Measuring Your Closet - How to Measure Your Closet
- STEP 1: MEASURE CLOSET WIDTH Figure 1, red arrows ...
- STEP 2: MEASURE CLOSET DEPTH Figure 1, blue arrows ...
- STEP 3: MEASURE CLOSET HEIGHT Isa custom closets have a standard height of 84". ...
- STEP 4: CHECK FOR BASE MOLDING Figure 1, brown arrows ...
- STEP 5: CHECK FOR DRAWER CLEARANCE Figure 2 drawers: red X represents problem area ...
- STEP 6: ADD THREE INCHES
How do you measure for a walk-in closet?
This most often occurs in a walk-in closet where the system comes out of a corner. This measurement should never include fractions of an inch. Measure the width of the wall: Measure the wall where you want to put the closet system three times using three different height locations (high, middle, low). Record the smallest measurement as your width.
How do I choose the right closet design?
Browse 19 ultra-luxurious and over-the-top closet designs and steal ideas for your own wardrobe. Measurements for your closet's width, depth, return walls and size of the door opening will determine the kind of shelving and the extras you can add to the basic configuration of your closet.
What is the standard height of a custom closet?
Isa custom closets have a standard height of 84". Measure the height of your space from ceiling to floor to ensure that it will clear 84" tall closet panels (or taller if you are customizing the height) Our custom closet systems extend all the way to the floor.
How high should a closet shelf be from the floor?
Measure from floor to ceiling: Make sure the system will fit in the space height-wise. Keep in mind that the top shelf is usually installed at a height of 84 inches from the floor for a standard closet system. Heights can be planned to go higher if you have ceilings greater than 8 feet.
How do you measure a room for a closet?
If the room you're measuring has a closet, bay window or some other recess or protrusion, measure the shortest length and width of the room first. Multiply these measurements to get the main area of the room. Then calculate the area of the individual recesses by measuring their length and width.
How do you measure to build a closet?
WidthFollow the vertical approach for height and adjust to horizontal to measure width.Secure the 1” mark against the left wall of the closet then pull the tape until you reach the right wall. ... Measure at 3 heights on the wall (low, middle, high)Record the smallest measurement on the worksheet.
What are standard closet measurements?
A typical reach-in closet is approximately 6-feet long, 8-feet high, 24-inches deep with an 80-inch high door opening. Reach-in closets are very practical for a single occupant. They allow for easy viewing and access to all contents.
How deep is a standard closet?
24-inchesThe standard closet depth is 24-inches or two feet. You can't go any less than this because the hanger itself is around 20-inches for an adult hanger. This means that you will have a few inches to spare for wider clothing.
What is the minimum size for a closet?
The Basics Walk-in closets require two essential components: space to walk in and room for hanging clothes. The former requires at least 30 inches. Typically, a person of average size will want this much room just to stand or walk comfortably without bumping into anything.
Is 3 feet too deep for a closet?
Walk-in closets should be at least 4 feet wide by 4 feet deep, and the closet's storage accommodations should be designed so that there is at least a 24-inch clear passageway between shelves or hanging clothes inside the closet.
What is the standard size of a walk-in closet?
A standard full-size walk-in closet design should be about 7 by 10 feet, but it's better if the area is at least 100-feet. This gives plenty of room for two people to store their clothing. So 10×10 is a great, generous size for walk-in closet dimensions.
What is a good size for a master bedroom closet?
How Much Space Do You Need for a Master Closet? A walk-in master closet should be a minimum of seven feet by 10 feet, and preferably 100 square feet for two users. That gives you space to line two or three walls with shelves, cubbies, and poles, and the elbow room to reach them easily.
How do you measure linear feet in a closet?
To measure linear footage, start by measuring the length in inches. Then divide the total inches by 12. The length is the linear footage, so no fancy linear foot calculator is required.
What are the measurements for a small walk-in closet?
What is the smallest size a walk-in closet can be? A walk-in closet needs to be at least 4ft wide by 4ft deep – large enough to install at least three hanging rails in a U-shape.
Is 18 deep enough for a closet?
Drawers for folded clothes should be set at a minimum of 18” (45.7 cm) with deeper drawers for multiple rows of folding clothing at a depth of 24” (61 cm). Deep drawers are consistent with standard closet depths 24” (61 cm).
How to measure closet space?
Steps when measuring your closet space for a new custom closet system: Measure the width of the wall: Measure the wall where you want to put the closet system three times using three different height locations (high, middle, low). Record the smallest measurement as your width.
What is a walk in closet measurement?
This measurement is for a system that either floats on the wall or is only installed against one sidewall. This most often occurs in a walk-in closet where the system comes out of a corner. This measurement should never include fractions of an inch.
What are the two key concepts that you must understand in order to ensure to accurate and successful closet measurement?
Two key concepts that you must understand in order to ensure to accurate and successful closet measurement are hard measurements and soft measurements .
