How to Make DIY Photo Coasters
- Paint the edges of the tiles. Paint the edges of your tiles with the white paint. ...
- Trim your photos down for your DIY photo coasters. ...
- Glue photos to center of tile. Next, Use a glue stick to glue the photographs to the center of each tile. Make sure you press down firmly.
- Prepare the resin. While the tiles are drying, begin to prepare your resin. ...
- Spoon out resin onto your DIY photo coasters. After you are done stirring, line up your tiles on your covered work surface and get ready to make some ...
- Repeat for each tile. Repeat for each tile. When completed, take a flashlight, get down low and examine each tile to make sure that you didn’t miss any ...
- Get rid of the little bubbles. If you have little bubbles take a deep breath and slowly exhale your hot breath over each tile. ...
- Wait for them to dry. Now you must wait patiently for the tiles to dry. ...
- Glue felt to the bottom of your tile coasters. Next, glue felt to the bottom of them to help protect your table. ...
- Enjoy your photo coasters. Package them up, give them as gifts, or put them to good use in your own home. ...
Are photo coasters easy to make?
These easy DIY Photo Coasters start with a simple tile, and transform into sweet keepsakes that make great thrifty gifts! Make some for yourself, and make some extras to give as a Frugal Gift Idea! So what are you waiting for? It’s time for another Fun Craft! Here’s what you’ll need to get started…
How do I use photos to decorate my tile?
Once the tile has dried, grab your photos… {black and white photos are also fun to use on this craft!} Trim photo into a square shape, to fit the tile. Now, be sure not to rush the project, and give it plenty of time. I made these over the course of several days, and allowed each coat to dry completely for many hours before applying the next coat.
How many coasters can I make with one sheet of tile?
You can make 8 coasters per pack of tattoo sheets (4 per sheet). I bought my tile at the hardware store for just $0.29 each! I think these make a great budget friendly handmade gift!
How do you glue photos to ceramic tile?
You want to ensure that the resin will fully seal the photograph down to the tile. Next, Use a glue stick to glue the photographs to the center of each tile. Make sure you press down firmly. Set aside to dry.
How do you make custom photo coasters?
How to Make DIY Photo CoastersStep 1: Paint the edges of the tiles. ... Step 2: Trim your photos down for your DIY photo coasters. ... Step 3: Glue photos to center of tile. ... Step 4: Prepare the resin. ... Step 5: Spoon out resin onto your DIY photo coasters. ... Step 6: Repeat for each tile. ... Step 7: Get rid of the little bubbles.More items...
How do you transfer pictures to coasters?
4:469:50How To Make Image Transfer Coasters With Mod Podge - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown onto the coaster like that yeah making sure it's all the way down and I'm pressing out any airMoreDown onto the coaster like that yeah making sure it's all the way down and I'm pressing out any air bubbles or any excess Mod Podge.
How do you make photo coasters waterproof?
You're going to want to coat the image and coaster with at least three coats of Mod Podge, allowing it to dry for 15 minutes (or until clear) between coats. Once the final coat has dried, spray all of the coasters with a clear acrylic gloss spray, which ensures that they're waterproof/drink proof.
How do you make a photo tile?
1:124:10DIY Photo TIles | #54 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo put down a layer of your Mod Podge. Take your photo and center it onto your tile. And you willMoreSo put down a layer of your Mod Podge. Take your photo and center it onto your tile. And you will have a little bit of wiggle room it's not going to dry. Super quickly so you can kind of push.
How do you print a picture on ceramic tile?
0:573:25Printing on Ceramic Tiles - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay take your ceramic tile glossy side face down onto the printed image. And just fold the bottom.MoreOkay take your ceramic tile glossy side face down onto the printed image. And just fold the bottom. And tack it with a piece of tape and fold. The top. And again another piece of tape. And.
How do you transfer a photo onto ceramic?
You can affix images to ceramic by using transfer paper and a standard home printer, or with regular printer paper and a bottle of Mod Podge. Using either method will give you durable, great looking results!
How do you seal photo coasters with tile?
0:523:11Use Tiles To Make Photo Coasters - Great Gift DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you're gonna want to glue them on to the tiles. So I like to use glue sticks now this is a heavyMoreAnd you're gonna want to glue them on to the tiles. So I like to use glue sticks now this is a heavy-duty glue stick you can also get a craft store make sure it's for paper and a permanent bond.
