry MakingStretch Magic Beading Cord. This super-sturdy, 1-millimeter spandex cord comes on a 16-foot roll. ... Beadaholique Beadsmith Opelon Elastic White Beading Cord. ... Darice Elastic Cord. ... Mandala Crafts Elastic Cord. ... Beadnova Crystal String Cord.
What size beads for stretch bracelet?
The 0.8mm size is the best bet for most beads. Use the 1mm cord size if you know the holes on your beads is large enough. About 22 8mm beads to string on the cord.
What is the average length of a stretch bracelet?
And when it comes to deciding how long to make a stretch bracelet, a small adult size is 7″, medium is 7.5″ to 8″, large is 9″, and plus size is 9.5″.
How many inches should an elastic bracelet be?
For children, use 6 to 8 inches of elastic cord, depending on the size of the child's wrist. For adults, use 10 to 12 inches of elastic cord, depending on whether the bracelet is for a smaller or larger wrist.
How many 6mm beads are in a stretch bracelet?
How many Beads do I need for my project?Bead Size7 inch Bracelet7.5 inch Bracelet4mm44 beads48 beads6mm30 beads32 beads8mm22 beads24 beads10mm18 beads19 beads2 more rows
What size stretch Magic should I use?
Some general guidelines: Use 0.5mm Stretch Magic for 3mm crystal bicone beads. Use 0.7mm Stretch Magic for 4mm crystal bicones and tiny glass seed beads. Use 1mm Stretch Magic for 5mm and larger crystal beads, gemstones and most Czech glass beads.
How do I choose a beaded cord size?
The size stretch cord needed for a project mostly depends on the size of the beads you are using and the diameter of the bead hole. Usually, the larger the bead the thicker diameter of stretch cord. Most beads have at least a 1mm hole that easily accommodates the 0.8mm or 1mm stretch cords.
How do you size a bead bracelet?
Measure around the wrist at the wrist bone. Choose a place where you would normally wear a bracelet....How to Measure for Bracelet SizeAdd 1/4 to 1/2 inch for a snug fit.Add 3/4 to 1 inch for a comfortable fit.Add about 1-1/4 inch for a loose fit.
How to make a beaded bracelet with elastic cord?from thesprucecrafts.com
Tighten your knot from all side s. Pull the top two ends to tighten the knot, pull from the beaded side, pull the left loose end and the right beaded end and vice versa. After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well.
How to care for elastic bracelets?from thesprucecrafts.com
Follow these tips to make them last: Always put your elastic bracelet on the right way . This is one of the main factors in bracelets that don't last. Never put on your bracelet by stretching it over your hand. As much as possible, roll it over your hand ...
How to make a magic bracelet with a string?from themakeyourownzone.com
Cut a 12" length of the Stretch Magic cord. Prestretch the cord by holding one end of the cord and pulling it between the thumb and forefinger of your other hand, to gently stretch it. Pull and gently stretch it like this three or four times. Begin stringing your beads.
What glue to use to make elastic cord?from thesprucecrafts.com
After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well. Some people think that super glue can erode the elastic over time. E6000 stays flexible so it is probably a better choice.
Why are elastic bracelets so popular?from thesprucecrafts.com
Fashion trends come and go, but elastic bracelets remain popular because they are versatile and easy to wear. They are also easy to make, and they can last for a long time if you follow these tips. Start by making your stretch bead bracelets with good quality elastic cord meant for jewelry making. Do not buy an elastic cord meant ...
How to keep beads from falling off a spool?from thesprucecrafts.com
String your beads on the elastic while it is on the spool, or use a bead stopper to avoid having the beads slip off the cord.
How to tie a knot on a bracelet?from thesprucecrafts.com
Tie your knot with some tension in the bracelet. In other words, pull the elastic so it is taut and just a little stretched when adding the second half of the knot. The extra tension from the inside helps keep the knot from untying.
How to make a beaded bracelet with elastic cord?from thesprucecrafts.com
Tighten your knot from all side s. Pull the top two ends to tighten the knot, pull from the beaded side, pull the left loose end and the right beaded end and vice versa. After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well.
