how do you make a washer game set

Full Answer

How to make a washer toss game set?

DIY Washer Toss Game Set Instructions. 1 Step 1. Cut the 2x4s and plywood to size and sand them smooth. For each box, position four 2x4s (two 16-inch lengths and two 13-inch lengths) on a ... 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items

How do you make a washer board game?

To build a washer game, start by determining which playing style you’re building the game for, like 3-hole boards or 1-hole boxes. Then, cut 4 pieces of 2-by-4’s and screw the corners together to create a square frame.

What is the game washers?

Washers, also known as washer toss, is a fun yard game similar to horseshoes where 2 or 4 players compete to throw washers into a box. If the washer lands in the cup or hole in the middle of the box, they get more points. Washers is an easy game to learn in an afternoon and doesn’t require too much space.

What is the size of the washer holes in washer game?

The hole that’s the closest carries 1 point, the one in the middle carries 3 points and the farthest one a total of 5 points. When it comes to the size of the washers, their measurements are 1”x 2 ½ “x ⅛ “. Washer game is super easy to build.

How do you build a washer game?

0:269:21How To Build A Washer Toss Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three andMoreSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three and a half inches on my table saw to simplify things you could also just use a 2 by. 4.

What are the dimensions for washers game?

16 by 16 by 4 inchesWasher pits and boxes vary in size and shape, but a standard for one-hole washers is 16 by 16 by 4 inches (410 mm × 410 mm × 100 mm), with a cylindrically-shaped cup ( 41⁄2 in [110 mm] in diameter and 5 in [130 mm] in height) located in its upper surface.

How do you make a washer toss scoreboard?

0:223:21How To Build a Cornhole Scoreboard | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe scoreboard is really simple to put together and it's only made of a few pieces. For the frontMoreThe scoreboard is really simple to put together and it's only made of a few pieces. For the front and back we're using two sheets of one it one foot by 42 inch plywood.

How far apart are boards for washer game?

20 feetGame Setup: Find a flat open space and place the two washer targets 20 feet from each other (about 7 paces). This distance can be changed based on player ability and desired speed of play. Games can be played 1 vs 1 or teams of 2 vs 2.

How many washers do you need for the washer game?

TOSSING TALLIES Similar to cornhole, the game is played in rounds until one team reaches 21 points. Points are scored based on how close to the cup or hole the washers are thrown. Once all eight washers are tossed, the points from the round are added together.

How far apart are 3 hole washer boards?

Place the boards horizontal to each other so that all of the holes form a straight line. Separate the boards so that there is a 10-foot distance between the front edges of the boards. Players must toss their washers with both feet on the washer board.

How do you make a 3 hole washer toss game?

Playing with one person teams: Each player throws their washers from the same side over to the opposite board (facing longways). The player who throws first will throw all four washers, then the second player throws their washers. The goal is that the washer lands. in the large holes Ton the board.

How do you make a score board?

0:5812:24How to make a large Bluetooth scoreboard | I Like To Make StuffYouTubeStart of suggested clipEnd of suggested clipI. Cut it down to size on the table saw and then I started marking out where everything would be IMoreI. Cut it down to size on the table saw and then I started marking out where everything would be I made a two inch border on all of the sides. Using this large t-square.

What are the rules to washer toss?

A washer is allowed to bounce into the box. If a washer lands and stays on the edge of the box, the throwing player automatically wins the game. The game can be played where a player or team must land on 21 points exactly to win. If a player or team goes over 21 points, they go back to 15 points.

How large is the cup in the center of an official washer toss game?

The game field consists of two washer pits, each containing one recessed cup of 4 inches in diameter. The distance from the cup centers is 25 feet. Each player throws three washers toward the opposite cup.

What are the rules for playing washers?

2:052:58How To Play Washer Toss - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe game a washer is allowed to bounce into the box. If a washer lands and stays on the edge of theMoreThe game a washer is allowed to bounce into the box. If a washer lands and stays on the edge of the box the throwing player automatically wins the game the game can be played where a player or team

What are the rules for pitching washers?

When playing a game of washer toss, players stand directly next to the box. Your foot should be in line with the cup inside the box. To determine who will “pitch” first, both players will line up and pitch a washer at the opposite box. Whoever gets closer to the box will be the first to toss; this is called the diddle.

How to make a splash of color on washers?

If you’d prefer a splash of color, use spray paint. Bring your washers out, too, and paint them, four of one color and four of another color. Another option is to mark them with different designs in permanent marker. Have the kids come up with something creative.

How many points do you get in a washer game?

