Trace the shape of your spinner onto some cardboard or foam. Cut out your chosen fidget spinner stencil and place it onto a sheet of thick cardboard or foam board. Use a pen or pencil to trace around the stencil, being careful not to move it as you draw.
Full Answer
How do you make a fidget spinner out of paper?
With just a sheet of paper, a pair of scissors, and some string, you can make a popular, old-fashioned spinner known as the "twirly whirly." If you have a coin, then you can make a coin spinner instead, and if you want something more modern, then try your hand at an origami fidget spinner! Cut a sheet of colored printer paper into a square.
What do you need for this origami Fidget?
What you need for this Origami Fidget is... Unfold and fold in the top corners like a paper airplane. Flip and fold up, crease, and unfold. Turn back over and unfold the airplane fold and fold the end in, crease, unfold, and tear. Fold in half "Hot Dog Style", crease, and unfold. Then fold the bottom half in half and top half in half.
How do you make a spinning spinner out of origami?
Tuck the top flap of the blue piece down into the middle. Tuck the bottom flap of the blue piece up into the middle. You created the first part of your spinner! Once you have both sides, use a hot glue gun to stick 4 dimes on the edges of one of the origami halves.
How to use a toothpick as a fidget spinner?
In order for your fidget spinner to spin, there’ll need to be room around the toothpick for it rotate freely. Wiggle the toothpick in a few small circles around the hole to loosen it. Hold each end of the toothpick between your thumb and index finger and flick the base to make sure it spins properly.
How do you make a fidget spinner with paper easy?
These are easy to make and fun to play with.Step 1: Materials. ... Step 2: Fold Paper in Half. ... Step 3: Tear/Cut Along the Fold. ... Step 4: Fold the Half Sheets. ... Step 5: Fold Down the Corners of Each Piece. ... Step 6: Attach the Two Pieces to Create the Spinner. ... Step 7: Shape Spinner for Best Spinning Abilities. ... Step 8: Customize.More items...
How do you make a homemade fidget spinner?
5:4614:19How to make a Tri Fidget Spinner DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the next thing we want to do is to decorate our fidget spinner in fact i'm thinking about whichMoreSo the next thing we want to do is to decorate our fidget spinner in fact i'm thinking about which side to decorate i think i'm going to decorate the bottom and then we're going to glue.
How do you make a spinner out of paper?
2:435:16How To Make A Paper Spinner (That Really Works) - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown to the bottom make that crease fold. This side up to the top. So again the flap put it downMoreDown to the bottom make that crease fold. This side up to the top. So again the flap put it down spin. Again what you have is a square with the two triangles.
How do you make a fidget spinner without bearings?
0:062:43DIY | BEST Fidget Spinner (WITHOUT Bearings) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just a few simple supplies. Here's what you'll need to get started popsicle sticks toothpicksMoreAnd just a few simple supplies. Here's what you'll need to get started popsicle sticks toothpicks bubble cap stickers a crop-a-dile a hot glue gun. And embellishments are optional.
How do you make a easy fidget spinner toy?
0:045:43DIY FIDGET SPINNERS! 3 Ways To Make A Fidget Spinner Toy!YouTubeStart of suggested clipEnd of suggested clipSo the first vid spinner DIY that I want to show you is actually my favorite. And this is actuallyMoreSo the first vid spinner DIY that I want to show you is actually my favorite. And this is actually using a glue gun. So I'm starting off by making an actual mold. And I'm using amazing mold putty.
What are some homemade fidget toys you can make?
12 Fidget Toys Kids Can Make ThemselvesFidget Putty. Little Bins for Little Hands. ... DIY Emoji Squishy Stress Balls. Hello Creative Family. ... Fidget Paper Clip. Sensibly Sara. ... DIY Flour Stress Ball. My Crazy Good Life. ... DIY Watermelon Squishy Toy. ... DIY Infinity Cube Fidget Toy. ... Endless Lego Fidget Cube. ... Popsicle Stick Fidget Spinner.More items...
How do you make a paper fidget cube?
1:496:11Functional Paper Fidget Cube! (Tutorial) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSocket how to make a fidget cube out of paper part three on the template locate the paper pop socketMoreSocket how to make a fidget cube out of paper part three on the template locate the paper pop socket score the dotted lines. And cut the bold lines don't forget the slits.
How do you make a cheap spinner?
A Split-Pin and Paper Clip This is one of the easiest and most effective ways to make a home-made spinner, and my personal favourite! Make a hole in the centre of the spinner. Take a split pin and insert it though the narrowest loop of a paper clip. Then push the split pin through the hole in the spinner.
What materials do you need to make a fidget spinner?
Arts and crafts blog, Red Ted Art, has come up with an easy way of making your own fidget spinners with basic materials. For this method, you just need some cardboard, a toothpick, two or three penny coins, a glue stick and PVA glue, some scissors and a pin.
How do you fidget without a toy?
Alternatives to Fidgeting ToysPop bubble wrap.Wear hair ties or rubber bands around the wrist and pull or pluck them.Twist pipe cleaners.Play hand games for kids.Loop a rubber band around a finger and thumb and flick/strum it.Twist and bend straws.More items...•
How do you make a fidget pillow?
1:217:43How to Make a Homemade Fidget Activity Mat with Fabric - DIY ProjectYouTubeStart of suggested clipEnd of suggested clipI went with what I had around the sewing room so I used a zipper buttons an empty spool ribbons aMoreI went with what I had around the sewing room so I used a zipper buttons an empty spool ribbons a piece of cord velcro. And a little ball that has a bell on the inside.
How do you make a vending machine fidget?
