how do you make silverware wind chimes

DIY Wind Chimes | How To Make A Silverware Wind Chime

• Step 1: Flatten The Silverwares ...
• Step 2: Cut And Drill ...
• Step 3: Start Working With Your Fork ...
• Step 4: Build The Hanger ...
• Step 5: Assemble The Beads ...
• Step 6: Connect The Spoon’s Head And Handle ...
• Step 7: Attach The Spoon To The Fork ...

Full Answer

Can you make a wind chime out of silverware?

Turns out there are just six easy steps to create your own lovely wind chime out of silverware. Let me show you how. The other day I was really lucky at a flea market nearby. I came home with lots of vintage silverware that looked old, tattered and lovely. It led of course to the question: What can I make out of old silverware?

How do you make a wind chime?

Just make a triangle first by putting together the three equal sizes of brass tube, pass the metal wire through to keep them in shape and end the top with a hoop. Next, hang it over and install the wind chime hangings as you can see. Complete project details and instructional guides are here ehow

How do you hang a wind chime on a sifter?

Just drill tiny holes in the bottom side of the sifter and then add split rings to those holes, next add custom metal chain lengths to those split rings holding some steel spoon in their bottom ends. The final step would be to hang this vintage wind chime aloft for amazing decor statements.

How to install a wind chime on a fork?

Begin by drilling the hole for hanging the entire wind chime. This hole should be placed in the handle of the fork, very close to the end. Select a very small drill bit for this job - preferably 1/32 inch (0.8 mm) or smaller.

How do you make a wind chime out of silverware?

1:403:14Make Your Own Wind Chime! - Do It, Gurl - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep 2 once you've flattened all of your silverware. Use your super glue to attach one bail to theMoreStep 2 once you've flattened all of your silverware. Use your super glue to attach one bail to the end of each piece step 3 once your super glue has dried thread.

How do you make metal windchimes?

0:185:07Make Your Own Wind Chimes - The Great Outdoors - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then using a pipe cutter. You know to cut that piece off of there you could use a hacksaw. But.MoreAnd then using a pipe cutter. You know to cut that piece off of there you could use a hacksaw. But. I find that this works a lot better quite a bit faster. Each time you go around tighten.

What is the best material to make wind chime out of?

One of the best parts of DIY wind chimes is that almost any material can work, though metal and wood are typically the most preferred. Of the metals, Brass is the most prized because of its sound and timbre. This is the same reason why brass is typically used in musical instruments.

What is the best metal to make wind chimes?

Aluminum: By far the most popular material due to the clarity, volume, and duration of its chimes, as well as its superb durability and weather resistance. Steel: Often recycled into affordable and durable bell-style chimes.

What is the best tube for wind chimes?

Stainless steel pipes are one of the best materials to create your wind chime from. They are durable and long-lasting. They also make for a beautiful sound that only adds to the aesthetics of your home.

What can I use to make a wind chime?

Examples of items you can use as chimes:Pieces of metal pipe (sound like traditional wind chimes)Pieces of plastic pipe (a soothing clacking sound)Bamboo sticks (lovely clunking noise)Old tiles or old broken bits of tile or pottery (these can make a very pretty clacking sound)Seashells.Pieces of heavy glass.More items...•

What makes the best sound for wind chimes?

Metal produces a sharp, crisp tone. Some metal wind chimes may also play specific musical notes. Wood, bamboo, and glass, on the other hand, create subtler tones. Bamboo and wood, in particular, make a dull sound.

What is the thing at the bottom of a wind chime called?

Sail. The sail is the part of the wind chime that hangs down at the bottom of the suspension cord and catches the wind to drag the striker into the wind chime tubes.

What makes a wind chime deep?

The common materials for deep tone wind chimes include wood, metal, and glass. These three materials produce melodies with deeper, resonating tones than the materials that make up higher-toned wind chimes.

What is the deepest tone for wind chimes?

Bass tuned refers to a musical range or section that is the lowest of our wind chime tunings.

How many rods should a wind chime have?

To enhance good energies, wind chimes with 6 or 8 hollow rods are the best bet.

What kind of wire do you use for wind chimes?

1.5mm Nylon Cord Multi-Use Extra Strong Braided String Thread for Wind-Chime Repairs Jewelry Making (Black, 100 yds)

How many rods should a wind chime have?

To enhance good energies, wind chimes with 6 or 8 hollow rods are the best bet.

What materials are used to make chimes?

Novelty wind chimes are made with brass, bronze, copper, or bamboo tubes. In place of tubes, they may make music with suspended shells, clay pottery shapes, die-cut metal pieces, glass, or other tinkling objects.

What kind of cord is used for wind chimes?

The Paracord string is made from nylon and has a tensile strength of 90 pounds. The package includes one spool of 1.18 mm thick string. As for the length, you can choose from many options ranging from 3 to 300 yards. Overall, the nylon string is incredibly durable and will perform excellently as a wind chime cord.

Where should you place silverware in a colander?

You should position one piece of silverware in the middle of the bottom of the colander and the other pieces will be positioned 2-3 inches out from the center piece in a circle.

How to crimp a knot?

Slide your tube shaped crimp bead through both ends and position it just above the knot. Use your set of pliers to crimp the tube down (it compresses and holds the line firmly together). This should give your line extra strength should the knot loosen up at some point.

How to tie fishing line in a colander?

Run both ends of the fishing line up through adjoining holes in the colander (one end of the line through one hole and the other end of the line through an adjoining hole) and tie together on the other side.

