Determine the Size
- Locate a ladder or step stool, depending on the height of your ceiling fan. You’ll need to be able to easily reach the fan blades.
- Wipe down the surface. ...
- Find where your fan blades are attached to the ceiling fan housing and motor. ...
- Use a screwdriver to remove a single fan blade. ...
- Measure the length of the ceiling fan blade you just removed. ...
How to size up a ceiling fan?
- For rooms 75 square feet or smaller, your ceiling fan should be 36 inches (91.4 cm) or less in diameter.
- For rooms between 75 and 144 square feet, your ceiling fan should have a diameter of 36 to 42 inches.
- For larger rooms, with a square footage around 225, a 50 to 54 inch (130 to 140 cm) blade span, or even larger, are best.
How to make your own ceiling fan blades?
To create your template:
- Trace the blade on a large piece of paper, if using the original blade.
- Make sure that you are happy with the same design; this is the time for any modifications if you want them
- Cut the paper template out. Be sure to get the cut exact. ...
- Trace the mocked-up blade on the piece of wood you want to use. ...
- Cut the wood following your trace lines.
Can you shorten the blades on a ceiling fan?
You cannot shorten ceiling fan blades. You can purchase replacement blades at any home improvement store and just replace them. Subsequently, question is, are ceiling fan blades universal? If your ceiling fan needs a replacement blade or blade holder, you may find yourself having to buy a multi-pack. Blades and blade holders usually come in sets.
How do you find a beam in the ceiling?
The second way is much easier
- Buy the best stud finder and take it home
- Turn it on and run it along your ceiling in the direction your joists go
- If you are not sure of their direction, go to your attic and look at the joists
- As you run the stud finder along your ceiling, it should light up a series of indicator lights to let you know where the stud is.
How are ceiling fan blades measured?
Standing on a step ladder as needed, hold one end of a tape measure to the tip of a fan blade on a fully assembled fan. If the unit has an even number of ceiling fan blades, extend the tape measure to the end of the opposite blade and record the distance from tip to tip. This is the diameter.
How long are the blades on a 42 inch ceiling fan?
Helpful Expert Reply: I measured the Replacement Blades for AirrForce 42" Hugger Style RV Ceiling Fan # 277-000398 for you and they are 16- 5/8 inches long with 4 inches wide at the bottom and 4-7/8 inches wide at the top.
How long are the blades on a 52 ceiling fan?
There's no specific, precise number as to how long the blades on a 52-inch ceiling fan are. It varies, depending on how big the center of the fan is. In many cases, a 22-inch blade will fit. However, anything from 20 inches to 25 inches likely depends on your specific model.
What size ceiling fan blades do I need?
Ceiling Fan Size GuideRoom Size (In Sq. Feet)Room TypeRecommended Blade Span144-225Medium Bedrooms, Kitchens, Dining Rooms, Dens, Patios44-50" Fans225-400Master Bedrooms, Family Rooms, TV Rooms, Small Garages, GazebosFans Over 50”Over 400Great Rooms, Large Garages, Basements, and Open Floor PlansFans Over 62”1 more row•Apr 16, 2020
What does a 44 inch ceiling fan mean?
A 44-inch ceiling fan, for example, will move 3,600 to 3,700 cubic feet of air per minute. To install a fan of this size in a small room means that you are buying far more air-moving capacity than is needed.
Does ceiling fan blade size matter?
Blade Span The most common ceiling fan blade spans are 52 and 42 inches. Longer blades work best for larger rooms and create softer, more comfortable airflow. Shorter blades offer more direct airflow and are ideal for smaller rooms. The volume of air is not determined by blade span, but by the motor.
Can you replace just the blades on a ceiling fan?
No, ceiling fan blades are not interchangeable. It will typically depend on the fan model. Blades can only fit their designated model. Otherwise, if you purchase fan blades for your ceiling fan, you'll most likely run into problems.
Is a 52 inch fan too big for a 12x12 room?
Yes, a 52" can fit in a bedroom -as long as you consider the guidelines for room size. The bedroom should be at least 12 'x 14' or larger, with a floor clearance of at least 7' for this size fan.
Can you replace ceiling fan blades with shorter ones?
Ceiling fan blades can be shortened by cutting them with a jigsaw. All the blades must be cut in exactly the same shape and size. After cutting it is recommended to balance the blades with a balance kit.
Do more blades make a ceiling fan better?
When a fan has fewer blades, there is generally less dragon on the motor. This means it can go faster and more air more efficiently. As a result, there is more airflow and a better wind chill effect.
How do I know which ceiling fan to buy?
