To make curtain rods longer- Two similar curtain rods are purchased, “rod A and rod B ”. Both of them have two finials each. From rod “A” and “B” one finial and a smaller pieces are removed. Smaller piece of rod “A” are attached with rod B and vice-versa to create a long curtain rod.
Full Answer
How to create an extra long curtain rod?
How to make extra long curtain rods from black iron pipe. Assemble your curtain rod on the floor. Screw together the floor flange with the ¾"x4" black iron pipe, attaching the black iron 90 to the end. Continue for both ends and then attach your full-length black iron pipe to the middle, creating a fully assembled curtain rod.
How to make a cheap, Awesome, DIY curtain rod?
Instructions
- Cut the electrical conduit to length. ...
- If you choose to paint your curtain rods, it is easiest to paint each of the pieces before assembling the DIY curtain rod brackets. ...
- Once the primer is fully dry, paint each component with a few thin coats of your chosen spray paint.
- Align the hold of each one-hole strap with the last hole of each corner bracket. ...
How to make your own set of DIY curtain rods?
Instructions
- Determine the width of the curtain rod for the window.
- Create the metal curtain rod brackets using the material.
- Cut the conduit pipe to the predetermined width.
- Spray paint all the curtain hardware.
- Install the brackets onto the wall and place the rod.
How to hang a long curtain from the ceiling?
- Measure the height from ceiling to floor. ...
- If you want the ends of your draperies to reach just the windows, make a measurement and mark the area on the wall below the windows where you want the ...
- The ceiling’s height determines how to hang your curtains. ...
Where do couplers sit on a curtain rod?
How to make curtains slide smoother?
How to shorten a cork?
Can you extend a curtain rod on either side of a large window?
How do you make super long curtain rods?
0:224:51DIY Custom Curtain Rod - Steel Pipe - 15 FEET LONG - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust fit right through it. And we'll cap the ends. One inch to a half-inch reducer T if the tunersMoreJust fit right through it. And we'll cap the ends. One inch to a half-inch reducer T if the tuners nipple to instantly and half inch flange plate. And the nipple goes right there that.
How far can a curtain rod span without support?
1 ⅜” Wooden rods and 1 ⅜” Designer Metals can go 60 inches without support. 2” Wood can go up to 96” and should have support brackets if high up. Wrought iron can go up to 96” without support but is heavy so support is safer. It's safe to support every splice and joint on a rod.
How do you connect two curtain rods together?
0:020:42How to join 2 lengths of curtain pole - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it's very simple you place the joining splice into the end of one piece of bolt and pushing pinMoreAnd it's very simple you place the joining splice into the end of one piece of bolt and pushing pin halfway. Along take the other piece of pole. And then just push the two pieces together.
Can you connect curtain rods to make them longer?
Standard curtain rods are expandable from 28 to 48 inches or from 48 to 84 inches, and for extra-wide windows, you can purchase rods that extend as far as 159 inches.
How far should a curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window's inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window's frame.
Do curtain rods need to be hang on studs?
Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.
How do you make a homemade curtain rod?
1:499:2610 DIY Curtain Rods Ideas That Will Upgrade Your Window - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind yourself a matching finial. Then install them on both sides of the rod you could also buy someMoreFind yourself a matching finial. Then install them on both sides of the rod you could also buy some new hangers for the curtain. Place the rod in its place. And you will like how it comes out.
How do you make a double curtain rod?
0:335:06DIY Double Hung Copper Curtain Rod - YouTubeYouTubeStart of suggested clipEnd of suggested clipSince we are making a double hung curtain rod i'm using two pieces of wood the bottom is going to beMoreSince we are making a double hung curtain rod i'm using two pieces of wood the bottom is going to be 1x4. And the top is going to be a 1x2.
Why use a double curtain rod?
Although very similar in design to single curtain rods, a double curtain rod allows you to layer more than one drapery panel or curtain for a more enhanced and dramatic look. Most typically, people layer a sheer curtain first and then a regular curtain on top to block out light.