How to care for elastic bracelets?from thesprucecrafts.com
Follow these tips to make them last: Always put your elastic bracelet on the right way . This is one of the main factors in bracelets that don't last. Never put on your bracelet by stretching it over your hand. As much as possible, roll it over your hand ...
How to make a magic bracelet with a string?from themakeyourownzone.com
Cut a 12" length of the Stretch Magic cord. Prestretch the cord by holding one end of the cord and pulling it between the thumb and forefinger of your other hand, to gently stretch it. Pull and gently stretch it like this three or four times. Begin stringing your beads.
What glue to use to make elastic cord?from thesprucecrafts.com
After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well. Some people think that super glue can erode the elastic over time. E6000 stays flexible so it is probably a better choice.
Why are elastic bracelets so popular?from thesprucecrafts.com
Fashion trends come and go, but elastic bracelets remain popular because they are versatile and easy to wear. They are also easy to make, and they can last for a long time if you follow these tips. Start by making your stretch bead bracelets with good quality elastic cord meant for jewelry making. Do not buy an elastic cord meant ...
How to keep beads from falling off a spool?from thesprucecrafts.com
String your beads on the elastic while it is on the spool, or use a bead stopper to avoid having the beads slip off the cord.
How to tie a knot on a bracelet?from thesprucecrafts.com
Tie your knot with some tension in the bracelet. In other words, pull the elastic so it is taut and just a little stretched when adding the second half of the knot. The extra tension from the inside helps keep the knot from untying.
What size cord should I use for stretch bracelets?
Many people also wonder what the best cord is for making stretch bracelets and I’ve found that the Stretch Magic cord in the .7mm size is a very good all-purpose cord for stringing these bracelets. But before starting to string your bracelet on your stretch cord, give it a “pre-stretch”!
What size stretch bracelet should I use for a small adult?
And when it comes to deciding how long to make a stretch bracelet, a small adult size is 7″, medium is 7.5″ to 8″, large is 9″, and plus size is 9.5″. I have tiny wrists so I usually do a 7″ size.
How to make a magic bracelet with a string?
Cut a 12" length of the Stretch Magic cord. Prestretch the cord by holding one end of the cord and pulling it between the thumb and forefinger of your other hand, to gently stretch it. Pull and gently stretch it like this three or four times. Begin stringing your beads.
How to make a knot stronger?
Then pull the knot tight as usual. This gives you a knot that’s more durable. #6 – Reinforce the Knot With Clear Nail Polish.
How to do a surgeon's knot?
This knot is done by making the first half of the knot as usual, and when doing the second half of the knot, pass the end of the cord under and through one additional time. Then pull the cord tight to finish the knot.
Is it hard to make stretch bracelets?
Once again, making stretch bracelets is not that hard. However as with most DIY projects, I’ve learned that having some helpful tools and knowing a few little handy tricks makes the project more enjoyable. Here are six tips I’ve found helpful to know as you complete the steps to make your own stretch bracelets:
Can you make stretch bracelets with cord?
When it comes to making your own jewelry, DIY stretch cord bracelets are probably one of the easier things you can make. After all, even little kids can string beads onto some cord, right? So true – BUT – I’ve learned that there are a few little tools, tips, and tricks that make the whole process go a little more smoothly and give you a finished homemade stretch bracelet you can enjoy.
How to hide a knot in a bracelet?
If you want to hide your knot, you’ll also need 1 bead with a larger hole to be strung first. Step 2 – when all of your beads are strung, test the size around your wrist. If the size feels good, tie a knot, pulling securely. Make sure not to pull too tightly, you don’t want to take out all the stretch.
How to make a charm with beads?
A meaningful charm or tassel, and findings to connect it to the cord. Step 1 – Cut 11” of stretch cord. (Tip: if you use a bit of adhesive along the end and then cut a touch off at an angle, you will have a easier time stringing your beads). Begin stringing your beads. You will use approximately 22 8mm round beads.
How to make a bracelet with beads?
