how do you make a triple star with rubber bands

How to Make a Triple Star Out of Rubber Bands

Full Answer

How do you make a star with a rubber band?

All you need is a sturdy rubber band a little bit of patience. Once you get a single star down, try making a star within a star to up the ante a bit. Place a sturdy rubber band over your left thumb and index finger. Put the rubber band near the end of your fingers and stretch your fingers out slightly so the rubber band stays taut.

How do you do a double star?

The double star is a continuation of the single star, so get your hands in position with your left index finger, left thumb, left pinkie, right index finger, and right middle finger each holding a point of the star. [6] You will need a long rubber band that's not too wide.

How do I stretch the rubber band?

Place your index finger and thumb inside the rubber band to see how far it stretches. - The following steps are for people who are holding the rubber band with their right hand ( right handed ). If you are holding the rubber band with your left hand ( left handed ), replace each of the following right with left and each left with right.

How do you make a star with your fingers?

Twist your middle finger through the center loop of the bottom and pull to the left. You now have your first star. (In this position the thumb, index finger and pinky of your right hand will be holding the top three points of the star, while the index and middle finger from your left hand will be holding down the bottom two points of the star.)

How to make a triangle with a rubber band?

How to make a star out of a triangle?

How to make a star in your left hand?

How to put rubber band on thumb?

What finger is holding the star?

What is the purpose of rubber bands?

Where to put loops on a sleeve?

See 4 more

About this website

How do I make a star with a rubber band?

0:211:29How To Make A Star With A Rubber Band-Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd place it around your index finger. And around your thumb stretch it out a little bit. So you getMoreAnd place it around your index finger. And around your thumb stretch it out a little bit. So you get some slack right here.

How do you make a double star with a rubber band?

0:131:58How To Make A Double Star With A Rubber Band-Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd to transfer to the double star is actually pretty easy. So we're going to do is we're going toMoreAnd to transfer to the double star is actually pretty easy. So we're going to do is we're going to drop the pinky out and the thumb. Out we have this symbol.

How do you make a rubber band jump from one finger to another?

0:312:02How to Do the Jumping Rubber Band Trick | Card Tricks - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen you say you're going to make the rubberband jump from one side to the other what you actuallyMoreWhen you say you're going to make the rubberband jump from one side to the other what you actually do is you pull this down and put all your fingers inside this loop except for the thumb.

How do you do the rubber band trick?

1:4212:5310 SIMPLE Rubber Band Magic Tricks Anyone Can Do | RevealedYouTubeStart of suggested clipEnd of suggested clipAnd the band spins around your first finger if you're looking to learn some of the best magic tricksMoreAnd the band spins around your first finger if you're looking to learn some of the best magic tricks ever created then check out my book mind-blowing magic tricks for everyone.

How do you make a rubber band ball?

First, take about ten rubber bands and wad them into a ball. Next, wrap the wad of rubber bands together with another rubber band, so that they're all together. Start wrapping other rubber bands around your wad of bands. This will help to start forming the rubber band ball.

How do you do rubber band trick on Tiktok?

4:375:29HOW TO DO VIRAL RUBBER BAND MAGIC (TikTok Magic) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat excess from the bottom. And as you slowly release. The ring is gonna look like it's moving upMoreThat excess from the bottom. And as you slowly release. The ring is gonna look like it's moving up but all you're doing is you're letting go more and more of.

How do you do the hair tie trick with jeans?

How to button jeans/pants that are too tight:Use a hair elastic that closely matches the color of your pants and loop it around your button.Thread the hair elastic through the buttonhole.Loop the elastic back over the button and secure.

How do you make rubber band bracelets?

0:045:425 Easy Rainbow Loom Bracelet Designs without a Loom - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd one band on the left loop the next band. On then pull both bottom bands on the right over theMoreAnd one band on the left loop the next band. On then pull both bottom bands on the right over the top one push the band down to make room for more bands. Go in with a new band.

How do you make a rubber band go through your arm?

