How to Make Glitter Tumblers
- Step 1: Prepare and tape your tumblers for the glitter. ...
- Step 2: (Optional) Spray paint your tumblers. ...
- Step 3: Put adhesive on your tumblers and glitter them. ...
- Step 4: Seal the glitter on your tumblers with a clear coat. ...
- Step 5: Prepare a way to rotate your tumblers while they cure. ...
- Step 6: Mix and apply high gloss resin to your glitter tumblers. ...
Full Answer
How to make a glitter tumbler?
How to make a glitter tumbler with epoxy. Step 1 – Tape off the top and bottom (optional) Step 2 – Spray paint your tumbler. Step 3 – Prepare your turner. Step 4 – Mix and add epoxy resin. Step 5 – Apply glitter. Step 6 – Optional: apply vinyl decal or more glitter. Step 7 – Apply the final coat of epoxy. Step 8 – Clean the ...
How do you add glitter to a glass mug?
Once the tumbler is dry, it is time to add the glitter. Make sure you have a container or wax paper underneath the mug to catch your glitter! I put a little bit of Mod Podge in a separate bowl and use a flat paintbrush to put it on. I “paint it on” so that the whole mug is covered in a uniform and smooth layer.
Can you put a decal over Glitter?
If you’ve worked with vinyl before, you know that decals stick really well to smooth materials. So if you’re going to be applying vinyl, even though it does delay things a bit, I recommend applying a layer of epoxy over the glitter, then the decal on top of that.
Can you spray paint glitter tumblers?
You can paint your tumblers, and I did this with three different kinds of paint. You don’t have to spray paint your tumblers first if you plan to use a lot of glitter, or extra chunky glitter. But if you use transparent or translucent glitter, you’ll want to paint first.
How do you put decals on glitter tumbler?
3:288:02How To Sand, Apply Decals, Finish Epoxy Glitter Tumbler - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing the weeding tool to keep the pieces. From lifting off of the transfer. Tape. Apply the decalMoreUsing the weeding tool to keep the pieces. From lifting off of the transfer. Tape. Apply the decal to the tumbler. This tumbler.
How do you make glitter tumblers with vinyl?
0:099:21Vinyl Wrap With Double Glitter Tumbler Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you've ever seen me work with vinyls before i prefer taking the backing. Completely. Off. OnceMoreSo if you've ever seen me work with vinyls before i prefer taking the backing. Completely. Off. Once i have the backing completely off i will layer it on the tumbler.
How do you make glitter tumblers for beginners?
InstructionsWash tumbler.Apply tape to top (and bottom - optional).Spray paint the tumbler if needed. Let dry.Apply a layer of mod podge with long even strokes.Dump glitter all over while you are turning the tumbler so the mod podge is all covered. ... Remove tape.Let dry fully (over night). ... Time to epoxy.More items...
What supplies do you need to make glitter tumblers?
Supplies for Making Glitter Tumblers with EpoxyStainless Steel Tumbler (I used a 20oz)Spray Paint.Painters Tape.Mod Podge.Silicone Brushes.Fine Glitter.Clear Coat Spray.Epoxy (Both A and B parts)More items...•
What do I need to get started making tumblers?
13:4124:44All the supplies you need to start making tumblers!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the last mandatory item that you need to start making tumblers is going to be spray paint when iMoreAnd the last mandatory item that you need to start making tumblers is going to be spray paint when i first started making spray paint i had one color and that was.
How do people make custom tumblers?
How To Make Custom Tumblers In 3 Different WaysVinyl Decals. Decorating using a decal is one of the easiest ways to personalize tumblers. ... Paint. Painting your DIY tumbler involves a few more steps than applying a decal, but it's still easy. ... Adding Glitter to Make a Beautiful Custom Tumbler.
What type of glitter is best for tumblers?
