how do you make portland cement flower pots

1. Pour some of the Portland cement mix into a shallow container. Add water a little at a time and mix your concrete. ...
2. I used cut scrap pieces of plywood for my larger planter pots and styrofoam cups for my smaller pots. ...
3. Cut a piece of drop cloth to size making sure you have enough on all sides to make it as tall as you want.
4. Dip your drop cloth in the concrete mix making sure it is completely soaked.
5. Squeeze out excess cement. You want it thick on the fabric but not running off of it.
6. Set it on top of your plastic covered container. Level it out and fold the corners however you want. ...
7. Then wait two days until it fully dries. You can tell it is dry when the entire piece is a light gray color. Remove pot from plastic.
8. I added some rope around my big pots to give it added stability and a little flare but you don’t have to. ...
9. Drill drainage holes at the bottom.

How to make a planter with Portland cement?

I made little pots that are suitable for one flower and also a larger planter. 1. Pour some of the Portland cement mix into a shallow container. Add water a little at a time and mix your concrete. Keep adding water and mixing by hand, getting out all the clumps, until it is the consistency of thick mud.

How do you make a flower pot out of concrete?

For concrete flower pots, add a generous amount to the exterior larger form until almost filled to the top. Then nestle the interior form into the concrete, pushing out excess cement. If using a plywood form, nestle the interior form upside down in the larger shape before adding concrete. This will make a large planting container.

How do you mix Portland cement with sand?

The concrete is made of two parts sand to one part Portland cement by volume and you do not have to be perfect just close. As with any concrete use protective gear so as not to breath cement dust. And gloves when mixing. You should always mix the dry ingredients first before adding water.

What is the best cement mix for DIY planters?

Portland cement is another good cement mix for DIY planters. But you must add sand to it, otherwise, it won’t bind. Using a smooth cement mix to achieve smoothness in a planter is important. But also keep in mind that you must also make sure to mix the cement or concrete so that there are no lumps.

What do you mix with cement to make flower pots?

A typical cement pots recipe is two cups of concrete or cement and about half a cup of water. This is the proper ratio for many mixes- if you are making a small planter.

What is the ratio of sand and cement for flower pots?

From Cement Measure 2 part cement and 3 parts sand, and mix them really well. Pour a small amount of water into the sand and cement mixture and mix them well with the water, pour more water if the cement mixture is too thick. Make sure the mixture isn't too thick nor too thin.

How do you make strong concrete pots?

0:035:17How to Make a Large Concrete Planter - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd today we're going to make a concrete flowerpot. Using this bag of concrete. This will be my veryMoreAnd today we're going to make a concrete flowerpot. Using this bag of concrete. This will be my very first time working with cement or concrete. So this is going to be interesting bear with me.

How do you make a homemade concrete planter?

0:002:42DIY Concrete Planter,, Episode 16, HomeMade Modern - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere's what you need to get started an old cabinet made from melamine or laminate two bags ofMoreHere's what you need to get started an old cabinet made from melamine or laminate two bags of quikrete 5000 rigid foam insulation spigot a piece of threaded brass pipe some heavy-duty casters.

How much sand do I mix with Portland cement?

Use a ratio of 3 parts sand to 1.5 parts cement. Adding hydrated lime to the mixture will reduce shrinkage cracks. It will also make the mortar more waterproof. If you add lime, the mixture will be 15 gallons of sand, 6.38 gallons of cement and 1.12 gallons of lime.

How do you mix Portland cement?

Normal ratio is 1 part cement, 2 parts sand, and 3 parts gravel (trade the word part for shovel, bucket, or any other measuring device). # Begin adding water to the mixture slowly, mixing continuously until it becomes plastic enough to place in your form.

Why are my cement pots cracking?

Shrinkage is a main cause of cracking. As concrete hardens and dries it shrinks. This is due to the evaporation of excess mixing water. The wetter or soupier the concrete mix, the greater the shrinkage will be.

How do you make decorative concrete pots?