Scoring takes place after all eight washers have been tossed. Only one team scores per round. One point is awarded for each washer inside the box, and three points for each washer inside the cup. If Player A lands two in the box (2 points) and Player B tosses one in the cup and one in the box (4 points), Player B’s team scores two points (the difference between each player’s total). The team that scored last tosses first in subsequent rounds. The first team to reach 21 points wins. If luck is on your side, and you manage to land a washer on top of one of the box edges, you automatically win the game!

How to cut a carpet into squares?

Cut the carpet into two 13x13-inch squares. Flip them over and draw lines from corner to corner to help you find the center. Position the PVC coupler in the center (about 4¼ inches from each carpet edge) and trace the outside and inside edges.

How to make a square with 2x4s?

Step 1. Cut the 2x4s and plywood to size and sand them smooth. For each box, position four 2x4s (two 16-inch lengths and two 13-inch lengths) on a level surface with the narrow edge down and equal-sized boards at opposite sides to create a square. To hold this together, a couple of clamps should work.

How to attach carpet square to plywood?

Place the carpet square in the box using all-purpose adhesive to secure it to the plywood if you aren’t using adhesive-backed carpet. Apply a bead of the adhesive to the bottom of the PVC coupler. Glue the cut out carpet circle inside. Attach utility handles to your boxes and carry them out to the yard!

How long does it take to paint a woodshop?

Estimated time to complete: 2 hours, plus time for paint to dry. Woodshop safety: Always wear proper eye, hearing and breathing protection when working with power tools or hand tools, and always work on a stable surface.

How to secure wood to a box?

Predrill two holes through the longer boards and into the shorter boards with a drill bit that’s slightly narrower than your 3-inch screws. Use your drill/driver to secure the wood together with those screws and repeat for each corner, position it in the box, and hold it steady until it is set.

Step 1: Materials

We need the following: 4 - 16 inch 2x4 4 - 13 inch 2x4 8 - 1/2 inch washers, or any size washers that suit you 2 - 3 inch PVC couplings 2 16 inch squares of plywood. I used 3/8 inch.

Step 2: Wood

I got construction grade 2x4 that was 10 feet long. I would recommend if you have a bit more money to upgrade to higher grade wood, thats less likely to have splits and what not.

Step 3: Make the Box

I first pre-drilled all my holes, not all the way through, but a little bit. Makes the screw go straighter and its nice. I used wood screws to hold the pieces together. I also used a pipe clamp to hold the wood in place while I screwed it together. It is really easy to make the frame for the box. You need to make 2 of the boxes.

Step 4: Washers and PVC

If you want to color your washers, take 4, and spray paint them one color, and then spray paint another 4 a different color. you don't need to color them, but it makes it nice. IF YOU WANT TO PAINT THE BOXES, do that before you put the PVC in, because it will be much much much easier. Also, sand sand sand sand the entire thing.

Step 5: Other Ideas

You can add some sort of handle mechanism or even latches to keep everything secure for travel. I added handles made from some spare rope I found in the garage.

How many washers can you play in a game?

You can play with four was hers or two. Scoring can be done based on where the washer lands or based on the washer actually making it into the box or cup. The way we were taught to play is as follows: Each team gets 2 washers to toss. One member from each team takes turns tossing the washers.

How many points do you need to win in a washer game?

If a player lands the washer on the edge of the box and the opponent does not knock it off in their turn, the game is over. You must score exactly 21 points in order to win. You cannot go over.

How many points does a washer toss have?

Each team takes turns tossing the washers to the other game board, trying to score points. The team that reaches 21 points first, without going over, is the winner.

What adhesive do I use to put carpet on a game board?

Once the epoxy had hardened, I added the carpet to the game board. I used DAP RapidFuse All-Purpose Spray Adhesive for this. I unrolled some paper onto my workbench to protect it from getting sticky and laid the carpet pieces on it. I sprayed the circle piece first and then firmly set it in place inside the cup.

How do I cut a cup out of carpet?

To cut away the center portion of the carpet, I marked the center of the carpet square, then centered the cup over it. I traced the inside and outside edge of the cup on the carpet and then cut it out, starting with the outer line. Once the circle was cut away, I fit it into the box and then cut away the inner circle to fit inside the cup.

How many teams can score on each turn in the washers?

Once the washers are tossed, the score is tallied. Only one team can score on each turn.

What is the bottom of a game board lined with?

The bottom of the game boards are lined with outdoor carpet. I measured the inside dimensions of the frame and marked those measurements on the carpet with a ruler. I used a sharp pair of scissors to cut the square out and fit it inside the frame and trimmed as needed.