2:0713:08How to make a MINI vending machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor where I wanted my little charms to be seen through and then I decided that my box was a littleMoreFor where I wanted my little charms to be seen through and then I decided that my box was a little bit too kind of like deep. So I made a little insert cut that out from some scrap cardboard.
What can I use instead of a fidget spinner?
5 Alternatives to the Fidget SpinnerFinger Squash-It. Finger Squash-It: its non -toxic gel filling provides a tactile sensory input while the glitter sparkles mixed in are subtle and not overwhelming. ... Gel-E-Fidget. ... Tangle Therapy. ... Bug-Out Bob. ... Yuk-E-Ball.
How do you make a cheap spinner?
A Split-Pin and Paper Clip This is one of the easiest and most effective ways to make a home-made spinner, and my personal favourite! Make a hole in the centre of the spinner. Take a split pin and insert it though the narrowest loop of a paper clip. Then push the split pin through the hole in the spinner.
What materials are fidget spinners made of?
Fidget spinners can be made of a variety of materials, including plastic, brass, stainless steel, titanium, and copper.
How do you make a spinner for kids?
0:357:02How To Draw A Fidget Spinner - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's going to be flat like that then we're going to draw we're going to draw over here on theMoreSo it's going to be flat like that then we're going to draw we're going to draw over here on the right but a little up so here we go we're going to draw the same just try and use your imagination.
How does a fidget spinner work?
Fidget spinners act like gyroscopes once they begin to spin, creating torque around the gyroscope's axis of rotation. Torque is a type of force that is created by the rotational movement of an object. If you're looking down at your fidget spinner, and you spin it counter-clockwise, the resulting torque will push the spinner towards you. Try rotating your spinner in different directions after you've given it a good spin, and see if you can feel the resulting torque.
Why do fidget spinners keep spinning?
Fidget spinners keep spinning for two reasons. First, many fidget spinners have a ball bearing at their center, around which the rest of the spinner rotates. Ball bearings use many small, metal balls to reduce the friction between an axis (the center of the bearing) and the object rotating around it (the spinner).
How to fold a pink triangle?
For the pink piece, fold the bottom triangle inwards to the right. For the blue piece, fold inwards to the left.
How to fold pink and blue?
Fold the top of the pink piece to the left and the blue piece to the right. Use the previous halfway crease as a guide.
How to make a pink square?
For the pink piece, fold the top part of the upper square to the bottom left corner. For the blue piece, fold down the upper square to the bottom right corner.
What to make with paper and string?
Sometimes, the most entertaining toys are the simplest ones. With just a sheet of paper, a pair of scissors, and some string, you can make a popular, old-fashioned spinner known as the "twirly whirly." If you have a coin, then you can make a coin spinner instead, and if you want something more modern, then try your hand at an origami fidget spinner!
How to make an X shape on paper?
Crease the paper diagonally to make an X. If you need to, re-fold the top-right corner to the bottom-left corner again, and sharpen the crease. Unfold the paper, then fold the top-left corner to the bottom-right corner. Sharpen the crease as well, then unfold the paper. You should have an X-shaped crease in the middle.
How to fold a paper strip?
Fold 1 end of the strip along the first diagonal crease. Fold the other end of the strip across the second diagonal crease in the opposite direction. When you fold the ends of the paper towards the middle , make sure that they align with the central crease. Don't fold both ends along both diagonal creases.
How to make a mirror image of a paper strip?
Cut the paper into a square, then crease it diagonally both ways. Fold it into a skinny rectangle, then fold the ends past each other. Turn the corners up when you are done. When folding the ends past each other , do it in reverse, so that the second strip is a mirror image of the first strip. 7.
What happens if you make a cardboard circle?
If you made a cardboard circle, leave it blank; it will go between the printer paper circles.
Why is cardboard needed for printer paper?
The cardboard circle is necessary for printer paper to help make it stiff. The thin cardboard from a cereal box would be perfect.
How to make a triangle out of paper?
1. Cut a sheet of colored printer paper into a square. Take a sheet of colored printer paper. Fold the top-right corner down so that the right short edge is aligned with the bottom long edge. Cut the excess paper to the left off so that you get a triangle, then unfold the paper.
How to make a fidget spinner spin?
Wiggle the toothpick around to widen the hole. In order for your fidget spinner to spin, there'll need to be room around the toothpick for it rotate freely. Wiggle the toothpick in a few small circles around the hole to loosen it. Hold each end of the toothpick between your thumb and index finger and flick the base to make sure it spins properly.
What is a fidget spinner?
Fidget spinners are a fun and easy way to keep yourself busy while working, as well as being a great toy to play with and spin whenever. While they're pretty easy to come by, finding a fidget spinner that looks and spins exactly the way you want it to can be difficult.
How big should a toothpick spinner be?
Be careful not to widen the hole too much, as this will make your spinner wobble while it spins. It should be just big enough that it can spin around the toothpick with little resistance.
What do you glue to the back of a spinner?
You may want to glue printer paper or colored paper to the front and back of your spinner base.
How to make a spinner out of cardboard?
Cut out 2 small circles of cardboard or foam. Find a small circular object, such as a penny or another small coin, that can sit comfortably in the center of your spinner. Place it on a piece of cardboard or foam, draw around it, and cut it out. Repeat the process so that you have 2 evenly sized circles.
How to tell if a circle is close to the spinner base?
Make sure that the circle is very close to the spinner base, but not quite touching it.You should be able to see a sliver of light through the gap, but it should be very small.
How to find the center of a spinner?
You can find the exact center of a 2-prong spinner by measuring the length and width and dividing each by 2. On a spinner with an uneven number of prongs or an irregular shape , draw a straight line through each prong towards the center. The area where they meet is the middle.