3:007:46DIY Concrete Planter - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe more you coat it the stronger the container is going to be as a final product. Before you drapeMoreThe more you coat it the stronger the container is going to be as a final product. Before you drape your cement coated towel over your mold you want to first place a plastic bag over the mold.

How do I make my concrete planters durable and lightweight?

0:586:23How to DIY concrete planters using only 2 materials - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou don't have to build forms. Okay we're gonna make these so simply now yeah I've already mixed yesMoreYou don't have to build forms. Okay we're gonna make these so simply now yeah I've already mixed yes I've got to use some snazzy gloves to put on there like the prettiest gloves I've ever had.

How do you make concrete molds for planters?

0:217:53DIY Concrete Planters Cast in REUSABLE MOLDS - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn. To get complete enclosure I ended up using 20 pieces of pipe I trimmed off a bit of the vinyl.MoreIn. To get complete enclosure I ended up using 20 pieces of pipe I trimmed off a bit of the vinyl. And then started getting ready to pour the concrete.

Do you need to seal concrete planters?

Do concrete planters need to be sealed? Concrete pots only need to be sealed if you are growing a plant in the pot that needs more acidic soil. You see, concrete contains lime which can cause the soil to become alkaline. This is a good environment for succulents, but many plants will not be happy in this soil.

Are cement pots good for plants?

Cement pots are good for plants because they are durable, porous, and provide insulation. You will need to leach out the lime from cement pots before use. Or the lime will increase the pH level of the soil and cause harm to some plants.

With over 23 million views, this practical DIY planter tutorial is a must-see

All you need to start this project is a plastic basket, cement, and tape. Yep, that’s it!

Grab your favorite plastic basket or pick one up at the Dollar Store

It is best to use one with a pattern and choose a size that you prefer. The basket in the tutorial is a nice large bowl-shaped basket with a simple yet stylish pattern.

Next, grab some tape and cover the outside of the basket to create a barrier

After taping the basket, use some oil to coat the inside of the basket. This will help your finished product to easily slip away from the mold.

Time to mix the cement

If you’ve never tried to mix cement, you are in for some fun. Apply a thin coat of wet cement to the inside of the basket. Then mix water with one part cement and one part sand to create a thicker mixture.

Smooth it out with a curved spatula or similar tool

Once you have smoothed it out, you can grab a knife or sharp tool for carving so the cement is even around all sides.

Use a tool to make a small hole in the bottom of the planter so water can drain from the soil

All that is left to do is wait and daydream about all the stunning flowers that will be growing in your gorgeous new DIY planter.

Time for the big reveal

After waiting all those long hours, it is finally time to see how your planter turned out. Gently turn the bowl upside down until the final product slips from the mold.

How to make a mold for a pot?

Place a handful of the cement mixture in the bottom of the mold. Smooth it over the bottom, adding more as needed until the bottom is 1 1/2-inches thick. Push a plastic soda bottle cap into the mixture to make a drainage hole for the container. Make multiple holes for pots larger than 12 inches wide.

What is a perlite flower pot?

Concrete and perlite flower planters, known as hypertufa, provide a low-cost alternative to expensive clay pots. The perlite provides texture to the cement and gives the planter a natural look that resembles stone. The pots don't require skill to create, although they do take time. Make the pots as a winter project so they are ready ...

How to make a mold out of plastic?

1. Prepare your mold. Line a plastic pot or cardboard box with a plastic garbage bag. Smooth out any wrinkles in the bag, and tape the bag to the mold to hold it in place, if necessary.

What to wear when mixing cement?

Wear gloves and a face mask when mixing the cement, peat and perlite to avoid inhaling fine dust particles. Writer Bio. Jenny Harrington has been a freelance writer since 2006. Her published articles have appeared in various print and online publications.

How to grow hypertufa in rain?

7. Set the hypertufa pots outdoors in rainy weather for 10 days prior to planting. Alternately, soak the pots with a spray of water three times daily for 10 days. Water leaches alkalinity from the pots, which can otherwise affect plant health after planting.