Best Glitter For TumblersIRIDESCENT GLITTER by Nicole Diary. ... COLOR SHIFTING GLITTER by Backfist Customs. ... COLORFUL GLITTER by Karizma. ... EXTRA FINE GOLD GLITTER. ... BLACK GLITTER by The Glitter Authority. ... VIBRANT GLITTER by Lisa's Bling Boutique. ... NEON & HOLOGRAPHIC GLITTER by Arteza. ... HOLOGRAPHIC GLITTER by Leobro.More items...
Do you have to spray paint a tumbler before glitter?
The first thing you want to do is to spray paint your tumbler. While technically not required, this is good for two reasons: Spray painting gives the glitter a different surface to adhere to; stainless steel is often smooth and stuff doesn't stick to it.
How do you put pictures on tumblers?
2:0522:23How to PUT PICTURES ON YOUR TUMBLER no waterslide ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipI brush them on the top of the surface. Get it down there then I take some more. And. I just brushMoreI brush them on the top of the surface. Get it down there then I take some more. And. I just brush it on the top of the image just to make sure you get a good coating.
Is it expensive to make tumblers?
You can DIY your own tumbler and spend less than $20, or you can look on Etsy to buy some as well. Let's say on average, it's going to cost you about $35 to get your cup Turner.
Which epoxy is best for tumblers?
Envirotex Lite Pour-On Epoxy Resin. ... Clear Casting and Coating Epoxy Resin. ... Art Resin Non-toxic Epoxy for Tumblers - Best in Food Safety. ... KS Resin Liquid Art Epoxy for Tumblers. ... FX Poxy Epoxy Resin Kit. ... East Coast Epoxy Resin for Tumblers - Best for Budget Crafters. ... Stone Coat Countertop Epoxy Kit.More items...•
How do you seal a glitter tumbler without epoxy?
There are various ways on how to seal a tumbler without using epoxy. You can apply CrystaLac, Mod Podge, or a clear acrylic spray instead. All have advantages and disadvantages, so choose the one that's most convenient for you.
What kind of printer do you need to make tumblers?
Epson EcoTank Printers are the most economical and easiest to convert and I cover the whole process in a blog post (and it includes a video!). It is possible to convert a used printer, but a brand new printer is easier and should produce better results.
How do you make custom tumblers with vinyl?
0:118:23How To Make a TUMBLER CUP with VINYL - YouTubeYouTubeStart of suggested clipEnd of suggested clipDesign space app. Now click on new project click on the word. Text then type in the word or nameMoreDesign space app. Now click on new project click on the word. Text then type in the word or name that you want on the side of your personalized cup for me i'm typing in the word director.
Do I need to seal printable vinyl before I epoxy?
12:1113:44How to Put Printable Vinyl on Glitter Epoxy Tumblers | Print Then Cut VinylYouTubeStart of suggested clipEnd of suggested clipAll you need to do is do at least one coat of epoxy over top the printable vinyl decal to make sureMoreAll you need to do is do at least one coat of epoxy over top the printable vinyl decal to make sure that the ink.
What do you need to make tumblers with Cricut?
Open the Wine Tumbler designs in Cricut Design Space....What You'll Need:Cricut Explore Air 2 or Maker Machine.Cutting Mat.Assorted Cricut Adhesive Vinyl – we used Adhesive Foil and Holographic Threads Premium Vinyl.Transfer Tape.Weeding Tools.Scraper.
How to make glitter tumblers?
Step 1: Prepare and tape your tumblers for the glitter. Note: Details on these steps are in my step-by-step video! Take off all of the labels and wash your tumblers. You may also wish to sand the outside of your tumbler, as may help any paint you apply stick to it better.
What do you need to apply glitter?
To apply the glitter, you need an adhesive. Some folks like Mod Podge, others like spray adhesive. I tested both to see what works best.
How to apply mod podge to tumbler?
To apply the Mod Podge, get a brush and put the Mod Podge on your tumbler in nice, even strokes. Make sure you don’t have too much globbed on in one section or the other.
