how do you make coasters out of old magazines

Magazine Coasters

• Step 1: Things You Will Need - Old magazines - Scissors - Modge Podge or Rubber Cement with brush - Paper clip Add Tip ...
• Step 2: Making Strips Rip out colorful pages from old magazines. ...
• Step 3: Glue and Cut Spread glue along the edge and fold over one last time. ...
• Step 4: Rolling the First Strip ...
• Step 5: Rolling Remaining Strips ...
• Step 6: Drying ...

Full Answer

How to make a coaster look more attractive?

How many pages are needed for a coaster?

How to make a paper roll?

How do you craft with old magazines?

Funky Ways to Reuse Old MagazinesPicture Frames. Surround wonderful moments from your life with a cavalcade of colors in a frame decorated with magazine paper reeds. ... Decorative Bowl. ... Gift Wrap and Bows. ... Party Decor. ... Paper Flowers. ... Drink Coasters. ... Paper Furniture. ... Jewelry.More items...

How do you make coasters out of old newspapers?

Rolled News Paper CoastersStep 1: Cut Paper Into Strips. Take old news paper, fold them and cut into 4 inch wide strips.Step 2: Roll Paper Strips. Using long skewer, roll the strips to long thin pieces. ... Step 3: Make Coaster. Now take one long rolled paper and start rolling in a round shape.

How do you make coasters out of old books?

1:528:4610 Ways to Repurpose Old or Damaged Books - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce they're all dry i like to put little sticky circle pads on the bottom. And you have yourselfMoreOnce they're all dry i like to put little sticky circle pads on the bottom. And you have yourself some fabulous coasters perhaps made with your favorite book as a child.

How do you print coasters at home?

0:321:59Printing on Coasters/Hardboards - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what you'll do is you'll put cork side down or print side up take your non-stick sheet and lay itMoreSo what you'll do is you'll put cork side down or print side up take your non-stick sheet and lay it right on top and now we're going to close. It.

How do you make paper coasters waterproof?

You're going to want to coat the image and coaster with at least three coats of Mod Podge, allowing it to dry for 15 minutes (or until clear) between coats. Once the final coat has dried, spray all of the coasters with a clear acrylic gloss spray, which ensures that they're waterproof/drink proof.

What product can you make out of old newspapers?

Here are 34 fantastic ways to recycle yours.Cleaning windows. Using an old newspaper to clean windows works better than a cloth for preventing streaks. ... Shelf lining. ... Cat litter box liners. ... Barbecue cleaner. ... Packing material. ... Weed killer. ... Papier mache. ... Fire starter.More items...•

How do you make cheap coasters?

0:466:53How to Make Coasters - DIY Gift Ideas - YouTubeYouTubeStart of suggested clipEnd of suggested clipPodge.MorePodge.

How do you make custom coasters?

0:422:45DIY Project: Custom Coasters - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet it dry or use a blow dryer to speed up the drying time. Then apply another thin coat of ModMoreLet it dry or use a blow dryer to speed up the drying time. Then apply another thin coat of Mod Podge to the tile. Let it dry again. Next apply a clear polyurethane to protect the image from liquids.

What can I use for coasters?

Household Materials You Can Transform into DIY CoastersClay. Clay coaster ideas appear on several DIY craft and home decorating blogs. ... Clothesline. We're not sure who first came up with the idea to sew coiled clothesline together for use as coasters. ... Felt. ... Leather scraps. ... Rice and fabric. ... Old t-shirt. ... Scrap paper. ... Wine corks.More items...•

How do you transfer pictures to coasters?

Brush a light coat of Mod Podge on both the tile and on the photo (the front of the photo, NOT the back). Place the photo onto the tile, taking care to line up the photo with the tile. Press firmly, and use card stock, a credit card, or a folder to smooth at any bubbles (but be careful not to rip the paper!).

What size should a coaster be?

3.5 inch and 4 inchStandard Drink Coaster Sizes: The standard sizes in North America for promotional bar or restaurant coasters are 3.5 inch and 4 inch. By far the most common size ordered are the 4 inch size. Custom Coaster Shapes: We can design and manufacture almost any size or shape coaster for your truly custom branded promotion.

How do you seal coasters?

