Cut a strip of the tape that measures the length you want the finished garland to be. Starting at one end, pop the tied openings of the balloons through the small holes in the tape, alternating colors and sizes of balloons. When the garland is full, it's time to hang it and add the embellishments!
Full Answer
How do you make a balloon Garland?
There are a few ways to make a balloon garland. The first is you can tie each balloon onto a LONG piece of twine. The second way is to “sew” your balloons together by using a needle and thread or fishing line and pushing the needle through the bottom of each balloon. Or lastly, the easiest way, is you can do it by using a balloon decorating strip!
What kind of tape do you use for balloon Garland?
I used to use balloon tape (which is basically clear non-sticky "tape" with holes in it to put the balloons through) to make my balloon garlands, but I've found thick fishing line works MUCH better. I will also share how I make a balloon garland using balloon tape below in case you want to try that option.
How do you stick balloon tape to the wall?
When you get your balloon tape, you'll notice there are bigger holes and smaller holes. I used the bigger holes for this garland. I placed our larger balloons on every other large hole. This gives me room to actually stick the balloon tape to the wall without popping any balloons. Once I have my base done, I then tack the balloon tape to the wall.
How do you decorate balloons with decorating strips?
Attach balloons to decorating strip Using the balloon decorating strip, push the end of each balloon through the hole to attach, leave ~a foot at the beginning of the strip and end of the strip (to attach it to the wall easier). Just a note, you can always easily remove balloons if you find it to be difficult to attach it to the wall.
How long does it take to make a balloon garland?
What is a balloon garland?
What do you need to drape a garland?
What are balloon dot tabs?
How long does balloon garland last?
How long is balloon dot tape?
What is the best pump for a balloon?
See 2 more
How do you use balloon garland strip tape?
2:0414:34Using a Balloon Strip for the first time | Tutorial | How To | DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe got the first one basically just stuck it through the hole. And then slide it over through theMoreWe got the first one basically just stuck it through the hole. And then slide it over through the big hole and slide it over to the smaller side of the hole.
How do you make balloon garland with balloon tape?
10:4117:36EVERYTHING You Need to Know About Making a Balloon Garland ...YouTubeStart of suggested clipEnd of suggested clipTogether a single balloon strip now since these are so close together you might have to skip moreMoreTogether a single balloon strip now since these are so close together you might have to skip more holes than you would in a double hole balloon strip.
How do you make a balloon garland without a strip?
1:158:12No Strip? How to Make a Balloon Garland Without a Strip - YouTubeYouTubeStart of suggested clipEnd of suggested clipDo is twist the balloons together at the neck wrap one neck around the other. And pull it tight andMoreDo is twist the balloons together at the neck wrap one neck around the other. And pull it tight and tie it. And that's your first pair.
How do you make a basic balloon garland?
1:195:51DIY Balloon Garland | 1 Hour Easy Balloon Garland - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd that's gonna give me a really nice mix as I start to build this balloon Garland. So I'm justMoreAnd that's gonna give me a really nice mix as I start to build this balloon Garland. So I'm just gonna fill up a bunch of these to start with and then we'll start making the quads. I'm gonna take my
Can you make a balloon garland the night before?
Air-inflated garlands will last days – if not weeks – so it is perfectly fine to inflate your balloons and build your garland the day or night before your celebration.
How far in advance can you make a balloon garland?
For best results you can make a balloon garland up to three days before your party. Balloons are best when they are new and glossy looking, so for this reason you want to use them within 2-3 days of the party.
What kind of string do you use for balloon garland?
What is the Best Type of String to Use? If you are going to make a balloon garland using string, we suggest to use 0.5 mm Nylon line (also known as fishing line or monofilament) for this type of balloon arch and/or garland.
How do you make balloon strings?
0:392:56Organic Balloon Garland DIY Basics- Just Balloons & a String - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the sizes. And you'll need some fishing line clear fishing line. And you're going to take oneMoreAnd the sizes. And you'll need some fishing line clear fishing line. And you're going to take one balloon pair and tie the string. Nice and tight then place a second balloon pair on top at 90 degrees.
How do I attach a balloon garland to a wall without command hooks?