Cut the Plywood and PVC Pipe

Cut the plywood and PVC pieces to the measurements outlined below. Clean up the edges with sandpaper but avoid rounding them. Sand the surfaces to smooth as needed.

Assemble the Sides

Drill and countersink two pilot holes 3/8 inches from each end of each 16-inch board and 1 inch from each long edge.

Paint

If you want to paint the PVC pipe and drain, sand them and use spray paint that adheres to plastic.

Install the Carpet, Felt or Fleece

Find the center of your square by measuring across the middle from opposite corners. Make a line an inch or two long at the middle.

Attach the Base to the Sides

Situate a 16-inch plywood square on top of one side square. Align the corners and clamp the whole piece to your work surface.

Place the PVC Pipe

Turn the drain upside down and drill three 1-inch wood screws with washers through the existing holes to secure it to the base.

Attach the Latches and Handle

Lay one box on your work surface and lay the other one on top of it. They should be face to face. When they are aligned correctly, clamp them to the table.

How to play washer board game?

Actually, you’ll need two of them if you are to do it right. According to the official rules, there needs to be 27’ apart from the front edge of one board to the other. The game is usually played with pitching bags filled with sand instead of metal washers. That way, the board will be more or less protected.

How to get points in a washer game?

The objective of the game is to earn points by throwing small pieces of metal called “washers” into a hole. The washers usually have 2” in diameter and the hole is denoted by a PVC pipe (a.k.a. the cooter) or a can.

How many points does a washer box give you?

Now we have a game that you can play using regulation washer boxes. The rules are very simple in this game, too. Washer in the box gives you 1 point and 3 points if it’s in the cup. But if you happen to be so lucky to land a washer on top of any of the edges of the washer box then you will automatically become the winner of the game!

How many bags are in a pitcher box?

The same rules apply as for the singles play and each player has 4 bags to pitch. Official rules for playing washers state that the player must pitch with the underhand throw.

How far apart are the boxes in a golf pit?

Boxes and pits may vary in size and shape, but you will usually come across a standard one-hole box that has the dimensions of 16”x16”x4” and a cup in its center. The distance between the boxes should be approximately 20 feet. Most of the time players determine the distance by using a string, a rope or a chain attached to the front of both boxes.

Where do you throw washers in a box?

Players throw the washers in an attempt to get them n, on or near the box or in the pipe. When throwing, the player may stride forward of the front of the box or remain entirely in the back of the box, but at least one foot must remain behind the front of the box.

How many points do you need to win in washers?

Now, we’ll give you some tips on how to make sure you’re winning in washers. The first team or player that reaches 21 points is the official winner.

What is a washer game?

Learn more... Washers, also known as washer toss, is a fun yard game similar to horseshoes where 2 or 4 players compete to throw washers into a box. If the washer lands in the cup or hole in the middle of the box, they get more points. Washers is an easy game to learn in an afternoon and doesn’t require too much space.

How to play with washers with kids?

If you’re playing washers with children, move the boxes closer to one another so the kids don’t have to throw the washers as far. If you’re playing with a box that has 3 holes, measure from the centers of the middle holes. Avoid playing on a hard surface since the washers may bounce when they land.

How many washers do you get per team?

Depending on how you play, you may receive between 2-4 washers per team.

How to play washers with 2 people?

2. Divide the players into 2 teams. If you’re playing with 2 people, each person plays as an individual. If you have 4 players, split the group up into 2 teams consisting of 2 players each. You and your teammate will alternate rounds when you throw washers. Take 1 set of colored washers for you and your teammate.

What happens if a washer is outside the box?

If a washer is outside of the box, then it doesn’t score any points. If you’re playing a game that doesn’t have a framed box, then a washer that’s closest to the cup without being inside of it scores 1 point. When a washer is flat along the top edges of the box, then it counts as an automatic win.

How to play a box game?

1. Place the boxes 25 ft (7.6 m) apart on a grassy surface. Choose a grassy area that isn’t in the way of anyone else and is suitable for playing on. Set 1 of the boxes on the ground, and measure 25 ft (7.6 m) from the center of the cup inside the box.

Can washers bounce?

Avoid playing on a hard surface since the washers may bounce when they land.

How many washers does each team throw in a game?

Each individual or team throws 4 washers (one at a time), and whoever scores the 21 points first wins the game.

How many washers do you throw in a round?

Each player throws their washers from the same side over to the opposite board (facing longways). The player who throws first will throw all four washers, then the second player throws their washers. The player that scores the most in each round gets to throw first on the following round.

Who gets the point if a washer is knocked into a hole?

If a washer is knocked into the hole (by a member of either team), the point goes to the player who originally threw the washer.