ENERGY STAR® makes the following recommendations for ceiling fan diameter:Rooms up to 75 square feet = 29 to 36 inches.Rooms 76 to 144 square feet = 36 to 42 inches.Rooms 144 to 225 square feet = 44 inches.Rooms 225 to 400 square feet = 50 to 54 inches.
What happens if your ceiling fan is too big?
A ceiling fan that's too big will overpower the room's design and visually pull the ceiling downwards; a fan that's too small won't properly circulate the air.
How long should ceiling fan blades be?
Length of longest wall is less than 12 feet, your fan width or blade span should be 46 inches or less. Length of longest wall is 12 to 18 feet, your fan width or blade span should be 48 to 56 inches. Length of longest wall is more than 18 feet, your fan width or blade span should be 56 inches or more.
What's the difference between 3 and 5 blade ceiling fans?
When it comes to design and aesthetic look, the 3 bladed ceiling fan is more pleasing than the 5 bladed. However, the 5 blades can generate more wind because the blade to blades distance is nearer, thus the wind it produces is more consistent.
What is sweep size in ceiling fan?
Very simply, sweep size is the entire diameter of the blades. What's important is knowing the length of the fan blade from one tip to another. You need to match the blade length with the size of the room you plan to install your fan in.
What is the difference between a 4 blade and 5 blade ceiling fan?
The main difference between 4 and 5 blade ceiling fans is generally one of aesthetics and personal taste. And, as we discussed above, the more blades a fan has, the quieter it will be. However, more blades can increase drag on the motor.
How to measure fan blades?
If the ceiling fan has an odd number of blades (3,5), measure the distance from the center of the fan to the tip of any of the blades. Multiply this number by 2 and you have your blade span or fan size.
How to find the span of a ceiling fan?
If the ceiling fan has an even number of blades (2,4), measure the distance from the tip of one blade to the tip of the blade on the opposite side to find the blade span.
How Many Ceiling Fans Per Room?
As mentioned above, if you have a large room that is more than 400 square ft you should consider multiple fan installations to help evenly distribute the airflow throughout the room.
What does a higher CFM rating mean?
But the caveat is that a higher CFM rating usually means that the fan guzzles power. Ideally, you should look for a CFM rating that corresponds with low power usage to ensure that you have an energy efficient ceiling fan that can help reduce power bills in summer and keep the thermostat low during winters.
How high should a ceiling hugger be?
A ceiling hugger or a flush design that sticks close to the ceiling without a downrod is preferred for ceilings that are lower than 10 feet in height. For ceilings above 10 feet, you’d typically need a downrod. The length of the downrod can vary depending on the room size.
What is the size of a ceiling fan?
When you go ceiling fan shopping, you will notice that the size of the fan is measured in inches. 36, 48 and so on! This is called the sweep or the blade span of the fan.
What to consider when buying a ceiling fan?
As you can see, there’s a lot more to consider when purchasing a ceiling fan then simply whether it looks good, has LED light bulbs or wireless capabilities (obviously those are important too!). It really pays to do your research and calculate what size fan you are going to need for your room.
How to determine the size of a ceiling fan?
The size of a ceiling fan is determined by the size of the room or the area which you are looking to cool. To determine the square footage of the room or the area, multiply the length of the room in feet by the width of the room in feet. The total you receive from this calculation is the size of your room in square feet. For example, if your room is 8’ by 8’, the square footage is 64 square feet.
How to measure fan blade span?
If your fan has an odd number of blades, you will measure the distance from the center of the fan to the blade tip and then multiply the number by two.
How High Is Your Ceiling?
There should be a 7-foot minimum distance between your ceiling fan’s blades and the floor.
Why isn't my ceiling fan moving?
If you are noticing that your existing ceiling fan isn’t moving the air in your room to your expectations there is a chance it is due your ceiling fan blades and their size. A ceiling fan’s blade span is an important indicator of its CFM and the room size that it should be placed in.
How to find the right size ceiling fan for my room?
To find the right size ceiling fan for your living room it is essential that you focus on the square footage of your room and follow the table above . By finding the appropriate blade span and CFM for your living room you will ensure that your room is cooled effectively.
How far should a ceiling fan be from the ceiling?
If you have a ceiling between 8 and 9 feet, you will need low-profile (aka hugger or flush mount) ceiling fan, which measure at least 12 inches from the ceiling to the lowest point of the fixture and are built to be hung on ceilings as low as 8 feet.
How long is a downrod for a ceiling fan?
Downrods, or ceiling fan mounting rods, allow a ceiling fan to be mounted on either a vaulted or flat ceiling and are available up to 72 inches long. Please visit our “What Size Downrod Do I Need? Guide” to determine what length downrod you need based on your ceiling height.
