- Start by removing the lamp shade from the lamp to make it easier to measure.
- Place a measuring tape across the top of the lamp shade, from edge to edge and as close to center as possible, to find the top diameter. ...
- If you have a square lamp shade, measure along its width from corner to corner to get the top measurement.
- Flip the lamp shade upside down and measure from one edge to the opposite edge across the bottom diameter, just as you did when measuring the top. ...
- Flip the lamp shade right-side up. Find the length of the slant by measuring from the top edge of the lamp shade to its bottom edge. ...
- If you are measuring a square lamp shade with no slant, measure its height from top edge to bottom edge. Use this measurement as your “slant.”
- You can also measure the height of the lamp shade by starting at the bottom edge and measuring straight up. ...
How to determine the correct lampshade size?
How to Determine the Correct Lampshade Size 1 Measure across the TOP of the lamp shade 2 Measure across the BOTTOM of the lamp shade 3 Measure along the SLANT (side) of the lamp shade
How do you measure the slant of a lamp shade?
Flip the lamp shade right-side up. Find the length of the slant by measuring from the top edge of the lamp shade to its bottom edge. The measuring tape should lay flat against the shade’s slope. Write down this measurement.
How do you measure for hurricane glass shades?
8. Hurricane glass shades are commonly used on chandeliers and wall sconces. Measure the holder or cup will measure inside edge to inside edge. The glass itself is called a 1 5/8" fitter. Look under the 1 5/8" FITTER, CHANDELIER GLASS or HURRICANE categories for this style.
How do you measure for a ceiling shade?
The most significant aspect for a ceiling shade is the drop length of the light - how much clearance will you need to allow underneath? Measure from the light fitting (where the bulb will be) and then add this to the drop height for your new lamp shade from the fitter.
How do you measure a hurricane globe lamp?
Typically the oil lamp chimney extends up thru the middle of the lamp shade and rises 2″-4″ above the top of the shade. Bottom diameter is measured outside edge to outside edge. This measurement is important as it must fit the holder or burner.
How do I measure for a replacement lamp shade?
Place a measuring tape across the top of the lamp shade, from edge to edge and as close to center as possible, to find the top diameter. Write down this measurement. If you have a square lamp shade, measure along its width from corner to corner to get the top measurement.
How do I know my lamp shade size?
To choose the right lamp shade width, measure your lamp base and multiply by two. For a round base, measure straight across; measure diagonally for a square base. The widest part of your shade should be at least a half-inch wider than the widest part of your base on each side.
What does fitter size mean?
The shade holder fitter size refers to the diameter of the opening of the holder through which the glass shade “fitter” passes. The size of fixture-type shade holders and shades are, for the most part, standardized in North America and are found in several common sizes.
What are the 3 types of lampshades?
The three most common types of lampshade assemblies are: Spider, Uno and Clip-on (see diagram). The Spider or Standard assembly is the most conventional, consisting of multiple spokes positioned at the top of the shade that meet at a central point which attaches to the harp.
Do lamp shades fit all lamps?
The fitter is the wire part of a shade that connects it to the lamp body. Fitters are not interchangeable, so be sure to use a shade with the correct fitter for your lamp.
What is a spider fitting on a lampshade?
Spider Fittings: Spider fittings are the most common type of fitting for table and floor lamps and are used with harps. The harp attaches to the lamp base, and the spider fitting sits on top of the harp and is often secured with a finial that screws onto the top of the harp.
What size lamp harp do I need for a 10 inch shade?
Select a harp that's at least 2 inches shorter than the height of your lampshade. If you would like a more dramatic look for your lamp, allow your lampshade to cover a portion of your lamp's base by choosing a harp that's 4-8 inches shorter than the height of your lampshade.
What is an UNO lamp shade?
An uno lamp shade is a type of shade that fits onto a lamp socket with an uno fitter. The uno fitter has arms radiating outward attached to the inside edges of the shade that support a hollow round piece that slides over the socket.
What is a lamp fitter size?
The fitter is the outer diameter of the lip which is inserted into the fixture's shade holder. This will measure a little less than the fitter size so it can fit into the shade holder of the same measurement. The height of a glass shade is taken from the base of the fitter lip to the bottom of the shade.
How do you measure a shade holder?
The most common diameters for shade holders are 2 1/4", 3 1/4", 4", 6", 10" and 12". Next, measure the width across the widest part of the shade, which may be the top, middle or bottom – depending on the shade type and style. Last, measure the height from the base of the fitter lip to the bottom of the shade.
How do lamp shades attach?