To attach your balloon garland to the hooks, use fishing line, ribbon or twine. My personal preference is fishing line as it's practically invisible. If you created the garland with the help of a balloon decorating strip, you can simply hang the end of the decorating strip to the hook.
How many balloons do I need for a 6ft garland?
Garland ChartNumber of Balloons Per Foot of Garland6″10.112.67″8.610.88″7.69.59″6.78.411 more rows
How many balloons do you need for a garland?
For a 10 foot balloon garland (like the pink balloon garland above and below), you'll need around 64 balloons of varying sizes. You can find balloons at Party City, Amazon, The Dollar Tree, Michaels, etc. Or, you can purchase a balloon garland kit. I like this one and there are a ton of color options.
How do you make a simple balloon arch?
0:116:25EASIEST balloon arch tutorial without stand | PARTY DASH - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow the wall hooks. These are necessary to help you hang your balloon garden arch you would have oneMoreNow the wall hooks. These are necessary to help you hang your balloon garden arch you would have one pile for your big balloons. And another pile for your smaller balloons blow.
How do you stick a balloon to the wall with tape?
2:197:09How to stick Balloons on the Wall | Valentines day decoration at HomeYouTubeStart of suggested clipEnd of suggested clipThe tape onto my balloon. So now it has two sides. It can stick on both sides so i'm going to stickMoreThe tape onto my balloon. So now it has two sides. It can stick on both sides so i'm going to stick it to the balloon. And then stick it onto.
How do you link balloons together?
0:536:06How to Use Quick Links Balloons | How to Make Linking ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere i'm going to take the butt of the one that i just inflated tie it to the tip of the one that'sMoreThere i'm going to take the butt of the one that i just inflated tie it to the tip of the one that's already insulated. And kind of tie it together like i normally.
How do you attach balloons to a balloon arch?
Fill in any gaps in the balloon arch with the 5" balloons and use the double sided glue dots to secure them in place. For the easiest application, unroll the glue tape to reveal one glue dot. Press the exposed glue dot lightly to your chosen location on the balloon and pull the tape gently away.
How many balloons do you need to make a garland?
For a 10 foot balloon garland (like the pink balloon garland above and below), you'll need around 64 balloons of varying sizes. You can find balloons at Party City, Amazon, The Dollar Tree, Michaels, etc. Or, you can purchase a balloon garland kit. I like this one and there are a ton of color options.
How to attach balloon garland to wall?
This will make it easier to attach your garland to the wall. Step 1: Cut the strip to the desired length of your balloon arch or garland. If you are doing a garland, simply measure the space where you want to hang it . Allow for some curves rather than measuring just a straight line.
What is a balloon decorating strip?
A balloon decorating strip, also called balloon arch tape or balloon garland strip, is a clear plastic strip, about 0.4" to 0.6" wide (1 cm to 1.5 cm), with evenly spaced out holes.
How to keep a balloon in place?
If you are using the double-hole strip type, pull the neck through the larger hole, then slide it into the smaller hole to lock it firmly in place. Take the next balloon, and pull it through the next hole.
What is the third type of balloon knot?
The third type has key shaped holes , i.e. a larger and smaller hole side by side, connected with each other. You pull the balloon knot through the larger hole, then slide it over to the smaller hole to lock it in place.
How many balloons per foot in Kinggrid?
Each 16.5 ft long strip has 110 holes and can hold as many balloons, i.e. 7 balloons per foot.
How to attach a fishing line to a wall?
Loop a piece of fishing line through one of the holes in the decorating strip, tie it off and attach the other end to the hook. Alternatively, tape the empty length of the decorating strip directly to the wall, using masking or painter's tape.
How big are balloons for arch?
To achieve the trendy organic balloon arch look, use balloons in different sizes, ranging from 5" to 36" balloons.
What is a balloon garland?
A balloon garland is a super easy way to make a big impact for any kind of party! They’re actually incredibly simple to make which you’ll see with this tutorial. If you’ve been around my world for any minute of time you know I LOVE balloon arches. And honestly, they make such an impact that they truly cut back on the rest ...
How to decorate a balloon with a decorating strip?
Using the balloon decorating strip, push the end of each balloon through the hole to attach, leave ~6 inches at the beginning of the strip and end of the strip (to attach it to the wall easier).
How to make a big impact with balloons?
