- Begin by cutting the paper to size. Decide what size you would like your pendant to be and begin cutting several squares or rectangles of colored paper to that ...
- Add more layers of paper. Add more layers of colored paper, decreasing the size as you go. ...
- Make each layer smaller than the last. Keep adding layers of paper until your paper gemstone is the size and thickness that you would like.
- Allow the glue to dry. It takes about one hour for the white glue to dry enough so that the pendant is ready for sanding.
- Sand the edges. Use a nail file to sand the edges of your layered paper gemstone. Sand the layers smooth, rounding the corners down.
- Finish the jewelry. Wipe down each layered paper gemstone to get off any extra paper dust. ...
- Begin by cutting the paper to size. Decide what size you would like your pendant to be and begin cutting several squares or rectangles of colored paper to that size. ...
- Add more layers of paper. ...
- Make each layer smaller than the last. ...
- Allow the glue to dry. ...
- Sand the edges. ...
- Finish the jewelry.
How do I make a paper pendant?
Begin by cutting the paper to size Decide what size you would like your pendant to be and begin cutting several squares or rectangles of colored paper to that size. Use the white glue to add a thin layer of glue to the bottom paper (making sure to go to the edges of the paper), then place another square of paper on top. 2. Add more layers of paper
How can I turn paper necklaces into earrings?
I made layered paper jewelry necklaces. But you can also turn these into creative earrings just by changing the shapes and attaching earring hooks or make Pandora-style beads using a similar technique. Want more ideas like this? Subscribe today to get our weekly Ideas in Your Inbox newsletter plus other exclusive gifts and offers — all for FREE! 1.
What can I do with a piece of paper jewelry?
Each piece of layered paper jewelry will be entirely unique! It is fun to experiment with different colors, shapes and layers. These DIY pendants are a perfect, unique gift idea! This Rainbow Bead Necklace is another easy jewelry craft if you’re looking for more ideas!
How do you apply dimensional magic to paper jewelry?
This will add a shiny, hard coating to each piece of layered paper jewelry. Allow the Dimensional Magic to dry thoroughly for about 2 hours before going to the final step. Use the E6000 glue to glue on a bail. Allow to dry and then add the lanyard. Each piece of layered paper jewelry will be entirely unique!
How do you make paper pendants at home?
0:168:01How to Make JEWELRY out of PAPER! Easy Crafts to make AT HOME!YouTubeStart of suggested clipEnd of suggested clipVideo. So let's just get into it the first project i made were these origami star earrings for thisMoreVideo. So let's just get into it the first project i made were these origami star earrings for this project i used some printer paper mod podge a needle toothpicks glitter some 20 gauge wire.
How do you make a pendant out of paper?
1:215:47How to MAKE A ROUND PENDANT FROM NEWSPAPER FLYERS ...YouTubeStart of suggested clipEnd of suggested clipCover the cardboard shape with glue. And place a piece of brick. Like that and now cut around theMoreCover the cardboard shape with glue. And place a piece of brick. Like that and now cut around the shape about a half an inch larger. Than the circle. And then just score all the way. Around.
How do you make a pendant necklace step by step?
1:012:58How to Make a Quick and Easy Long Pendant Necklace for ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo very simply what I'm going to do is take a jump ring. And gently twist it to open it. And I'mMoreSo very simply what I'm going to do is take a jump ring. And gently twist it to open it. And I'm going to slip on both ends of my chain.
How do you make your own pendant?
1:017:56Make Your Own Art Pendant - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere. I'm just using a circular stencil. To make circles. So I can do my artwork. And if you don'tMoreHere. I'm just using a circular stencil. To make circles. So I can do my artwork. And if you don't have a circular stencil you can just trace around the pendant to get the approximate. Size you need.
How do you make paper bead pendants?
How to Make a Paper Bead NecklaceStep 1: Tear Out a Colorful Page of a Magazine. See image...Step 2: Cut Out a Long Triangle. ... Step 3: Flip the Triangle Over. ... Step 4: Put Glue on About an Inch of the Smaller End. ... Step 5: Roll the Triangle Up. ... Step 6: Repeat. ... Step 7: Cut Your String. ... Step 8: Knot a Clasp to the String.More items...