What paper to use to scale a closet?
Sketch pad: Make sure to properly transcribe all numbers to your sketchpad, and then draw out your closet. Graph paper works best for drawing out the project to scale using these closet measurements.
How high should a closet top shelf be?
Measure from floor to ceiling: Make sure the system will fit in the space height-wise. Keep in mind that the top shelf is usually installed at a height of 84 inches from the floor for a standard closet system.
Do baseboards matter for suspended closets?
Baseboards do not matter for suspended closet systems that hang from the wall. However, if you do not plan to remove the baseboards on your floor based closet system prior to closet installation, note the baseboard measurements and whether or not quarter round is included.
Do you check a closet twice?
It is always best to check it twice and in multiple locations, as walls are rarely ever straight. One false measurement and all your plans for a more organized life could be down the drain when your new closet system doesn't fit your space and must be redone.
Online Design Consultation Preparation
Like many of us on Stay-at-Home and Shelter-in-Place orders, we are spending all our time at home. In our case, Sara is working at home, finding alternative ways to help clients continue to move forward with what you need to nest and enjoy what time at home you have.
Schedule a free design consultation with a designer
Each of our custom closets is completely personalized and begins with a complimentary design appointment.
How many width measurements are there for a closet?
You are going to take nine width measurements: At the top, middle, and bottom of the closet, and at the front, middle, and back of the closet. Use a chart like the one shown at the bottom of this page to keep track of the measurements.
How deep is a reach in closet?
A reach-in closet is usually just 24" or 25" deep, but within this space, there may be considerable variation. Walls are usually not perfectly plumb, floors and ceilings are seldom perfectly level. Nor is any corner likely to be a perfect right angle. In a large space, minor variations make little difference. But in a small area like a reach-in closet, they can greatly affect closet design.
How to measure a floor for carpet?
Measure the height of the space from the floor to the ceiling. If the space is to be carpeted, measure the subfloor (the floor under the carpet). If the floor is a wood or tiled floor, measure from the finished floor.
How to tell if closet door is bi fold?
If the closet doors are to stay, indicate which way the door opens. For doorways with hinged doors, draw the door according to which way the door swings. For bi-fold doors, show which way the door folds — in or out, right or left or both sides. If the door is a bypass (or sliding door), show which of the doors is in front.
What is a walk in closet?
Closets come in two basic configurations: reach-in closets and walk-in closets. A walk-in closet is a small room, usually with just one door and no windows. It is measured just like any other room. (To learn how to measure a room, see How to Measure Your Kitchen and Other Rooms ).
Where to measure wall size?
As always, measure at the bottom, middle, and top of the wall, and write down each measurement in a chart like the table below.
Do you include poles in measurements?
Do not include any current poles, rods, shelves, cabinets or organizers in your measurements.
Why is it important to measure closets?
Precise measurements will save you a big headache from unfit closet systems. It's extremely important to see how much space you have to work with. Precise measurements are especially important for wood systems that require cutting, being 1/2 inch off can mean the difference between your system fitting or not fitting the space.
How deep should a closet be?
A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women's shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.
How tall should a double hanging rod be?
84 inches is considered the minimum height to hold double hanging rods. Blouses and shirts will take up about 1 inch of rod space, pants and skirts around 1 1/4 inches and dresses, jackets and suits about 2 to 3 inches. Remember the numbers above are a general guideline.
What does 1/2 inch off mean?
Precise measurements are especially important for wood systems that require cutting, being 1/2 inch off can mean the difference between your system fitting or not fitting the space.
Can you hang a closet on drywall?
Many inexpensive closet storage systems hang from wall-mounted tracks and are made to work with the most common wall construction, drywall over wooden studs. If you have another type of wall (an urban loft with brick or concrete walls) you may need special screws to secure your closet system in place. Always check the manufacturer's instructions about the kind of surface to mount on, and contact the company if you have any questions or uncertainty about the weight your walls can bear.
Do you measure a closet wall square?
Since most closet walls are not perfectly square, you may want to take measurements in a few places and go with the smallest dimension. It helps to have someone with you while you're taking the measurements, to hold the measuring tape and write down numbers as you go along.
How to tell which way a door swings?
The easiest way to determine which direction you need your door to swing is to stand with your back against the wall where the door hinges will be. If you want the door to open to your left, you need a left hand door. Likewise, if you want the door to open to the right, you need to purchase a right hand door.
What to do if your door is not square?
If you do find that your door is not exactly square, you have a few options. The first option would be to re-frame the doorway. This requires removing the trim and jamb by cutting away what you currently have and making the corners and edges square.
Why are my doorways varying in size?
Depending on the year your home was built or the quality of the framer, there may be some varying sizes due to settlement or just poor craftsmanship. Next you will want to measure the height of your doorway from the floor to the inside edge.