String all of the beads for your bracelet. Check the length occasionally by wrapping the strung beads around your wrist. Be sure to leave a little space between your skin and the bracelet, so that you can roll it over your wrist without breaking the stretch cord. This also helps to ensure that no empty areas show through. Make sure that the last bead you string has a hole large enough to hide a knot in your beading cord.
How to knot a bracelet without losing tension?
If you do lose tension, try pulling both ends of the cord away from each other to take up some slack. After completing a few bracelets, this should become much easier.
How to tie a bead stopper?
Remove the bead stopper and the needle from the elastic cord, and then bring both ends together. Carefully make the first half of a square knot, gently pulling the cord ends to remove slack in the bracelet. While holding the first half of the knot in place, tie the second part of the knot and pull firmly to secure.
How to string beads without a needle?
Unless your beads are large enough to string without a needle, thread a collapsible eye or big-eye needle onto the other end of the stretch cord and fold over a two-inch tail. This step is optional if you're using beads with very large holes; in that case, you can often string them directly onto the cord.
How to pull a knot from a bead?
With the glue still tacky, hold the cord between two beads about an inch away from the knot, and tug gently to pull the knot inside of the adjacent bead.
What is the fastest drying glue for bracelets?
You may prefer to use something more slow-drying like E6000 and then simply allow them to dry before wearing your bracelet.
What to look for when selecting beads?
Choosing Beads. When selecting beads, look for ones that are lightweight and don't have sharp edges around the holes to avoid cutting or wearing away the elastic cord. Seed beads work well because their small size makes them lightweight and most have smooth holes. You can also use plastic beads, including vintage Lucite beads, pony (kanji) beads, ...
How long should I cut an elastic cord for a bracelet?
Cut a length 12 inches of your .8mm elastic cord. Don't worry, your bracelet will be much shorter, but I've found it's much easier to string beads (especially for kids) if they have some extra room on their string as they bead.
When to tie up a bracelet?
You're ready to tie up your bracelet when there's a space that's the size of one bead, which will be your crimp cover. In a regular bracelet, you'll need to leave a larger gap, but not with these stretchy bracelets.
How to keep beads from falling off of string?
To keep the beads from falling off the string, start with a small piece of tape at one end of the cord. String the beads in the middle first and then add the colorful seed beads evenly to one side. Carefully remove the tape, place tape on the beaded end, and then bead the other end.
What glue to use on elastic cord?
3. Super fast drying glue. This is for your knot, and works great with this kind of elastic cord. Only the tiniest drop is necessary! I used Gorilla Super Glue from Amazon here. You can also use Krazy Glue, nail glue, or Super Glue.
How thick is a letter bead cord?
1. Elastic bead cord. I bought a 2 pack of this cord with a White and Black spool from Amazon here. Just the White spool is sold separately here. This cord is .8mm thick, which is an ideal cord for most letter bead projects.
Can stretchy bracelets break?
Whether you want to make stretchy bracelets to wear yourself, or your kids want to make them as an easy summer craft, there is a super simple way to make stretchy bracelets that will last and won't break !
Can you use Gorilla Super glue on jewelry?
I used Gorilla Super Glue, which you can get here on Amazon, but you can use any kind of fast drying glue that is more liquid-y than goopy. ( Yes , those are professional jewelry making terms.)
What do you need to make a stretch bracelet?
Things You'll Need. Elastic cord. Beads. Super glue or jewelry glue. Scissors. Binder clip. Stretch bracelets are a fun craft activity and make attractive, easy-to-wear jewelry. Stretch bracelets are easy to take on and off. They're perfect for children or those with arthritis as they don't require a troublesome clasp.
How to stretch elastic cord?
Pull on the cord, stretching it out several times to ensure the elastic cord does not stretch out immediately and will be durable, This will cause the cord to "give" and take out any extra stretch.
How to make a bracelet for a child?
Step 1. Determine the length for the bracelet. For children, use 6 to 8 inches of elastic cord, depending on the size of the child's wrist. For adults, use 10 to 12 inches of elastic cord, depending on whether the bracelet is for a smaller or larger wrist. Cut the elastic stretch cord.
How far apart should you trim elastic cord?
Trim the ends of the elastic cord 1/8 of an inch from the end, leaving enough of each end of the elastic so that the knots do not come undone.