How to keep glitter tumblers from dripping?
While the epoxy on your glitter tumblers is curing, you need a way to suspend your tumblers and keep them turning so they don’t drip. You can do it the low-tech way with a cardboard box, some PVC pipes, some dollar-store footballs, and duct tape, or you can step up your game with a tumbler turner we built from a rotisserie turner. I show you both up close in the video linked below.
What to wear when sanding tumblers?
Be sure to wear a respirator and gloves when you sand your tumblers to avoid epoxy contact, buildup, and potential allergic reaction.
How long to wait after applying glitter to tumbler?
And when you put on your epoxy, you need to have things a bit more in control. Wait about 30 minutes after applying sealer to your glitter tumbler before moving on to the next step.
What to do after taped tumbler?
After you’ve taped everything, you need to wipe the surface of your tumbler down with alcohol. This is important to get any dust or impurities, especially the adhesive from the labels, off of your tumblers. You want everything to stick, and the cleaner the surface of your tumbler is, the more likely that is to happen.
What step to go if you don't use glitter?
If you’re not using glitter you can move to the first epoxy step .
What machine do you use to cut a waterslide decal?
A Printer: If you’re planning on using a waterslide decal or printable vinyl. You can also use a Cricut or other brand cutting machine to cut your designs out after you print them.
What to use to protect the edge of a glass cup?
Painters Tape: Or electrical tape, to protect the drinking edge of your cups while you’re applying the glitter and epoxy. Just be sure you set a 30 minute timer and remove it from the edge of your cup before the resin has a chance to set too much.
Can you spray paint a tumbler turner?
A Steel Tumbler: Or other metal cup or water bottle. You’ll want to make sure that the size of the cup you plan to use will fit on your tumbler turner. If you plan to spray paint it with a base coat first, be sure to work outside and allow it time to dry before you get started. I didn’t give mine any base coats of paint, but you might want to if you’re working with very fine or light colored glitter. Having a white base coat will make them stand out better.
Can you make a tumbler turner online?
A Tumbler Turner: Whether you choose to buy one or make one, there are many options available online and in stores. I’m using an electric store bought turner, but there are also instructions online to make either a manual (hand cranked) or electric one if buying one isn’t for you.
Can you make epoxy tumblers?
The best thing about making these epoxy tumblers is that there is an endless number of choices when it comes to designing them, so you can match your personal style, whatever that may be! Being so highly customizable means they also make fantastic gifts. You can match their favorite sports teams’ colors or use waterslide paper to print out a decal of pretty much anything. There’s no end to the possibilities, and if you’re anything like me, you’re going to want to make quite a few for yourself too!!
Why make a DIY glitter tumbler?
As a lot of you guys know, a few years ago I stopped going into the office and transitioned into this strange state of being a work-at-home-mom.
Why is glitter tumbler so hard to make?
Some people find making glitter tumblers to be difficult because of all the waiting involved, they haven’t worked with epoxy before, or they don’t have a cup turner.
Why spray paint on tumblers?
The reason we’re starting with spray paint is that glitter will pop a lot more on epoxied tumblers if there’s a base coat of color on it. I prefer using matte paint because the epoxy will bring out a lot of shine, but play around with it, this is DIY!
How to make a tumbler turner?
Step 3 – Prepare your turner. Step 4 – Mix and add epoxy resin. Step 5 – Apply glitter. Step 6 – Optional: apply vinyl decal or more glitter. Step 7 – Apply the final coat of epoxy. Step 8 – Clean the tumbler and remove the tape. What to avoid. How to make your own epoxy tumbler turner. Conclusion.
How to get glitter off of a carpet?
Make sure you have something underneath the work area, like a newspaper or drop cloth. Work in an area where clean up is easy, where there are hard surfaces. Avoid carpet if you can, and working outside or in the garage is great. Lint-rollers make fast work of fine glitter if you have some spots you need to touch up.
