How to Make a No-Sew Cord Cover
- 1. Assemble your ingredients: Fabric scissors, fabric, glue gun, glue sticks, and an iron (Smokey is not needed!)
- 2. Measure the length of your cord. Ideally, you should double the length to make it the perfect “scrunchiness”. This isn’t always necessary. Especially if you are using scraps. ...
- 3. Cut the fabric. ...
- 4.Iron. I ironed about 3/4″ on the short sides first. ...
- 5. Glue. ...
How to sew a piping cord?
How to overlap cording?
How to use a zipper foot?
How to cover a bias cord?
How to cut bias strips?
How to measure bias strip width?
How to measure for bias cording?
See 2 more
How do you make a fabric electrical cord cover?
2:096:11Make Your Own Electrical Cord Covers - Fabric Cord CoversYouTubeStart of suggested clipEnd of suggested clipFar end we'll so a couple strips of velcro to the outside surface of the cord cover this velcroMoreFar end we'll so a couple strips of velcro to the outside surface of the cord cover this velcro should be lined up so it's flush with the long edge of the strip.
How do you make a cord protector?
Begin by cutting a piece of electrical tape that will cover up the tears on the cord and gently wrap it around the areas that need to be covered. To guarantee the security of the tape, place an extra piece of electrical tape around the first piece and wrap tightly.
How do you make a fabric cord holder?
CORD KEEPERS INSTRUCTIONS:STEP 1: Download and print the cord wrap pattern. ... STEP 2: Cut fabric according to pattern. ... STEP 3: Fuse interfacing to the back fabric. ... STEP 4: Layer and pin fabrics. ... STEP 5: Stitch. ... STEP 6: Notch the curves. ... STEP 7: Turn right side out. ... STEP 8: Pin the opening.More items...
How can I cover my cord ends?
Use Cling Wrap Industrial strength pallet wrap is good way to weatherize your connections when using extension cords outside. Wrap the connection portion of the cords tightly, using as much of the plastic wrap as needed to keep out the water and prevent electric shock.
How do you cover exposed cables?
Other Ways to Hide Wires Bind power cords with tubing or cable ties. Place a decorative basket next to a table and insert the bound cords into the basket and out of sight. Use dark-colored plastic zip ties to attach power cords to furniture legs.
How do interior designers hide cords?
To hide electrical cords in the middle of a room, you can:Add some area rugs.Hide cords under furniture.Move cords under the floorboards.Add some cord protectors.Run electrical cords along your walls.Clip cords to your baseboards.Get some power strips.Hide electrical cords in baskets and boxes.More items...
How do you seal the ends of cotton cord?
Simply place the rope on a thick piece of glass or heat-resistant tile, plug in the knife, and push the blade gently against the fibres – approximately one inch above the rope end. By slowly moving the blade back and forth, it will melt through the fibres and heat seal them at the same time.
How do you cover kids cords?
Strap Cords Down Use tape to adhere them to the floor, or cover them with carpets. You can also use duct cord covers. Duct cord covers allow you to string multiple cords through a silicone or plastic cover that stays on the floor. This prevents children from tripping on or pulling long cords and damaging items.
How do you cover Christmas cords?
0:202:25DIY Simple Pop Bottle Christmas Light Cord Cover - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd once you have them in there just flip it over. And. There you have it or you can do it like.MoreAnd once you have them in there just flip it over. And. There you have it or you can do it like.
How do you protect your cords from cats DIY?
Wrap the cords in PVC tubing or rubber covers, which can be purchased from a home supplies store. Make the cords distasteful by coating them with solutions like homemade citrus or vinegar paste, lavender oil, or lime juice. You can also try “Bitter Apple,” a non-toxic deterrent spray sold in pet stores and online.
What can I use to cover an extension cord on the floor?
The Best Floor Cord CoversC2G CDI-5 Cord Protector.D-Line Floor Cord Cover.Cordinate Floor Cord Cover.Wiremold Floor Cord Management.X-Protector Overfloor Cord Protector.Yecaye Floor Cable Cover.Electriduct D-2 Rubber Duct Cord Cover.Protech Heavy Duty Cable Protector.More items...•
What tape is safe for cords?
Gaffer's tapeGaffer's tape is quintessentially used to tape down cables when preparing a stage or larger area for a concert or event – yet you probably won't be surprised by how often general-purpose duct tape is used for this purpose.
How do I protect my kids from cords?
Strap Cords Down Use tape to adhere them to the floor, or cover them with carpets. You can also use duct cord covers. Duct cord covers allow you to string multiple cords through a silicone or plastic cover that stays on the floor. This prevents children from tripping on or pulling long cords and damaging items.
How to sew a piping cord?
Begin sewing the cording onto your project about 1″ from the end, leaving a ‘tail’. Continue to sew until the ends are about to meet again. Stop sewing an inch or two from where the piping began . You can take your project out from underneath the sewing machine for now, as it will be easier to work with.
How to overlap cording?
One is to overlap the cording by crisscrossing the ends over each other. Begin by sewing the cord with it ‘hanging off’ the edge of the project,and on a gentle angle start lining up the raw edge of the cording with the project.