They have openings at the tops and bottoms that allow additional light and heat to escape. The shades attach to the lamp by means of a fitter that attaches to the lamp shade's frame. Measuring a lamp shade will help you determine the right size shade for your lamp so that it will be in proportion to the lamp's base.
How do you measure fitter opening?
1:202:24How to measure a Shade Fitter - YouTubeYouTubeStart of suggested clipEnd of suggested clipHolder. These shades are all seven-inch. Shades this is a fixture shade or a two and a quarter inchMoreHolder. These shades are all seven-inch. Shades this is a fixture shade or a two and a quarter inch shade. The top measures about two and a quarter inches across the top and it has a lipped fitter
What is a spider fitting on a lampshade?
Spider Fittings: Spider fittings are the most common type of fitting for table and floor lamps and are used with harps. The harp attaches to the lamp base, and the spider fitting sits on top of the harp and is often secured with a finial that screws onto the top of the harp.
How do you measure a table lamp?
0:101:29How to Select the Perfect Table Lamp - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst consider the height to determine the perfect height range sit in the space next to where youMoreFirst consider the height to determine the perfect height range sit in the space next to where you are going to place the lamp measure from the surface you are placing the lamp to eye level.
What size lamp harp do I need?
Select a harp that's at least 2 inches shorter than the height of your lampshade. If you would like a more dramatic look for your lamp, allow your lampshade to cover a portion of your lamp's base by choosing a harp that's 4-8 inches shorter than the height of your lampshade.
How to measure the height of a lamp shade?
1. Measure across the TOP of the lamp shade. 2. Measure across the BOTTOM of the lamp shade. 3. Measure along the SLANT (side) of the lamp shade. These are the 3 dimensions you will see listed with most lamp shades (Top x Bottom x Slant). A fourth dimension that can also be helpful is measuring the height straight from top to bottom.
What should the diameter of the bottom of a lamp shade be?
3. The diameter of the bottom of the shade should not be greater than the height of the lamp body (to the bottom of the socket).
Should the shade kiss the top of the lamp’s base? Should we see a little of the harp/hardware part of the lamp?
The bottom of the lampshade should come to the top of the body of the lamp so that no mechanical parts except 1/2 the neck show. The bottom of the shade should also fall at the eye level of the user. Most harps are interchangeable so you may need to purchase a new harp with your new shade. Harps come in regular and heavy (higher end lamps) and are usually imprinted in the top with their size in inches.
What determines the maximum wattage of a lamp?
5. Consider your wattage needs! The lampshade (not the lamp body) determines maximum wattage allowed.
How to make a lamp shade?
1. The more basic the shape of the body of the lamp, the more varied styles of shades it can take. 2. Repeat the shape (s) in the lamp body in the shade shape; i.e., a round lamp on a square base can take a shade with a rounded top and square bottom. 3.
Can a round lamp take a shade with a square base?
• Repeat the shape (s) in the lamp body in the shade shape; i.e., a round lamp on a square base can take a shade with a rounded top and square bottom.
Can a shapely lamp be used as a shade?
A shapely lamp can take a shapely shade. An interesting alternative is to repeat the shape of the vase stand (as opposed to the vase shape) in the shade. For example, try a square shade on a round ginger jar with a square wood base.
How to measure a lamp shade?
Place the measuring tape across the top diameter in the center. Hold your tape measure at one end of the top edge of the lamp shade, and pull it across to the opposite edge in the right in the middle. If your shade has a square shape, measure one side of the square from corner to corner for the proper measurement.
What are the measurements for a shade?
Most shades list the measurements in the following order: top diameter, bottom diameter, and slope/height.
How to make a lamp stand out?
Pick a shade that’s bottom diameter is wider than the widest part off the lamp body. You don’t want to slim down too much with the shade, so it helps if its bottom is wider than the lamp’s base, which is usually its widest part. It can help give the lamp a more dramatic look so it’s sure to stand out.
How to make a lamp shade look balanced?
2. Opt for a shade with a top diameter that matches the lamp base. Your lamp will have a more balanced look if the top of the shade is as wide as the bottom of the base. It also helps to choose a shade that’s the same shape as the base for a cohesive look.
How to remove a spider lamp shade?
If the lamp has a spider lamp fitter with a lamp harp, unscrew the finial that holds the shade onto the harp and then lift the shade off . If your lamp has an UNO lamp shade fitter, unscrew the bulb and carefully lift the shade off.
Does a lamp shade have a slope?
