How to Make Eyelet Curtains
- Method 1 Measuring and Cutting the Fabric Download Article. Start with your curtain rod mounted above the window. ...
- Method 2 Inserting the Eyelet Tape and Rings Download Article. Use an even number of eyelets for your curtain panel. ...
- Method 3 Hemming the Panels Download Article. Press the top hem with an iron. ...
How do you make eyelet curtains with curtain rings?
2) Fold under 2cm at the top of the curtain panel and lightly iron. Pin the eyelet tape along the top edge of the fabric and sew into place. Draw around the inside of each ring with a fabric pen, then cut out these circles to create the eyelet holes.
How do you cut a curtain with eyelet tape?
Cut a length of eyelet tape to match the width of your curtain fabric. You can do this by measuring the eyelet tape to the same width of the curtain fabric, or by laying the tape out onto your cut-out curtain fabric to eyeball the width. Once you know how much eyelet tape you need, cut 1 piece for each curtain panel.
How many eyelets do I need to make a curtain?
It’s okay if the eyelet tape needs to be up to 8 in (20 cm) narrower than the curtain fabric, since 4 in (10 cm) of fabric will be used in the hems on the left and right sides. If you take measurements and determine that you need 11 eyelets, just subtract 1 and cut a length of tape containing 10 eyelets instead.
How do you sew a curtain panel together?
Cut your fabric length. Fold 2cm under on each side of the panel, front to back, lightly iron then fold under again. Pin into place and sew to secure the hems. 2) Fold under 2cm at the top of the curtain panel and lightly iron. Pin the eyelet tape along the top edge of the fabric and sew into place.
Is it easy to make eyelet curtains?
The eyelet heading creates a simple, modern edge and an eyelet curtain is easy to hang as it just slides on to the pole so you can shut out the bad weather in style.
How much fabric do I need for eyelet curtains?
How to measure for eyelet curtains? For eyelet curtains, measure from top of the pole to your finished drop and then add on 5cm. Eyelets are typically set 5cm down from the top of the fabric, so you need to allow for this.
How do you cut holes in fabric for eyelet curtains?
Cut out eyelet holes in the fabric along the traced lines. Pinch the curtain fabric to create a small fold in the center of the circle, and clip this with your scissors. Cut across to the marked line and proceed to make small cuts all the way around the circumference of the circle. Avoid cutting into the eyelet tape.
Do you double the width for eyelet curtains?
You need close to double your window width, but you don't need to limit yourself to one or two curtains.
What size pole do I need for eyelet curtains?
28mmThe ideal diameter of a metal curtain pole for eyelets is 28mm. So if your pole is 28mm diameter or slightly smaller then it will be fine for your eyelet curtains.
How do you measure for eyelet curtain width?
Simply measure between the finials (the decorative ends) to obtain the width. Drop: The inner edge of the eyelet is set down 3cm from the top of the curtain so you need to allow for this when measuring or your curtains will be 3 cm too short!
How much space should be between eyelets?
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge.
How do you cut eyelet holes?
1:585:58How to Insert an Eyelet in Fabric - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I just fold my fabric. And I just do a little. Cut just to get it started and then. I can stickMoreSo I just fold my fabric. And I just do a little. Cut just to get it started and then. I can stick my scissors. In here and I usually kind of form. Like an X or a cross. And then I can try it. Out.
How do you make curtains with eyelet rings?
4:075:34How to make eyelet curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut the eyelet tape to the width of the curtain. And pin in place. Using a fabric marker traceMoreCut the eyelet tape to the width of the curtain. And pin in place. Using a fabric marker trace around the inside of the islands. Then take the tape off and cut out the circles.
How much fullness do you need for eyelet curtains?
- An eyelet curtain will usually have 2 x fullness = 100% of the track width. - A pinch pleat curtain requires more fabric to sew in the pleats as it gathers up tighter. As such you will require 2.5x the track width or 150% fullness.
How should eyelet curtains look when closed?
0:301:34How to Hang Eyelet Curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe outermost eyelet goes outside the bracket. Between the bracket and finial this will stop yourMoreThe outermost eyelet goes outside the bracket. Between the bracket and finial this will stop your curtains from sliding all the way across your window. Finally check that your curtains close neatly.
How far should curtain pole extend beyond window?
This can be subjective and is influenced by obstructions around the window area. But as a guide the pole should extend about 15-20cm (6-8in) beyond the window recess on each side. And it should be fitted symmetrically relative to the window opening.
How long should curtains be?
Common lengths for standard curtain or drapery panels are 63 inches, 84 inches, 95 inches, 108 inches and 120 inches.
How to measure curtains?
To measure curtains: Determine the width of the area you’ll want the curtain (s) to cover. Multiply that number by 1.5. If you have a very wide window and curtains on either side and want them to meet in the middle, divide that number by 2.