Can you put 2 tension rods together?
The In-Tension Rod Joiner allows you to combine multipe In-Tension rods for wider windows. One-year warranty. Use one Joiner and two 30" - 52" In-Tension Rods to achieve a width of 90" - 104". Use one Joiner and two 52" - 90" In-Tension Rods to achieve a width of 104" - 180".
What is the rule for hanging curtain rods?
If the room has crown molding, hang the rod an inch or two below it. If not, the rod should hang as many inches above the window casing as it extends wide. (For example, if the curtain rod extends 5 inches wider than the window casing, hang it 5 inches above the window casing.)
How long can curtain rods be?
Most curtain rods are available in sizes of 4 to 12 feet long, while other curtain rods come in sizes up to 15 feet long. However, the best way to buy extra long curtain rods is to purchase two or more rods and join them together with a connector screw or internal rod splice. Add support brackets where the rods join.
How do you support the middle of a curtain rod?
To reinforce your curtain rod brackets and secure your curtain rod, try these methods: Use curtain rod anchors or longer screws. Use a thicker or more durable curtain rod. Install one or more center support brackets.
How do you hang curtains on a 12 foot ceiling?
For curtains on 12-foot walls, use 132-inch curtain panels. This size covers the floor when hung from one foot below the ceiling. Hanging curtains one foot below the ceiling works in most rooms and with most windows. It's better to leave extra room above the window frame with a high curtain rod.
How many people are required to hang an extra long curtain rod?
Two people are required to hang an extra long curtain rod.
What is the longest curtain rod length?
Black iron pipe can be found at your local hardware store, the longest length can be 20ft or more. The curtain rod we built was 12 ft of continual pipe.
How long can curtain rods go without support?
There is a lot that can play into this, in our experience we have gone 12ft without support. The longest curtain rod in our living room spans 12ft and does not have a support bracket in the middle. The rod also holds 4 black-out curtain panels.
How to measure for curtains?
Measure the entire length of the window -- including the window frames -- for curtains that will overlap the frame. Include additional length to leave windows completely exposed when curtains are opened. For example, if you want your entire window to be in view when the curtains are opened, add another 24 inches to your total measurement.
What is the best way to connect a rod to the wall?
Buy a central bracket -- the bracket that will support and connect the middle of your rod to the wall or ceiling -- one size bigger than your rod thickness to accommodate the extra bulk of the connector.
How to put conduit in a connector?
Place one piece of conduit into one end of the connector, also known as a coupling. Tighten the screw on the connector to hold the conduit in place. Put the other piece of conduit into the other end of the connector and tighten the screw.
Why cut conduit to equal size?
The benefit of cutting both pieces of conduit to equal size is that the connectors are centered in the middle of the window for a more pleasant appearance.
What to use to sand conduit?
Sand the cut edge of the conduit with aluminum oxide sanding paper or emery cloth, if necessary.
Can you make an extra long curtain rod?
Fortunately, there is a fast and frugal way to construct your own extra-long curtain rod. With metal conduit, a hacksaw and some connectors, you'll be hanging up those designer curtains on your custom curtain rod in no time.
1 – DIY Wooden Dowel Curtain Rods and Matching Brackets
I actually made these curtain panels and curtain rod for our last home, and I was SO sad to see them go! I bought a long wooden dowel and wooden brackets at Home Depot. Then I made a custom stain with wood stain and chalk paint.
2 – DIY Industrial Pipe Curtain Rods
In our new house, I decided to use plumbing hardware for our curtain rods. They are perfect with sheer white Ikea curtain panels. They give us privacy (since these windows face the front yard), but still let in plenty of light.
How long does it take to make curtain rods?
These DIY curtain rods were assembled, painted, and hung in less than 3 hours. You can't get much easier than that!
Do you need curtains for a curtain rod?
Now that you have the curtain rods, you need the curtains. Here are several DIY curtain ideas with easy-to-follow tutorials.