Sometimes, a shade’s slope is referred to as its height. If you have a square lamp shade, it obviously won’t have slope. Measure from top to bottom in the same manner, though, to get the height of the shade.
How tall should a lamp shade be?
The Right Height: In most cases, your lamp shade should be roughly 2/3 the height of the lamp body. The Perfect Profile: Similarly, many design experts suggest that shade’s width be roughly equivalent to the visible height of the lamp base.
What are the different types of lamp fitters?
There are three types of lamp fitters: Spider fitters. UNO fitters. Clip-on fitters. 1. Spider Fitters with Harp. This is the most common type of fitter for table and floor lamp shades. (Bonus: at Lamps Plus, we include it free with each purchase.) 2.
Do you need to measure for a new shade?
And since many lamps or fixtures look great with any number of shade shapes and styles, you don’t necessarily need to buy a new shade that’s exactly like the one you’re replacing!
Do you need a harp for a lamp shade?
Because the shade attaches directly to the socket by using a permanently installed wire, no harp is needed. (Note: This type of shade is usually built into the design of the lamp and is not always easily replaceable.) 3. Clip-On Shade Fitters. These fitters are usually paired with smaller accent lamps and chandeliers.
How to measure the diameter of a lamp shade?
To determine the total diameter for your new lamp shade, measure across the light at the widest part (this is usually the very bottom of the base) and then multiply this measurement by two. For example, if the diameter of the widest part of your lamp base if 10 inches, then your lamp shade diameter should be 20 inches wide. ...
How should a lamp shade look?
As a rule, a lamp shade should complement your light without taking away from the design of the lamp base, or the room. It's preferable to look for a shade that isn't a) too wide, b) too tall, or c) too short, as this will make the overall shape of your light look unbalanced. Traditionally, the height of a lamp shade should be around half ...
How high should a lamp shade be?
Traditionally, the height of a lamp shade should be around half of the height of the lamp base. So, start by measuring your lamp base height, and then divide this measurement by two. For example, if your total lamp base height is 25 inches, then your shade should be around 12.5 inches high.
How much clearance do you need for a ceiling shade?
It is best to leave a reasonable clearance from the bottom of the pendant to the floor (around 7 or 8 feet) so that people can comfortably pass underneath the spot where your ceiling shade is hung.
How big should a pendant shade be above a table?
A large dining table would be complemented by a similarly-sized large light pendant that is around a third or two-thirds of the entire width of the table. When shopping for a shade above a smaller table, think about proportions and ensure that the difference in size between shade and table isn’t too significant.
Can you go bigger on a lamp shade?
Of course, these are a guide, so if you want to divert from the traditional proportions for a lamp shade then you can go larger for additional impact and a more contemporary look. We wouldn’t advise buying a shade much smaller – this can bring the shade too close to the light fitting which makes it unsafe due to the heat emitted from the bulb.
What is hurricane glass shade?
Hurricane glass shades are commonly used on chandeliers and wall sconces. Measure the holder or cup will measure inside edge to inside edge. The glass itself is called a 1 5/8" fitter. Look under the 1 5/8" FITTER, CHANDELIER GLASS or HURRICANE categories for this style.
Where is the shade on a torchiere lamp?
The shade is placed on the lamp around the bulb socket, and a ring threads around the socket. Shades on older torchiere lamps have a longish neck that measures 2 3/4" which fits around an oversize Mogul light bulb socket. Look under the TORCHIERES FOR OLDER LAMPS category for this style.
How high should a chimney be above a shade?
Chimney height is a matter of personal taste. If you are using another shade that sits around the chimney, you want the chimney to extend 2″-4″ above the top of the shade. 3.
Lamp Shade Measurements
A lamp shade has four different measurements to note before buying. Lamp shade dimensions are typically measured as top x bottom x slant.
How to Measure a Lamp Shade
Start by removing the lamp shade from the lamp to make it easier to measure.
Tips for Choosing a Lamp Shade
The lamp shade’s top diameter should be at least as wide as the base of the lamp.
Lamp Shade Materials
Lamp shades come in many different materials but can be sorted into main categories: opaque and translucent.
Lamp Shade Fittings
The fitting on a lamp shade determines how the shade attaches to the lamp. When replacing a lamp shade, you will want to find a new shade with the same type of fitting. There are four main types: clip on fitting, spider fitting, Uno fitting and screw on fitting.
Maximum Light Bulb Wattage
It is a common misconception that the maximum wattage of a light bulb is determined by the lamp. In fact, the size of the lamp shade determines the maximum wattage of the light bulb. The lamp shade should always be a certain distance away from the light bulb for safety reasons.