How do you make paper charms?
1:3517:55Making Charms From Paper Part 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey did not need to be as heavy as the necklace because you're gonna be hanging it from your ear.MoreThey did not need to be as heavy as the necklace because you're gonna be hanging it from your ear. So I had this chain I got from Joanne's.
How do you make wire wrap pendants?
11:0634:16Wire Wrap Pendant Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut this can be a little clumsy I'm sorry my fingers are getting in the way. But yeah just make yourMoreBut this can be a little clumsy I'm sorry my fingers are getting in the way. But yeah just make your little loop. And then you can hold it from there you actually get in with your bent nose pliers.
How do you make a drop pendant necklace?
0:064:23How-to: Make a Drop for Earrings, Necklaces and More! - YouTubeYouTubeStart of suggested clipEnd of suggested clipI want to take my bead. And put it on the whatta head pin and then here's the big trick. These areMoreI want to take my bead. And put it on the whatta head pin and then here's the big trick. These are called round nose pliers these are the big secret to get your loops.
How do you make a pendant necklace with string?
3:367:28How to Make a Unisex Leather Cord Necklace with Slide Knots - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow take your tail. And feed it up. Through all of your loops all four of them till it comes out theMoreNow take your tail. And feed it up. Through all of your loops all four of them till it comes out the other side okay grab that tail and pull squish your little loops together.
How do I make a picture pendant?
Steps:Scan two pictures (one picture for each side of the pendant) into the computer. ... Cut out the pictures and words. ... Cut a microscope slide in half using a glass cutter. ... Sandwich the image between the two pieces of glass.Wrap the edges of the glass with foil soldering tape.More items...
How much does it cost to make a custom pendant?
In general, you can expect to pay anywhere from $50 to $15,000 for a typical custom pendant. And while that range may not be very specific, it all comes down to the fact that you can essentially craft the piece entirely based on your budget specifications.
How do you make a homemade pendant light?
1:372:514 Easy DIY Pendant Lights | Glam It Yourself - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd cut an opening out. And then pop this through screw it on add the ball same routine as all theMoreAnd cut an opening out. And then pop this through screw it on add the ball same routine as all the others and hang it and now you have a really adorable shabby chic fixture.
How to Make Layered Paper Jewelry
This project works best using paper card stock or construction paper. Choose and experiment with lots of colors for unique looks!
Instructions
Decide what size you would like your pendant to be and begin cutting several squares or rectangles of colored paper to that size. Use the white glue to add a thin layer of glue to the bottom paper (making sure to go to the edges of the paper), then place another square of paper on top.
How to make a necklace with a crimp?
Adjust the two pieces of the necklace so that they are pulled tightly together, then crush the crimp. Repeat Step #11 for the second side of the necklace. Step 26. On each side of the necklace, pass the extra wire back through some beads and cut the extra slack so that it is fully hidden. Step 29.
How to make a tiger tail necklace?
Step 1. Layout your pattern and cut 27 inches of Tiger Tail. This will be used for the neck piece of your necklace. Step 2. Next, cut Tiger Tail for each layer of the necklace: 10” inches for the first top layer. 14” inches for the second layer. 16” inches for the third layer. Step 3.
How to crimp beads?
Crush the crimp. Crush the same crimp from the other side, folding it in the other direction. Step 15. Hold the strand upside down so that all of the beads go towards the closed crimp. Repeat Step #6 to position the crimp. Then repeat #7, while making sure the crimp is snug against the beads before closing it.
How to make a jump ring out of a tiger tail?
Insert all three layers of the Tiger Tail through the crimp. ...then the jump ring. Step 10. Fold over the Tiger Tail and thread it back through the same crimp. Step 11. Position the pliers around the crimp. Crush the crimp. Crush the same crimp from the other side, folding it in the other direction. Step 15.
How to make a tiger tail?
Insert the loose strands of the tiger tail back through the end-beads (metal disk and striped brass bead). Cut underneath the bead for a clean finish. Pass the tiger tail from the end of the top neck piece, through the jump ring on the bottom layered piece and wrap it around. Place a crimp over the doubled tigertail.