0:215:01Sealing Coasters with Epoxy Resin - quick and easy way to seal coastersYouTubeStart of suggested clipEnd of suggested clipBut a lot of you asked for how to seal them. So i seal my resin or i see all my coasters with resin.MoreBut a lot of you asked for how to seal them. So i seal my resin or i see all my coasters with resin.

How do you make coasters with Cricut?

4:546:56How to Make Cricut Coasters with Infusible Ink // DIY Cricut ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd place it on top. And then we'll take the easy press and place it on top of the coaster. We don'tMoreAnd place it on top. And then we'll take the easy press and place it on top of the coaster. We don't need any pressure. So you can literally just set it down for 240. Seconds.

How do you make coasters heat resistant?

Finally seal your coasters with two or three coats of acrylic spray or varnish, or you could try using a clear engine lacquer which is heat resistant and helps stop hot mugs from sticking. You might find you need to 'cure' them for a week or two to stop them being tacky when used.

How do you make tile coasters with Cricut?

0:1015:21DIY Tile Coaster using your Cricut and permanent vinyl {Under $1 dollar ...YouTubeStart of suggested clipEnd of suggested clipMachine all you're going to need is some permanent vinyl cricut transfer tape tiles. And corkMoreMachine all you're going to need is some permanent vinyl cricut transfer tape tiles. And cork backing i'll leave everything you need in the description. Below these were so much fun to make so let's.

How do you make Modge podge coasters?

InstructionsCut square pieces of paper to fit the tiles using scissors.Add a layer of Mod Podge to the top of a tile; place the paper down and smooth. ... Using the stamps, stamp out the names/date/etc. ... Seal each tile with 2 - 3 coats of Mod Podge, letting dry between coats.Trim cork to fit the back of the coasters.More items...•

How to Make Drink Coasters From Old Magazines

You can make nice looking coasters from old news prints. Almost every home has a pile of old newspapers. Newsweek, Time, and Washington Times - the list goes on and on. Little did you know that you can convert these discarded materials into useful drink coasters. So you see, you have more than enough papers to make several coasters.

Magazine Coasters : 6 Steps (with Pictures) - Instructables

Magazine Coasters: We buy magazines, flip through them and then toss. With so many colors, fonts and fine details within, we barely take the time to read the headlines. Having worked for Ethos Magazine as photo editor for the past three years, I know the great amount …

60 Magazine Page Crafts to Make - Saved By Love Creations

If you have been around here long, you know that I am a fanatic about recycled magazine crafts. You will see a lot of my projects in this collection, as well as those that have inspired me along the way.

Make Bowls from Magazine Pages - Creative Cynchronicity

Now close the whole thing up along that center fold. If you sew, you can think of it like double fold bias tape. When it’s all folded, your strip that started as 1 inch would now be 1/4 inch wide.

How to make a coaster out of magazines?

I found that advertisements work best if you want to use a variety of colors. Fold the straight edge of the magazine over about 1/4 of an inch. Make about 4 folds. you should stick with the same fold size so that when your coaster is complete, it lies flat and is all one level.

How to make a coaster with glue?

For the first strip, (the center of your coaster) apply glue all along one side of the strip. Then open up a paperclip and roll the strip around the paperclip with your fingers. Using the paperclip will allow the center to be tight and circular. Ask Question.

What to do with old magazines?

If you have old magazines piling up and taking up your precious space, get rid of them in an Eco-friendly way ! With extra magazines and some time, you can turn them into various sized bowls (for fruit, mail, miscellaneous small items), or coasters for your home. These items make aesthetically pleasing and useful decor for your living space.

What do you get when you fold a paper bowl?

In most advertisements the model (s) are centered, so if you fold the paper in the right way, you can get mainly bodies, faces, eyes, or clothing to show throughout the sides of the bowl and/or coasters. Ask Question.

How to make a circle out of paper?

To begin, take one folded page and using the hot glue gun, place glue along part of one side, rolling the paper on top of itself ; it should be a circle (not necessarily a perfect one, but that gives it more character!). Leave a small end free, so the next strip can be glued underneath it, to continue the circle.

Can you spray modge podge on coasters?

Mod Podge dries clear, so don't worry about being generous on the coating. Once the coasters are dry, you can spray them with the water-proof sealer so they can be used for drinks. They may need to be re-sprayed from time to time, since they are made of paper and are being used for drinks.