Is Kitchenware taking over Goodwill?

Kitchenware is absolutely taking over my local Goodwill. I think people are doing some spring cleaning and just want all the extra stuff out of their house. Now.

Can you glue bails on the back of silverware?

I totally understand that not everyone has access to drills and drill presses and everything that your basic Harbor Freight store carries, so you can simply glue bails onto the back of the silverware if you want to do it that way.

Why do people use wind chimes?

In Asia they have been around since ancient times as well. Wind chimes are considered to bring good luck and are used in Feng Shui. If you know what you are doing when creating your wind chime you can make them play certain notes.

What can I make out of old silverware?

I decided to make something for my garden. Something to add a little music to my life. Something whimsical and fun. I made wind chimes out of the vintage cutlery and as it turned out that was a fun project that was much easier than I imagined.

How to bend a pliers?

First to the front, back, front and back and then bend the two outers ones to the side (step 1 and 2) go gently and keep moving the pliers up and down along the tine so it won’t break. Then with the needle nose pliers bend the tips upwards (or downwards, your choice).

Can you make wind chimes play certain notes?

If you know what you are doing when creating your wind chime you can make them play certain notes. Apparently there are formulas to determine exactly how long the ropes should be.

Does flatware sound flat?

No, not at all. Flatware doesn’t sound flat. It tingles and jingles quite nicely. But it definitely helped that I flattened the spoons, that gave a much nicer tone.

How to make a silverware hanger?

First you need to prepare your silverware for its new function. Choose a nice big fork to function as the main ‘hanger’ . With the flat nose pliers bend the tines. First to the front, back, front and back and then bend the two outer ones to the side (step 1 and 2).

How to secure a hoop?

Basically tie a little knot, then run one of the loose ends through the hoop twice and then tie another knot. This should secure it, but for extra safety you can put a little glue on the knot too.

What are wind chimes made of?

As I mentioned earlier, you can see in the photo below that the handmade wind chimes are made with recycled cutlery, a sugar bowl, and a small plate from Goodwill. If you can't find a ceramic sugar bowl, alternatively you could use a teapot like I did for these recycled teapot wind chimes.

How to hang a chimes on a plate?

First, we need to hang the flatware chimes onto the plate. Slip 14-inch strands of stretch-free jewelry thread (or fishing line) into the holes of the flatware and tie in a double knot. String a green colored bead about 1-inch from the top of the flatware and double loop through the bead to keep it from slid ing.

Why are wind chimes recycled?

We live behind a busy road and the motivation for making recycled flatware chimes is to deafen the constant hum of traffic. The pretty soft melodic sound of these wind chimes provides a pleasant distraction from the noise.

How to tie a cord to a keyring?

Tie the opposite end of the cord onto a keyring about 10-11 inches from the handle with a square or granny knot and cut off the excess.

What do you wear when drilling holes in a plate?

It's important that you wear safety glasses and protective gloves when drilling holes in the plate and the flatware.

Can you make wind chimes with food tins?

Here's another idea for bright and whimsical homemade wind chimes you may like. These recycled tin can wind chimes are easy to make with food tins and a collapsible vegetable steamer basket.

How to make a silverware handle?

Step 1: Flatten The Silverwares. Position your silverware on a flat sturdy surface and hammer down the curved shape of the silverware until you’re satisfied with its flatness. Also pay attention to the handle, to make sure that you are also straightening it out.

How to attach beads to spoons?

Simply attach the assembled beads to the hole of both spoon’s head and handle to reconnect them. Attach another set of assembled beads to the other hole of the handle as dangling embellishment. Do this on all four spoons. This is just like solving a puzzle, connecting the pieces all together.

How to separate a spoon handle?

Separate the head of the spoon from its handle by cutting it with a Dremmel or whatever cutting tool you have available . Then, drill a hole on both ends of the spoon handle. Also, make similar holes on the spoon’s head and on the fork’s handle. Make sure to drill the hole close to the very end portion.

How to make a wind chime out of copper?

Drill holes in the very tops of copper tubes and also in the center of a ceramic cup, use a ceramic drill bit for it. The final step would pass the string through the holes, making a cool looking wind chime as you can see. Don’t forget to add the wooden beads for extra charm and beauty of the wind chime.

How to make a wind chime for Valentine's Day?

Make mesmerizing wind chimes by using dried driftwood and organized clay shapes, add beads for bringing more focal stimulation to your design. Melt the beads and turn them in heart shapes using heart molds! Once through that, now strung them up on a rustic tree branch getting a romantic wind chime for the Valentine’s Day. Ta-dah here is your great love gift for this V-Day!

What is wind chimes?

Wind chimes are among one of the most impressive kinds of decor art! They not only enchant you with their colorful and vibrant appeals but also soothe your nerves by singing sweet melodies.

How many loops are there in a fairy wind chime?

Here a thick metal wire has been twisted in round shape and provides eight loops for wind chime hanging. You can take as a top wind chime frame.

What to make with old earrings?

Go handmade also with your old earrings to make cool looking wind chimes also. Checkout here a mind-boggling sample that is made of old earring shells, bamboo hoop, and clamshell beads.

Is a driftwood wind chime rustic?

Looking for an ultra rustic wind chime that will bring a rustic touch to your spaces or interior decors? If yes, then going with driftwood would be a great low-cost option. So, presenting here a lovely driftwood wind chime, crafted to rock and inspire and is as rustic as you want.