DIY Curtain Rods
These DIY curtain rods are cheap and easy to make, even if you need to fit extra long windows. You can easily make any size curtain rods you need in any finish.
DIY Curtain Rods for Large Windows
A budget friendly way to make your own DIY Curtain Rods - Use electrical conduit, paint, and add decorative finials. These are a great alternative to the high prices of rods for large windows.
DIY Industrial Curtain Rods
Learn how to make your own DIY industrial curtain rods for a fraction of the cost.
How to Make Long Curtain Rods for Sunrooms and Big Windows
Are you struggling to find a long curtain rod for large windows or a sunroom? Extra-long curtain rods can cost a pretty penny, but this DIY long curtain rod is a simple, affordable, and stylish solution.
DIY Wooden Curtain Rod and Brackets
Make your own quick & easy DIY wooden curtain rod and brackets for a fraction of the cost!
Easy and Cheap DIY Curtain Rods
These budget-friendly DIY curtain rods are easy to make and the perfect alternative to a custom-length curtain rod!
DIY Long-Length Curtain Rods
If you have a very large window, curtain rods can get expensive. See how you can make your own DIY curtain rod out of pvc pipe to add to an existing rod and save tons!
How long should a curtain rod be?
If possible, you should buy a rod that is 8 to 12 inches longer than the width of your window. This allows 4 to 6 inches on each side of your window for your curtains to rest, showing the full width of your windows and allowing more natural light in during the day.
How wide is a Kirsch curtain rod?
Kirsch Designer Metals rods are also available in a fixed width of 7 feet 9 inches or telescopic options of 38” to 66” and 66” to 120” wide if you’re looking for a curtain rod of 10 feet or shorter.
What is the width of a Kirsch architrac rod?
Kirsch Architrac Rods on the other hand, are non-decorative. Although, the newest Architrac rod, the Kirsch K-Rail rod, is slightly more appealing to the eye. These rods are available in lengths of 24” to 192” wide. Other architrac options are the cord draw rod and baton draw rod which are both available in lengths of 24” to 360” wide (up to 30 feet long!). All architrac rods can support up to 80lbs of drapery weight and can be split draw, left draw, or right draw.
How long are Kirsch estate rods?
These rods are available in 1 ⅜” or 2” diameters in wood or metal. Rod lengths vary from 36” to 192” long (3 feet to 16 feet wide). Choose between a variety of finishes and finials to create a beautiful setup for your home or business.
What is the difference between a single and double curtain rod?
The primary difference between single and extra long double curtain rods are the types of brackets that are used. Choose double brackets in your preferred drapery collection, a second rod, as many rings as your draperies need, and two pairs of end caps or end caps for the back rod and finials for the front rod. Additional support brackets may be needed depending on the length of your rod and the weight of your draperies.
Is there a difference between long and extra long curtain rods?
There is no true answer for the difference between long and extra long curtain rods. Essentially, they are the same thing. However, we’ve done our best to categorize different types of curtain rods based on standard lengths and sizes. Each of the following categories include rods and matching hardware you will need for your window project.
Do you need extra support brackets for curtain rods?
With the added length of your curtain rods, you will need extra support brackets to safely and securely complete your installation. You may also want to consider extra long heavy duty curtain rods. Kirsch decorative Estate Rods are beautiful and functional in residential settings while Architrac and K-Rail rods work best in hotels and business spaces.
Where do couplers sit on a curtain rod?
The coupler will sit in the center support rod , with the screws pointed towards the wall and won’t really be visible. You won’t need to worry about the curtains gliding over it.
How to make curtains slide smoother?
Before putting up the curtains on the rod, add some paste wax with a cloth or paper towel to the top half of the curtain rod to help make sure the grommets slide nice and smooth every time you open and close the curtains.
How to shorten a cork?
Using a utility knife and working over a cutting board or surface that is safe to cut on, shorten a cork.
Can you extend a curtain rod on either side of a large window?
If you want to extend your curtain rod on either side of a large window (and believe me, you really do), or you have a couple of windows to dress, you either need to