How do you Modge podge pictures onto tile?
10:5617:59MOD PODGE PICTURE TILE | DOLLAR TREE STAMP - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce that's really adhered do you want your edges to really be down on there. And once that hasMoreOnce that's really adhered do you want your edges to really be down on there. And once that has adhered to it you just go over it with more Mod Podge. And yes it's going to look cloudy.
How do you make tile coasters waterproof and heat resistant?
Apply Spray Sealer Apply 2 coats of a clear spray sealer to the coasters to seal and waterproof them. Make sure to do this in a well ventilated area. Spray the top, sides, and bottom side. Let the sealer dry for 20 minutes or so.
How do you print coasters at home?
0:321:59Printing on Coasters/Hardboards - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress you'll need a heat press your standard heat press will be just fine since these are flatMorePress you'll need a heat press your standard heat press will be just fine since these are flat surface products. And you're also going to need a coaster.
How many coats of Mod Podge do you need for coasters?
three coatsHow many coats of Mod Podge do you need for coasters? I would use at least three coats, letting dry for 15 – 20 between each.
How do you attach a picture to tile?
Hanging pictures on tiles with adhesive tape or hanging strips. Simple double-sided adhesive tape can be a good, simple and above all a very quick solution. With a double-sided adhesive tape you can hang small, lighter pictures securely and firmly on your wall without drilling a hole into the tile.
How do you print coasters at home?
0:321:59Printing on Coasters/Hardboards - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress you'll need a heat press your standard heat press will be just fine since these are flatMorePress you'll need a heat press your standard heat press will be just fine since these are flat surface products. And you're also going to need a coaster.
How do you print on ceramic coasters?
0:322:00Sublimation On A Ceramic Coaster - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress we're going to do paper sign down and back of the ceramic tile face up. Cover with your non-MorePress we're going to do paper sign down and back of the ceramic tile face up. Cover with your non-stick sheet. And close them off your heat. Press.
How do you put pictures on cork coasters?
Using a brush, apply Mod Podge/glue to a square of cork. Then affix photo to cork. Repeat for each photo and let dry.
How do you transfer a photo using Mod Podge?
Mod Podge Photo Transfer - Direct-to-Surface TechniqueStart by creating a photocopy of your picture using a dry toner powdered copier and cut it to size.Next, apply a thick layer of Mod Podge Photo Transfer Medium to image side of copy.Place on to surface face down. ... Allow to dry 24 hours.More items...
How to measure resin and hardener?
To help with this, you can create your own measuring device. Start by measuring out 1 ounce of water in a glass measuring cup and pouring it into a clear plastic cup. Then draw a black line with a permanent marker on the outside of the cup at the top of the water line. Pour the water out and then use this cup to measure out your resin and hardener.
How to get rid of drips on photo tile?
Next, lay down a towel to protect your work surface and the front of the photo tile. Then, turn the tiles over and remove the small drips from the back of the tile using a straight-edge razor blade. Apply gentle, even pressure when trying to remove the drips. Don't worry about getting it perfect, just get them as flat as possible.
How to measure water in a glass measuring cup?
To help with this, you can create your own measuring device. Start by measuring out 1 ounce of water in a glass measuring cup and pouring it into a clear plastic cup. Then draw a black line with a permanent marker on the outside of the cup at the top of the water line.
How to put pictures on ceramic tile?
Use a foam brush to apply a thin layer of decoupage medium to the back of the photos. Then adhere the photos to the top of the ceramic tiles. Cover with another thin layer of medium. Cover the edges completely to create a quality seal over the picture. Allow the glue to dry thoroughly.
How to make a photo tile?
Gradually pour the mixture over each of the photo tiles, generously covering each one. Spread it around gently with a small piece of cardboard to ensure even coverage. You can also try using the back of the plastic spoon you used for mixing. You'll want the mixture to drip over the edges to ensure the top is completely covered. Work as quickly as you can, as the mixture will harden over time.
How long does it take for a tile to cure?
Use a straw to blow gently on the surface of the tile. The carbon dioxide in your breath will pop the bubbles. Allow the finish to cure for at least 72 hours.
How to make a photo print on Instagram?
