Easy Pants for the Beginner
- Materials. A sewing machine. ...
- Making the Pattern. Fold your pants in half so both sides of the front are facing out. ...
- Cutting the Fabric. Pin your cutout patterns to the cloth. ...
- Sewing the Inseam. Put the two front pieces together so they are lined up and sew the inseam. ...
- Sewing the Sides. ...
- Making the Waistband. ...
- Hemming the Pants. ...
- You're Done. ...
Full Answer
How to make your own towel pants?
Towel Pants
- Supplies
- Make a Pattern. Find a pair of pants the size you want the towel pants to be. ...
- Cut the Towel. Fold the towel so the edges of it meet in the middle.Then you will only have to sew one side. Pin the pattern on top.
- Sew. Fold the legs in half with good sides together. ...
- Waist Band. Fold over the waist. ...
- Done. Enjoy your new towel pants! ...
How to make your own harem pants?
How to Make Baby Harem Pants
- Using your main fabric, cut out the front and back pieces of your harem pats.
- From the contrast knit fabric, cut the waistband and leg cuffs. ...
- Begin assembling your harem pants. ...
- Sew the pieces along the outside legs and inside the curved leg with 3/8-inch seam allowance.
- Turn the sewn piece inside out and press.
How to make an easy waist coat?
Tutorial for making a waistcoat
- Cut out all outer and lining pieces and transfer all pattern markings including stitching and cutting marks for the pockets. Interface fronts, front facings, and pocket welts.
- Seam allowances are 0.5cm throughout the welt construction, returning to a standard 1.5cm for the pocket bag.
- Fold pocket welts along the marked fold line, right sides together. ...
How to take in waist of pants?
- Step 1: If there is a belt loop over the center seam on the waistband, remove it carefully using a small nail scissors or seam ripper.
- Step 2: Turn your pants inside out, and try on your pants. ...
- Step 3: Remove the stitching that holds down the inside facing of the waistband about 5-6 inches (12.5-15 centimeters) on each side of the center seam.
How do you make a simple pair of pants?
0:265:10How to make pants (easy) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you want to make sure that for the waist that when you fold over that you have enough room toMoreAnd you want to make sure that for the waist that when you fold over that you have enough room to insert the elastic. So all I'm doing is finishing up the pattern.
How do you draft your own pants?
1. Draw a right-angle using your ½ hip measurement + 2cm of ease for the width, and waist to ankle measurement for the height. In this example, the width is 50cm and the height 104cm. Then add the other 3 measurements: waist to hip, crotch depth + 1.5cm of ease, and waist to knee.
How do you draft a basic pants pattern?
6:5515:02DIY Basic Pants Pattern|How to Draft A Pant Pattern - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor the front i measure my front waist arc plus one and a quarter inches. I also come in threeMoreFor the front i measure my front waist arc plus one and a quarter inches. I also come in three inches. Then half an inch another one inch and a quarter for dust spacing. And finally another half inch.
Can you make pants without a sewing machine?
0:205:55How To Tailor Pants Without Sewing Machine // Tapering & Hemming DIYYouTubeStart of suggested clipEnd of suggested clipHere are the tools you'll need to get started a sewing needle a thread that matches your trouser.MoreHere are the tools you'll need to get started a sewing needle a thread that matches your trouser. Fabric. Safety pins sewing pins a fabric pencil or chalk a seam ripper a ruler. And an iron.
How do you make women's pants?
7:2221:36HOW TO MAKE WOMEN TROUSER (WITH POCKET) - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can fold it when you are cutting. And you know fold and cut it together and this is just to makeMoreYou can fold it when you are cutting. And you know fold and cut it together and this is just to make sure that when your hemming your pants. You don't fall short of fabric.
How do you cut womens pants?
14:0126:25HOW TO CUT A FEMALE TROUSER - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe front so what i'll do now is to just cut make sure the width is like two inches.MoreThe front so what i'll do now is to just cut make sure the width is like two inches.
How do you hand sew pants?
0:521:59HOW TO HEM PANTS BY HAND | Sewing By Hand for BeginnersYouTubeStart of suggested clipEnd of suggested clipMake sure that you don't sew through both legs at your pants because in your pants will get sewnMoreMake sure that you don't sew through both legs at your pants because in your pants will get sewn together. Working from the inside. Bring your stitch and needle back. Out. You've completed one stitch.
How do you cut and hem pants?
0:021:44How to Hem Pants : Cutting Excess Fabric for Hemming Pants - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just cut it right along that very bottom chalk mark that you used that you had marked on there.MoreAnd just cut it right along that very bottom chalk mark that you used that you had marked on there. And just like to flip the pants over and just do one side of one leg at a time and.
How do you make trousers without a pattern?
0:239:59How to Sew Pallazo Pants without a Pattern -DIY Ankara TrousersYouTubeStart of suggested clipEnd of suggested clipSo i cut two of these pieces and then i fold them over in half. And then onto the inside seam i justMoreSo i cut two of these pieces and then i fold them over in half. And then onto the inside seam i just put some. Pegs.
What body measurements are needed to draft the waistband?
Decide how wide you would like your waistband to be - consider a measurement around 3 - 6cm (1 1/4 - 2 1/4in). Draw a perpendicular line from either end of your original line, the height of your waistband. Complete the rectangle by connecting the end points of the lines drawn in the previous step.
How do you draft mens pants?
4:2545:44How to draft a men's pant pattern ... and fix fit issues! - YouTubeYouTubeStart of suggested clipEnd of suggested clipI also want to draw a perfectly perpendicular line at the top at a 90 degree angle so that's whereMoreI also want to draw a perfectly perpendicular line at the top at a 90 degree angle so that's where one of these rulers. Really comes in handy. At the top here at the intersection of the tee.