What do you need to make a Perler coaster?

You just need the beads, a hot iron, and some wax paper. Learn everything about making these Perler bead coasters!

When were table coasters invented?

Table coasters, also known as coasters, drink coasters, beermats, beverage coasters, and so on, are quite useful. They’ve been around since the 1700s, perhaps even before then. They were originally used for decanters and wine bottles so they could be “coasted” around the table after the servants went to bed.

Why do we need coasters around the house?

Coasters for your drink may seem like a small thing to have around the house, but they’re essential to protect your furniture from mugs and glasses that are too hot or too cold, as well as from those annoying little spills that may taint your table.

Can you make coasters from magazines?

Take some of your old magazines and create coasters from them! You don’t need mod podge or tile foundations, instead, you can weave the pieces. Learn how to make these great coasters with the guide on How About Orange.

Can you make alcohol coasters with alcohol ink?

These coasters are absolutely stunning and hand-designed using alcohol ink. If you’re artistic in spirit, this DIY may be right for you. Get the tutorial to make some yourself by reading it on My Good Morning.

Can you jazz up tile for coasters?

Wallpaper scraps or some free swatches you can order from you favorite stores can jazz up tile pieces to create the most perfect coasters for the living room. Get the tutorial for these coasters from Thinking Closet.

Can you make nautical coasters with rope?

If you can get some cotton rope and some paint you can recreate these adorable nautical coasters. They’d be perfect to add some summertime flair to the house or porch. These cool designs were made by hi, friend.

How to make coasters from old magazines?

Turn those old magazines into beautiful new coasters! You can easily make coasters from the pages by coiling them. Not only does this give you a great new set of coasters, but it helps you to use up those magazines without having to throw them out. You can protect your coasters and make them last longer by giving them a thin coat of shellac or Mod Podge when you’re finished with the coiling.

What to do with old magazines?

Use those old magazine pages to embellish your bobby pins and give your hair a new style. You can do this with children’s magazines to get great pictures or colors for little ones or make a few for yourself with any magazine that you may have on hand. They’re pretty easy – you just roll the magazine pages around the bobby pin essentially. These would be great gifts for someone special, too.

What to do with upcycled magazine bags?

If you have a party coming up, these upcycled magazine goody bags are perfect. These would also be great for handing out Halloween candy or just anytime you need a cute little bag to fill with candy. These require some sewing so get your sewing machine ready. They’re pretty easy to make and I love that they’re created with recycled magazine pages!

How many magazines do you need to make a wreath?

It’s made with a few old magazines and it has such a great, unique look. You’ll need about three magazines to make this one, depending on the thickness of the magazines that you are using. You just cut squares from the pages and roll those squares around a dowel to get the right shape. Then put it all together and wow your neighborhood!

How to make envelopes for birthdays?

You can create custom envelopes for birthday or other special occasion cards by using old magazine pages. You’ll need an envelope in the size that you want to make which will serve as the template. Then you just cut out your magazine pages and create the envelope, gluing as you go. This is a wonderful way to get some customized envelopes for stationary or anything you want to use them for.

How to make a butterfly chain?

To make this gorgeous butterfly chain, just cut magazine pages into almond shapes and then fold. Once you have all your butterflies made, pinch them in the middle and tie them all together. These are so great! They’re really easy to make and would be wonderful as party décor.

How to make a Christmas tree from old TV guides?

You just have to fold the magazine pages down halfway, which creates a Christmas tree shape when you open the magazine completely and tape the two cover pages together. Then just paint with whatever colors you want for your décor and you have beautiful little Christmas trees that won’t cost you anything but a little time.

How to make a coaster look more attractive?

As with the glue, allow time for the spray gloss coat to dry completely. To make the coaster look more attractive, run a coloured ribbon along the entire perimeter of the coaster. As with the paper strips, glue the loose ribbon end in place.

How many pages are needed for a coaster?

For instance, if you are making a coaster that can hold a soda can, you will need about 12 pages.

How to make a paper roll?

Roll up a paper strip until the entire strip has been used up. Liberally apply glue to secure the end of the strip to the rest of the roll. Roll one paper strip over the initial paper roll and secure each strip end in place with glue. Continue until all the paper strips have been used up.