Step 1: Cut your photos down to size, 4 inches by 4 inches. Instagram photos work well for this project because they are already the perfect dimensions. Most photo labs do not offer a 4-inch option, so when you get them printed, choose the 4-by-6-inch option and trim off the excess. You can also use a regular 4-by-6-inch photo, cut down to size. ...
How to apply modge podge to a photo?
Apply Mod Podge to the back of the photo with a sponge applicator, then press down onto tile. Allow to dry completely. {note: make sure each coat dries completely before applying the next coat}
How many coats of sealer should I use on a coaster?
You’ll want a strong coat of sealer on each coaster. I applied a total of 5 coats of sealer, allowing each to dry completely overnight before applying the next coat.
What does Eric write in Turned Out Great?
Eric writes: “Turned out great! Super easy and fun to make.”
What scraps to use for backing?
Felt, Fleece or Cork scraps for backing + Hot Glue to attach the backing
Can you spray acrylic sealer on coasters?
It’s time to spray with Acrylic Sealer! Lay coasters on wax paper, or something else you don’t mind getting sprayed with some over-spray. The Acrylic Sealer is an important step ~ it will seal the project. This will ensure the coaster is waterproof, and can handle wet glasses sitting on the coasters.
Is it easier to become a photographer?
Becoming an AMAZING photographer is easier than you think , thanks to these little-known Photography Tips and Tricks for your phone and DSLR!
How to apply tattoo ink to photo?
When the ink is dry on the photos you printed, apply the adhesive sheet to the top of printed image by peeling away the green backing on one end of the page ( there is a thin green strip that can be pulled away at one end). Align it with the end of the printed tattoo paper and then peeling away the rest of the backing while smoothing the adhesive sheet down onto the paper.
How to make a tattoo with a photo paper?
Directions: Step 1: Print out your photos using the instructions on the temporary tattoo paper. You will want to use your photo paper setting and to flip the images in reverse so that they transfer facing in the correct direction.
How to put tattoo paper on tile?
Make sure you have it lined up properly before letting the tattoo paper touch the tile. You won’t be able to reposition once it is laid down. Use your scraper tool to firmly push down the tattoo paper on the tile.
How many coasters per pack of tattoo sheets?
I use printable temporary tattoo paper which is easy to use and leaves you with flawless results! You can make 8 coasters per pack of tattoo sheets (4 per sheet). I bought my tile at the hardware store for just $0.29 each! I think these make a great budget friendly handmade gift! You can make a set of 4 of them for right around $5.00.
How do I glue felt to tile?
The glue will dry quickly so I usually put hot glue on one edge of the felt, lay it on the tile, then lay glue down on the tile line by line, laying the felt down on top of the glue, working my way from one edge of the tile to the other. Viola!
What to do if you can't see through the paper?
If you see white spots where the paper is still dry and you can’t see the image through the paper, cover again with the wet cloth until you can see the image.
How to make picture tile coasters 54
Picture tile coasters make great gifts for Mums or Grandparents and are so easy and fun to make.
How to make picture tile coasters
Being 4 inch square the photo’s from the Fujifilm Pop Books are the perfect size to make picture tile coasters. We popped them on to some cheap tiles that I had to make coasters for Grandma for Mother’s Day.
How to paint a barcode on ceramic tile?
If your ceramic tiles have tan sides or an obvious barcode printed on one of the sides, you may wish to paint the sides with white paint. Using the foam brush, brush a light coat of mod podge onto the tile and then lay your photo on top, pressing down a bit so the photo sticks to the tile. Let dry for several hours, or preferably overnight.
What size paper do I use for coasters?
For all my coasters I used black and white photos printed on 4×6 photo paper, which I then trimmed down to size to fit on 4″ square ceramic tiles.
How to finish a coaster with acrylic sealer?
Spray a light coat of acrylic sealer over your coaster to finish up the top of your coaster. Finish up the underside of your coaster by cutting a piece of the adhesive backed felt to the size of your coaster and sticking it on.
Can you put mod podge on top of sealant?
However if you want to stay more true to the black and white tones, you can try not putting on the top layer of mod podge, and instead just spraying on a couple layers of the sealant. In the comparison photo below you can see the difference between the two finishes.
Can you paint ceramic tile with a barcode?
Also if your ceramic tiles have tan sides and/or have a barcode printed on one of the sides, you may wish to paint them with some white paint.
