- Measure the width and length of the window area to be covered.
- Cut backing to the exact width and adding 2 inches to the length.
- Cut a piece of fabric a little larger than the backing.
- Fuse the backing to the fabric. Work around the fabric with the iron, holding it in place for about 10 seconds in each spot. ...
- Trim excess fabric even with the backing.
- Turn up a 2-inch hem on the bottom of the shade and set with a straight row of stitching. ...
- Mark the roller with arrows indicating the direction it will roll. Place the roller at the top end of the fabric and tape or staple the fabric to it. ...
How do I choose the best window shades?
- Semisheer window treatments. A common space such as a family room or living room doesn’t usually require much privacy, but depending on the number of windows, it may always need ...
- Roller shades. Whether you have a bathroom on the first floor or on the second, closely situated neighbors can require privacy.
- Blackout curtains. ...
- Layered treatments. ...
How to choose shades for a window?
Things to consider when buying blinds and shades
- Light and privacy: Decide whether you want your room bright and airy or more "buttoned up" and cozy. ...
- Your budget: Are you outfitting just one window or the entire house? ...
- Safety: If you have kids, opt for cordless styles, since accidental strangulation is a top concern.
- Cleaning: Blinds don't need professional cleaning, but they can be dust magnets. ...
How to shorten a window shade?
- Remove the metal end stiffener bracket from the side (s) you are cutting.
- Use the hacksaw or tin snips to cut the headrail per your measured mark.
- File any rough edges with a metal file. ...
- Replace the metal end stiffener onto the newly cut headrail.
How to measure Windows for window blinds or shades?
- Use a steel measuring tape for the most accurate measurements. ...
- Keep a stepladder on hand to reach all locations and measure windows easily.
- Measure in inches not feet.
- Measure width from left to right, and length from top to bottom.
- Always measure to the nearest 1/8". ...
- Be careful when writing down your measurements. ...
How to open a window with a top rod?
To open just the top portion, detach the top rod and fold the fabric down on the window side. The top rod will hang while the second rod holds the panel in place, creating an opening that maintains privacy but brings in light from above. To open up just the bottom portion of your window, detach the top rod , fold it down on ...
How to make a window frame with a rod pocket?
2. Hem the sides of the fabric and then create the two rod pockets. For the top rod pocket, fold ¼ inch of fabric over and press to flatten. Fold again 2 inches, press flat, pin it down and sew it close to the edge.
How to open up a window with magnets?
To open up just the bottom portion of your window, detach the top rod, fold it down on the window side and move the second rod to the top magnet position.
How far from the top of a window should I put a middle flap?
I put this middle flap about 13 inches from the top of my window panel, but where you put yours will depend on the window height and how much of your panel you want to leave open on the top.