How to make a surgeon's knot?
Remove the bead stopper or binder clip carefully and grasp both ends of the cord when all of the beads are on the elastic cord. Make a surgeon's knot by wrapping or lacing the two ends of the cord over one another so the elastic cord looks doubled, almost braided. Pull the cord snug and tie a knot.
What is elastic bracelet?
Using elastic for bracelets takes away the learning curve that advanced beading wire, cord and fiber require. Elastic is the perfect bead stringing cord for a beginner and it is wonderful for a quick jewelry design.
What is the best stretchy cord for jewelry?
We think Stretch Magic is one of the best stretchy cords out there for jewelry making.
What do you need to start out with stretchy cord?
All a beginner needs to start out with stretchy cord is some beads, scissors or a bead nipper, and some glue and they have everything necessary for a jewelry design. An accomplished beader will have fun creating a quick design with stretchy string.
How to hide a knot in a bead?
One way is to use beads with larger holes. Simply move the knot so it rests inside a bead. If you are determined to make sure the knot stays, you can glue it in place - but that might cost you a bead in the long run. Another option is to use spacers with large holes. You can hide the knot inside a spacer, if your beads have smaller holes, your knot will never move. Another fun way to finish a design is to use a bail with a large hole. You can conceal the knot in the bail and then add a fabulous dangle to your jewelry design.
How thick is a 7mm cord?
.7mm is .027 inches, or between 1/64 - 1/32" thick. This diameter is great as an all purpose bead stringing cord. Most bead sizes will fit comfortably on this cord. Keep this stocked in your beading toolkit as your go-to diameter for every day beading.
What is stretch cord?
Stretch cord is simple to use and incredibly cost effective. Stretch Magic is perfect for beaded bracelets for men, children's crafts, aromatherapy bracelets using essential oils, and so much more. You are going to be amazed by how easy it is to use this cord for beading bracelets and funky jewelry.
How thick is stretch magic?
Stretch Magic 1mm. 1mm is .039 inches, or slightly over 1/32" thick. This diameter is great for larger beads and gemstones. It is strong and durable. If you are using a chunky, abrasive bead, like Turquoise, glass, or coral, you may want to consider using a bead stringing wire as they can tear into the elastic cord.
How to tie a bracelet with elastic?from thesprucecrafts.com
Cut a piece of cord the size of your bracelet, plus leave yourself at least three inches of elastic on each side to tie your knots. The cord is slippery and nothing is worse than having everything exactly like you want it, and then dropping the end during tying.
How to make a beaded bracelet with elastic cord?from thesprucecrafts.com
Tighten your knot from all side s. Pull the top two ends to tighten the knot, pull from the beaded side, pull the left loose end and the right beaded end and vice versa. After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well.
How to make a magic bracelet with a string?from themakeyourownzone.com
Cut a 12" length of the Stretch Magic cord. Prestretch the cord by holding one end of the cord and pulling it between the thumb and forefinger of your other hand, to gently stretch it. Pull and gently stretch it like this three or four times. Begin stringing your beads.
How to string beads on elastic?from thesprucecrafts.com
String your beads on the elastic while it is on the spool, or use a bead stopper to avoid having the beads slip off the cord. Pre-stretch your cord by pulling on each end before stringing. This is a really important step. 02 of 04.
What glue to use to make elastic cord?from thesprucecrafts.com
After cutting the elastic cord, add a dab of glue to the knot. Super glue or E6000 jewelry glue are two that work well. Some people think that super glue can erode the elastic over time. E6000 stays flexible so it is probably a better choice.
Why are elastic bracelets so popular?from thesprucecrafts.com
Fashion trends come and go, but elastic bracelets remain popular because they are versatile and easy to wear. They are also easy to make, and they can last for a long time if you follow these tips. Start by making your stretch bead bracelets with good quality elastic cord meant for jewelry making. Do not buy an elastic cord meant ...
How to keep beads from falling off a spool?from thesprucecrafts.com
String your beads on the elastic while it is on the spool, or use a bead stopper to avoid having the beads slip off the cord.