1:384:20AMAZING Rubber Band Through Hand - Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo all you have to do is just release your thumb. And it jumps so one more time you have the rubberMoreSo all you have to do is just release your thumb. And it jumps so one more time you have the rubber band on you're going to twist.

How do you pass rubber bands to each other?

4:526:39CRAZY RUBBER BAND TRICK - Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou are going here the rubber band is going through your middle finger. And then you put your indexMoreYou are going here the rubber band is going through your middle finger. And then you put your index finger inside. And then you keep on doing this move the move is supposed to look like this.

How do you spin hair ties?

0:070:53How To Spin A Rubber Band On Your Finger (Super Easy) - YouTubeYouTubeStart of suggested clipEnd of suggested clipPutting in between your middle finger and your something like this then boarding your pointer fingerMorePutting in between your middle finger and your something like this then boarding your pointer finger under and over like this then you release your thumb.

How do you make a spider launcher?

Learn more. ... Gather your materials!Cut the construction paper to fit the tube. ... Glue the lollipop sticks around the outside of the tube, creating a square. ... Stretch one rubber band around all four posts. ... Push down the first rubber band. ... Stretch the first rubber band up and over the second on each post.More items...

How do you make a paper star?

InstructionsMake a Loop in the Paper. The basic shape of the star is created by making a 'knot' out at one end of the strip of paper and flattening this to give a pentagon shape. ... Complete the Knot. ... Start Folding. ... Keep Folding the Paper. ... Squeeze the Star Into Shape.

How do you make a hot air balloon out of rubber bands?

Take one part of the loop from the little finger and put it on the thumb and do vice versa. Hold the middle part with right hands index finger and release all loops of thumb and little finger. Insert all fingers on the loop of middle finger, stretch it, and you are done.

What can you make with rubber bands?

What can I do with a lot of rubber bands?Make a ball.Rubber band gun.Make a spider launcher.Toilet paper roll kazoo.Make a homemade guitar.Tie-dye something.DIY rubber band bracelet kit.Make a slingshot. This is the best elastic for homemade slingshots.More items...•

How do you make a butterfly out of rubber bands?

1:052:10How To Make A Butterfly With A Rubber Band-Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis has been twisted. Okay now i'm going to take my middle finger grab on to this that my pinky isMoreThis has been twisted. Okay now i'm going to take my middle finger grab on to this that my pinky is holding. Take my index finger grab onto this that my thumb is holding. Okay just like this. Okay.

Triple Star Rubber Band Trick « Wonder How To

How To: Watch Apple TV+ on Any Android Phone or Tablet ; How To: 23 Big iPhone Features and Improvements on iOS 16.1 ; How To: Open Your iPhone's App Library Faster from Your Home Screen or Anywhere Else ; How To: 19 Harry Potter Spells Your Android Phone Can Cast Using Google Assistant ; How To: Your iPhone Has a Hidden Text-to-Speech Tool That'll Read Articles, Books, News, and Other Text ...

The Incredible Jumping Rubber Bands : 7 Steps - Instructables

The Incredible Jumping Rubber Bands: Everyone enjoys a good magic trick, so I present to you the Incredible Jumping Rubber Band Trick. This trick involves a rubber band that gets wrapped around two fingers. By doing nothing more than lifting your fingers, the rubber band appears to in…

How to Make a Double Star With a Rubber Band!!! - Instructables

How to Make a Double Star With a Rubber Band!!!: When I was younger, I used to play with rubber bands whenever I had to go on those long car rides. Learning how to create rubber band designs was one way for me to kill time and boredom. Hopefully, this can do the same for you whether you are a kid …

How to make a star with a band?

Grab the right side of the band between your 2 index fingers. Insert your right middle finger up through the loop that's over your pinkie. Grab the band that's just to the left and pull it out below. Stretch out your fingers to make the final star!

How to make a teardrop shaped band?

Twist the loop over itself and hook it on your pinkie. Use your right hand to twist the band you just pulled out to the right over itself. It should make a little teardrop-shaped loop that you can hook over your pinkie. You should now have a triangle shape stretched between your index finger, thumb, and pinkie.