This is a super easy way to make a big impact. 2. Attach balloons to decorating strip. Using the balloon decorat ing strip, push the end of each balloon through the hole to attach, leave ~a foot at the beginning of the strip and end of the strip (to attach it to the wall easier). Just a note, you can always easily remove balloons if you find it ...
What is glue dot?
Glue dots are how you will attach balloons into holes at the end of the project. One pack goes a long way.
How many balloons should I leave out for a balloon garland?
Be sure to leave out about 5-10 of the smaller balloons for filling in gaps. With this blue and white one I left out even more (closer to 15).
How many balloons do I need for a garland?
I use a mix of large balloons and small balloons for mine. For the bulk of my balloon arches that go over half our doorway, I use about 100 balloons.
How long does it take to make a balloon?
Typically the ones I make with around 150 balloons takes me about an hour to an hour and a half to make.
How do I hang balloon garland?
To hang your balloon garland, you’ll want to tie each end to something. I often use my stair railing, but if you don’t have that nearby then you’ll want to use command hooks. These ones and these ones are my favorite because the fishing line stays put.
How long does it take to make a balloon garland?
How long will this take me? – If this is your first time making a balloon garland, plan on at least an hour. Again, I have made a ton of these so I can make them in about 30 minutes. Your first garland will probably be very frustrating, but keep going and you’ll get better!
How many balloons should I use for a balloon garland?
First, decide on how big you want your balloon garland. For a 10 foot balloon garland (like the pink balloon garland above and below), you’ll need around 64 balloons of varying sizes. You can find balloons at Party City, Amazon, The Dollar Tree, Michaels, etc. Or, you can purchase a balloon garland kit. I like this one and there are a ton of color options. It is a more expensive option, but the balloons are great quality and they’re biodegradable.
What do you need to make a balloon garland?
Supplies You’ll Need to Make Your Balloon Garland. In order to make your balloon garland, you’ll need just a few supplies. Balloons (the below garland uses 64 balloons), strong fishing line, an electric balloon pump, and command hooks.
What is balloon tape?
I discovered balloon tape while searching on Amazon. It is basically just a roll of clear “tape” (it isn’t sticky) with holes punched through. The holes are where you will put your balloons through. This helps to make the base for your balloon garland.
How long do you hold balloons against balloons?
I hold them against the large balloons for around 20 seconds till the glue sets. Keep doing that until you’re happy with the way it looks! You can also add in greenery if it goes with your party theme.
Can you glue balloons to bigger balloons?
With the low temp glue gun, you can glue your smaller balloons onto the bigger ones. You need to look for the low temp specifically, since the high temp will pop the balloons!
How long does it take to make a balloon garland?
However, modernization has simplified the process so much that a balloon garland can be created in as little as 19 mins from start to finish and cost under twenty-five dollars.
What is a balloon garland?
A balloon garland is an arrangement or cluster of varying sizes of balloons draped into an organic shape and mounted against a backdrop or surface. A balloon garland is sometimes called an organic balloon arch.
What do you need to drape a garland?
After you have chosen your location, it will be time to drape your garland. You may need a fishing line or string, command hooks, balloon duct tape, or mounting tape to attach your garland to the surface of choice. You can also use a combination of tools for additional reinforcement.
What are balloon dot tabs?
Balloon dot glue tabs are circular tabs of 2 sided tape or glue that are usually on a reel or laid out on a flat sheet of paper. The dot glue tabs can be used to fill in spaces throughout your balloon garland decoration with smaller balloons or balloons of various shapes, colors, and sizes. Be creative and blend the small and large balloons on the decorating strip tape to create the effect that you desire. During cold weather, you can use a hairdryer to improve the glue stickiness before placing them on the ballon.
How long does balloon garland last?
Take a step back and look at your work. Air-filled balloon garland will last as much as 1 week indoors. Congratulations, you did it!
How long is balloon dot tape?
(link to this article for definition) The length of the tape in each kit is about 25 feet (verify). You may or may not need this entire length. You can cut the tape to get your desired length. Do not cut the exact length.
What is the best pump for a balloon?
For small or one-off projects, a manual double-action hand operated balloon pump is adequate. A manual balloon inflator may be required if you have to set up your balloon arrangement outdoors or away from an electrical outlet.