How do you draft jeans?
To draft pair of jeans, I have traced off my basic pants sloper and placed them on a large piece of paper, aligning the crotch line and hipline and making sure that the grainlines are parallel to each other. At the fullest part of the side seam, square a line from this point (side seam) to the center front.
How do you draft a measurement pattern?
0:172:41Sewing Patterns - Flat Pattern Drafting, How to Take MeasurementsYouTubeStart of suggested clipEnd of suggested clipSo first of all you need the measurement. Around the fullest part of the bust. This rises a littleMoreSo first of all you need the measurement. Around the fullest part of the bust. This rises a little at the back this measurement will also be used to determine some of the variables.
Tips
Always look at your material and think carefully before you sew a seam: Do I have right sides facing in? Am I sewing a front together with a back, or am I sewing two fronts together?
About This Article
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 22 people, some anonymous, worked to edit and improve it over time. This article has been viewed 247,969 times.
Prepare Your Fabric
You'll want to choose fabric that's woven, like cotton, flannel, or linen. (This example uses linen.) You'll need 3 yards of the fabric. If the fabric isn't pre-washed, wash it and dry it before you start to work with it. A quick pass with the iron will help take out the wrinkles.
Trace Around Your Pants
Take one piece of fabric and fold it in half lengthwise, so the fabric is wrong side out. Lay the pair of pants you'll be tracing on the fabric, with the outer seam of the pants lined up with the fold of the fabric. The pants should lay flat, with the crotch pulled out.
Cut Out Your Pant Pieces
Cut carefully around the markings you made to cut out the pant leg. Do NOT cut along the fold of the fabric.
Sew the Pant Legs
Starting at the crotch and ending at the bottom of the pant leg, pin together the inside of the pant legs. Use your sewing machine to sew a straight stitch with a 1/2-inch seam. Leave 1/2 inch before you start sewing the crotch.
Sew the Crotch Seam
Turn one of your pant legs right side out. Take the other leg (the one that's wrong side out) and put it inside the right side out pant leg.
Measure for Elastic
Take your measuring tape and put it around your waist. Add 1 inch to that measurement. Cut a piece of elastic that size.
Sew Your Elastic Waistband Casing
Turn your pants so they are inside out. Fold the top edge of the waist down 1/4 inch and then press. Fold the edge down again, this time 1 1/4 inch. Press well. Sew along the bottom of the folded edge but leave a few inches in the back of the pants unsewn. This forms the casing for your elastic.
Step 1: Materials
You will need: A sewing machine. A sewing machine is not essential but it will make your life a good deal easier. It doesn't have to be anything fancy and you could probably get one at your local used store for less than $30. Another option would be to borrow it from a friend.
Step 2: Making the Pattern
Fold your pants in half so both sides of the front are facing out. Make sure the seams on the side are on the edge and then place them on your piece of paper. Trace a line a half inch away from the pants and one even with them. For the bottom of the legs and the waist make it an inch and a half.
Step 3: Cutting the Fabric
Pin your cutout patterns to the cloth. Fold the cloth so it is two layers thick to make them exactly the same size and shape. Cut as straight as possible to make it easier to sew later on. Then mark the cut pieces front or back.
Step 4: Sewing the Inseam
Put the two front pieces together so they are lined up and sew the inseam. Marking the sewing line with chalk helps a lot. Tie the thread ends so it doesn't unravel. Do the same to the back pieces.
Step 5: Sewing the Sides
Place the two pieces you have now so that if they were attached it would be inside out. Mark your line with chalk again. Sew the seam on the inside of your legs first. When you cross the area where all four pieces meet trim of any excess material and get it as flat as possible so there isn't a big lump there. Then sew the outside seam.
Step 6: Making the Waistband
With your piece of elastic find a length that is comfortable when stretched all the way around your waist. Fold the waist down enough to let the elastic fit in there and sew it down (the pants should be inside out again). Then stick the elastic in and guide it though the tube by pushing the fabric over it and then pulling it through.
Step 7: Hemming the Pants
This part is pretty easy. Put the pants on and then roll them up until they are at a good length. Measure how much and then roll them up while it is turned inside out. After that you just sew about a quarter inch away from the bottom.
Step 1
The secret here is to NOT cut out a particular size; instead, just trace off the size you need. I’ve used inexpensive taped-together white tracing paper from Hobby Lobby and traced the sizes I needed. That leaves me with all of my pattern sizes and styles still intact.
Step 2
The next step is to sew the inner leg seam (s). Translated, that means pin a Front and Back right sides together at the inner leg seam, then stitch. Repeat with the other Front and Back.
Step 3
The next step in the instructions is the one that I think causes people to curse like a sailor and abandon sewing. Here’s what the instructions say:
Step 4
This step is pretty straight forward. With right sides together match up the two side seams and pin. It should now look like a pair of pants.
Step 5
You will need to form a casing for the elastic at the waist. To do this fold the upper edge 1 1/2″ towards the inside. Press under the raw edge 1/4″
Step 7
AFTER you’ve completed your (optional) buttonholes then you will want to stitch down your elastic casing. Be sure to leave an opening to insert the elastic and twill tape.
Step 8
The instructions say to cut a piece of elastic the length of the Elastic Guide. Exactly, how does the Elastic Guide know the correct waist measurement? There is a better way to get this measurement. Measure 1″ below the waist of the wearer of the pajama pants and cut a piece of elastic 1″ larger than that measurement.