How to use a zipper foot?
Using a zipper foot attachment, line the edge of the zipper foot up against the cording as close as possible and begin to stitch. Remove the pins as you come to them, continuing to press the zipper foot against the cording, and making sure that the raw edges continue to line up as well.
How to cover a bias cord?
COVER THE CORDING WITH THE BIAS FABRIC STRIPS – Place the cording in the middle of the wrong side of the bias strip. Fold the strip around the cord, matching the raw edges, and pin, encasing the cording snuggly. Continue to do this until the entire cord is wrapped and pinned in place OR just go straight to the sewing machine and match the raw edges as you stitch.
How to cut bias strips?
Cut the bias strips with scissors or a rotary cutter following these lines. CONNECT THE FABRIC STRIPS – If you are making a project that requires a long length of cording, you will need to sew the bias strips together to make it long enough. The strips are connected at a 45 degree angle to cut down on bulky seams.
How to measure bias strip width?
The other way to determine the width of the bias strip is to lay the cording diagonally across the corner of a scrap piece of your fabric, wrap the fabric around the cord snuggly, pin it in place so it is encasing the cord and then measure the width of the seam allowance of your project from the edge of the cord, and mark this distance along the length of the cord.
How to measure for bias cording?
The quickest method is to wrap the tape measure around the cord mimicking a strip of fabric and adding the desired seam allowance to both sides of the cord. Make note of this distance, and this is the width of your bias fabric strips. It is easiest to make the cording seam allowance the same as your project so that when you apply the cording to your project, all of the raw edges will line up.
How to cover cords on a lamp?
While it’s a super easy cord cover DIY, it’s very stylish and spruced up your lamp. To cover the cords on different sconces, vary the pattern with different colors of yarn. If you want to do this simply cut one yarn color and tie your new yarn color and continue looping.
What to do with ugly cords?
Sometimes an ugly cord makes the room decor not harmonious and stands out too much. To avoid that, you may cover that cord with some fabric that fits your space decor. You could do this with burlap, colored fabric, patterned fabric, & so much more and you could do this with lamps, and any light, chandelier, any light with a visible cord or chain.
Can you cover a cord with burlap?
Covering the cord with burlap is extremely easy and fast – no special skills are required!
Can you hide cords?
Hiding cords is what we all strive to do: it makes your home much neater and more organized but sometimes you can’t hide them at all. How to spruce up a cord that you can’t hide? There’s an easy way to do that – just wrap or cover your cord with something! Here are some fast DIYs you can realize in minutes, enjoy!
Step 1: The Pattern
Ok, so there isn't some complicated pattern for this project that needs to be deciphered. It's one of those simple and easy patterns that we can envision in our heads. Measure the length of the cords you want to hide and we are going to make the cover twice as long.
Step 2: A Little More Sewing
To give the ends a finished look I folded over about 1" on each end and sewed it down.
Step 3: All Finished
To string the cords through the cover I actually used the piece of pipe again. I used masking tape to attached the cords to the pipe then pulled them through the cover. Even though I wasn't thrilled with the choice of fabrics, it did turn out looking nice in her room. The cover solve the tacky looking cords problem.
How to sew a piping cord?
Begin sewing the cording onto your project about 1″ from the end, leaving a ‘tail’. Continue to sew until the ends are about to meet again. Stop sewing an inch or two from where the piping began . You can take your project out from underneath the sewing machine for now, as it will be easier to work with.
How to overlap cording?
One is to overlap the cording by crisscrossing the ends over each other. Begin by sewing the cord with it ‘hanging off’ the edge of the project,and on a gentle angle start lining up the raw edge of the cording with the project.
How to use a zipper foot?
Using a zipper foot attachment, line the edge of the zipper foot up against the cording as close as possible and begin to stitch. Remove the pins as you come to them, continuing to press the zipper foot against the cording, and making sure that the raw edges continue to line up as well.
How to cover a bias cord?
COVER THE CORDING WITH THE BIAS FABRIC STRIPS – Place the cording in the middle of the wrong side of the bias strip. Fold the strip around the cord, matching the raw edges, and pin, encasing the cording snuggly. Continue to do this until the entire cord is wrapped and pinned in place OR just go straight to the sewing machine and match the raw edges as you stitch.
How to cut bias strips?
Cut the bias strips with scissors or a rotary cutter following these lines. CONNECT THE FABRIC STRIPS – If you are making a project that requires a long length of cording, you will need to sew the bias strips together to make it long enough. The strips are connected at a 45 degree angle to cut down on bulky seams.
How to measure bias strip width?
The other way to determine the width of the bias strip is to lay the cording diagonally across the corner of a scrap piece of your fabric, wrap the fabric around the cord snuggly, pin it in place so it is encasing the cord and then measure the width of the seam allowance of your project from the edge of the cord, and mark this distance along the length of the cord.
How to measure for bias cording?
The quickest method is to wrap the tape measure around the cord mimicking a strip of fabric and adding the desired seam allowance to both sides of the cord. Make note of this distance, and this is the width of your bias fabric strips. It is easiest to make the cording seam allowance the same as your project so that when you apply the cording to your project, all of the raw edges will line up.