How long does glitter dry?
Since I like a layered look, what I do is let it dry for around 12 hours, then apply more epoxy to the area I want to cover and add another layer of glitter. If you want to save time, do it all at once.
Can you use modge podge on tumblers?
Mod Podge can be really streaky and thick when applying, so we’re going to use the same epoxy we’re coating the tumbler with. If you have a spray adhesive, I’d go right ahead and use that. Similarly, if you have Mod Podge and are a master at applying it, it should work just fine.
How to make a glitter tumbler?
Prepping to Make a Glitter Tumbler. The first thing you’ll want to do is tape off the top and bottom ( if you want). The Alumilite is FDA approved but I still don’t like my mouth on it so I tape off the top. The epoxy also can break if it falls hard on the bottom edge so something to think about.
How long does it take to make glitter tumblers?
Just to forewarn you, making glitter tumblers is relatively easy but they take days to make! There is a lot of drying time and after you apply the epoxy you need to turn the glitter tumbler for a few hours so you have to do it on a day when you are going to be home.
How to apply HTV to mug?
The HTV was pretty simple to apply. Place it on your mug and use the tip of an iron to press it down. Keep moving the tip of the iron all over the vinyl until the plastic paper starts to pull up. I wouldn’t recommend a big design like this one on the 30 oz tumbler where it dips down.
Can you make stemless wine glasses with glitter?
You can also make personalized stemless wine glasses with glitter. Plus you can grab my FREE SVG and PNG Cheers file of eight different fonts!
Can you make glitter tumblers without epoxy?
Can you make glitter tumblers without epoxy? Yes! I have used mod podge to seal some glitter tum blers and they hold up well. They do have a different look to them and are not as smooth. You can see my comparison of the two methods here.
What glitter should I use for a sandbox?
You can use chunky and fine glitter . I recommend starting with chunky glitter and filling in the gaps with the finer glitter.
How to make a spinning cup pop?
Use heat gun or torch and quickly sweep it across your spinning cup. This will help the air bubbles to rise to the surface and pop.
How to get rid of a spinning cup?
Use heat gun or torch and quickly sweep across the spinning cup.
Can you use chunky glitter before fine glitter?
Now for the fun part! GLITTER! I like to use a variety of chunky and fine glitter. It is best to add chunky glitter before the fine glitter to allow the fine glitter to fill in the gaps more effectively. Just remember- it’s glitter, so it doesn’t have to be perfect! When all the glitter has been sprinkled on, gently pack it down with your hand (I wear clean gloves when I do this to prevent resin from sticking to my hand).
How to spice up tumblers?
Two things you can do to further spice up your tumbler are adding more glitter and placing decals.
What glue do you use to make tumblers?
After you’ve painted your tumbler, it’s time to add the first layer of epoxy. Some people use Modge Podge, a type of craft glue, for this part. But it can be rather clumpy and difficult to apply evenly.
What is an Epoxy Tumbler?
Quite simply, an epoxy tumbler is a tumbler that has been decorated using epoxy. The benefits of using epoxy is that it is a durable finish, one that won’t chip away over time.
What are tumblers made of?
These particular tumblers are made from stainless steel, which is durable and rust-proof, and also BPA-free. They are also insulated, keeping hot drinks hot and cold drinks cold.
Can you use a cup turner to apply glitter?
First, it makes it much easier to apply the glitter evenly. Of course, you can do this on your own by simply sticking your hand inside the tumbler and slowly applying the glitter. But a cup turner will just make it that much easier.
Can you make a tumbler with glitter?
At this point, you have successfully made a glitter tumbler! Congratulations! If all you wanted to do was add some sparkle to your cup, then you’re done.
Can you spray paint a tumbler?
If you do decide to spray paint your tumbler, make sure you tape it up first. Depending on the design of your tumbler, you may want to leave a strip at the top and bottom without glitter.