How to make a triangle shape with your fingers?

As you do, you'll have a triangle shape with a loop over the right index finger and a loop over the middle index finger. Place the right index finger loop over your left thumb and the right middle finger loop over the left pinkie. Pull your right fingers out of the loops. 3.

How to get a rubber band out of your thumb?

Take a sturdy rubber band and place it over your left thumb and index finger. Stretch it out slightly so it's taut. When holding your palm toward you, you'll see 2 bands. Push your right index finger underneath the first one and hook your finger over the second band to pull it out.

How to wear a band with a left index finger?

Grab the bottom of the loop near your index finger. Use your right index finger and middle finger and grab the band the runs directly in front of your left index finger. It's technically the bottom part of the loop going over the index finger. Insert your fingers in it from the top but with your finger pads pointing up.

How to put rubber band on pinkie?

Insert your right index finger near the inside of your left thumb in the loop made by the rubber band, going down as you do. Go up through the middle triangle (with the thumb loop over your finger) to grab the band that's between your left index finger and your pinkie.

How to make a rubber band for a syringe?

1. Place a sturdy rubber band over your left thumb and index finger. Put the rubber band near the end of your fingers and stretch your fingers out slightly so the rubber band stays taut. Turn your hand so that your palm is facing you.

How to make a double star with rubber band?

Anyone can do it and all you need is a rubber band and your hands! 1. Make sure the rubber band is able to stretch far enough. a. Place your index finger and thumb inside the rubber band to see how far it stretches.

What hand do you hold rubber bands on?

If you are holding the rubber band with your left hand ( left handed ), replace each of the following right with left and each left with right. - Right refers to the fingers on the right hand and left refers to the fingers on the left hand.) Ask Question.

Step 2: Place Your Index Finger

Place your index finger over and under the rubber band, see the picture.

Step 10: Release

Release the top strand of the rubber band on the top most of your index finger.

Step 11: Almost Done!

Get your ring finger moving and reach for the strand just below your thumb.

Step 12: Done!

Place your middle finger beside of your index finger and pull the strand in the middle outward.

How to make a triangle with a rubber band?

Pull and twist the left side of the triangle using the index and middle finger of your left hand. Stretch the rubber band down to the right diagonally and place the index finger of your left hand through the gap between your thumb and pinky on your right hand. Also stretch the middle finger down to the left diagonally and place it through ...

How to make a star out of a triangle?

Pull the top piece of the triangle with the index finger of your left hand. Move it under the right side if the triangle and through the left side of the triangle. Stretch your left index finger diagonally down toward the right so that the elastic is stretched fairly tightly. Insert the middle finger of your left hand into the bottom left loop in the elastic. Twist your middle finger through the center loop of the bottom and pull to the left. You now have your first star. (In this position the thumb, index finger and pinky of your right hand will be holding the top three points of the star, while the index and middle finger from your left hand will be holding down the bottom two points of the star.)

How to make a star in your left hand?

Using your thumb on your left hand, twist the small center triangle which exists between your index and middle fingers of your left hand over itself. Release your thumb and pull down with your left hand. You will now see two stars--one smaller one inside a larger one. Advertisement.

How to put rubber band on thumb?

Place your right hand index finger and thumb through the rubber band. Allow the rubber band to rest on the top of your thumb and index finger so that it is in a loose oval shape.

What finger is holding the star?

You now have your first star. (In this position the thumb, index finger and pinky of your right hand will be holding the top three points of the star, while the index and middle finger from your left hand will be holding down the bottom two points of the star.) Advertisement.

What is the purpose of rubber bands?

The elasticity of a rubber band allows it to be a functional tool for holding items together. Rubber bands can also be quite useful in craft making. Some people like to stretch rubber bands into various shapes. One such shape is a rubber band star.

Where to put loops on a sleeve?

Place the loops which are around the middle and index fingers of your left hand on the pinky and thumb of your right hand respectively.