How to Measure for Drywall
- 1. Measure the Wall's Width and Height ...
- 2. Measure Doors and Windows ...
- 3. Determine the Ceiling's Square Footage ...
- 4. Add Your Measurements Together ...
- 5. Choose the Size of Your Drywall Panels ...
- 6. Determine How Many Panels You'll Need ...
- 7. Factor in Room for Mistakes ...
- 8. Finish Your Calculations ...
How do you calculate drywall?
Make sure to input the following drywall measurements:
- Room dimensions — You need to type in the length, width, and height of your room.
- Ceiling — Choose whether you want to include the ceiling in your calculations.
- Room surface area — This value will be calculated automatically. ...
- Doors — You can use the default dimensions or type in custom ones. ...
What is the standard size of drywall?
The standard size for drywall panels is 4 feet wide by 8 feet long, and usually you won't find panels that are longer. While standard drywall works well for bedrooms and living rooms, there are other types of drywall that work well for specific parts of the home.
How do you measure how much drywall needed?
- If your room is not a square or rectangle, break it up into smaller sections. ...
- Sloping walls all together form a triangular area. ...
- If measuring by hand, always add at least 10% to the drywall sheets required. ...
- If measuring by hand, you must know the size of your desired sheetrock. ...
How do you determine the best drywall screw length?
- Take into account the type of screw head when you are measuring, because different screw heads rest differently on surfaces.
- For instance, a flat-headed countersunk screw will rest flush with a surface. ...
- Round-headed countersunk screws only sink part-way into a surface, so the rounded top will stick above the surface. ...
How do I calculate drywall for a room?
Estimate Drywall Sheets Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you're using 4-by-8 sheets) or by 48 (if you're using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet.
How much drywall do I need for a 12x12 room?
A 12′ by 12′ room with 8′ walls would have a total of 576 sq ft. After dividing the square footage by 32, we know that a 12×12 room would need 18 sheets of drywall.
How do you calculate labor for drywall?
Based on the potential total square footage of drywall used, a drywall contractor should charge $1.50 to $3 a square foot to hang and finish drywall. Which individual pricing between $1.50 and $3 a contractor chooses depends on the level of job difficulty and professional experience.
How many sheets of drywall do I need for 1000 square feet?
After you find the square footage of drywall needed, simply divide by the square footage of the sheet size you will be using to find the number of sheets needed. For example, if your wall surface is 1,000 square feet and you're using 4′ x 8′ sheets, then the number of sheets needed is 1,000 ÷ 32, or 31.25.
How much does it cost to drywall a room?
Drywall installation costs $1,904, with a typical range of $992 and $2,956. This cost translates into a price of $1.50 to $3 per square foot for materials and labor. Most homeowners pay $2 per square foot, depending on the number of rooms and the level of finish.
How much would it cost to drywall a 1500 sq ft house?
Cost To Hang Drywall Based On House SizeHouse Size (Square Footage)Drywall Square FootageTotal Dryall Installation Cost1,5005,650 – 6,500$5,200 – $20,3002,0006,500 – 7,900$6,650 – $23,7502,5007,900 – 9,400$7,950 – $28,4503,0008,000 – 10,000$8,300 – $29,000
How much should I pay to hang drywall?
Drywall installation costs $1.50 to $3.50 per square foot of wall surface or $30 to $70 per sheet, including labor and materials for hanging, taping, and finishing. The cost to install a drywall ceiling is $1.50 to $3.80 per square foot. Hanging drywall costs $0.85 to $1.90 per square foot without taping or finishing.
How much should I charge for drywall work?
People typically charge about $1,800, or between $955 and $2,550 to hang drywall. Low-end jobs can run about $450 while high-end jobs reach $5,000 or more. That means you should charge between $1 and $3 per square foot for materials and labor for an average project.
What is the average cost to hang and finish drywall?
Average Cost of Sheetrock or Drywall Installation The average cost to hire a professional to hang drywall is $2.40 per square foot using standard ½” drywall.
How much does it cost to drywall a 1200 sq ft house?
For this reason, drywall installation has a range of associated costs. The national average cost to install drywall is between $1,600 and $3,500, with most homeowners spending around $2,000 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.
What is the cost of drywall per sheet?
Sheetrock and drywall costs $10 to $20 per sheet or $0.30 to $0.50 per square foot on average, depending on size, thickness, and type. Gypsum plasterboard prices are $12 to $16 per sheet.
How much does a sheet of drywall cost?
Standard Drywall The price range for a 1/2-inch sheet is $12 to $18. 5/8-inch panel pricing is between $14 to $20, while the price for a 3/4-inch panel ranges from $20 to $30.
How many 4x8 sheets do I need?
Divide by the total square footage by the square footage of a sheet of plywood to find the number of sheets required to cover the space. A 4×8 sheet of plywood is 32 ft2. For example, if the area to be covered in plywood is 800 ft2 then 25 sheets of plywood will be needed to cover it.
How much does it cost to drywall a 1200 square foot house?
For this reason, drywall installation has a range of associated costs. The national average cost to install drywall is between $1,600 and $3,500, with most homeowners spending around $2,000 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.
How many square feet is a sheet of drywall?
15 x 9 = 135. For two walls: 270 square feet. Measure the ceiling: 15 x 10 = 150 square feet. Add the areas together: 180 + 270 + 150 = 600 total square feet....How to Estimate Drywall or Sheetrock.Sheet SizeSquare Feet4×8324×9364×10404×12481 more row•Jan 20, 2021
How much does it cost to hang drywall on a ceiling?
Average Drywall Ceiling Installation and Finish Cost The average cost to hang and finish drywall on a ceiling is $2.45 per square foot when a contractor is hired, or about $1,225 for 500 square feet.
Fire Rating & Moisture Resistance
Each type of gypsum board or the drywall has a different level of both fire and moisture resistance. Depending on your project type and architectural specifications, your team needs to ensure that materials pricing is for the correct type of drywall.
Type X or Type C Drywall
Produced with specialty non-combustible fibers, Type X drywall is intended for areas that require a higher fire rating, such as a laboratory, manufacturing area, or garage. The American Society for Testing and Materials (ASTM) lists a fire-resistance rating of not less than one hour for 5⁄8” thick boards or 45 minutes for ½” boards.
Regular Drywall
Standard drywall boards are typically 3/8″ thick and 4X8′. If your project does not have any specific requirements like a bathroom, garage, or kitchen, then this is the drywall that should be in your construction bid.
Paperless Drywall
An improved version of typical drywall is a paperless product made from fiberglass. This type of gypsum board is durable, moisture resistant, and easier to cut into irregular shapes.
Moisture Resistant Drywall
Moisture resistant drywall, or green boards, has an outer paper covering that makes it the ideal material for humid areas like bathrooms or basements; however, cement board should be used for shower and bath surrounds. Its light-green coloring on one side will help you identify it and keep it separate from your regular drywall.
How to measure for drywall?
Once you’re sure that the framing or other backing material is sound, you can begin taking measurements for the first sheet of drywall. When measuring the length of a wall or ceiling, I usually take two measurements—one where each edge of the panel will be. If the measurements are close, I usually go with the smaller measurement. If there’s quite a difference, say 5/8 in. or more, I use both measurements and cut the panel out of square. Check for square by placing a 24-in. framing square in each corner.
How to carry drywall panel?
Both carriers should be on the same side of the panel, with the same hand under the bottom edge and the other hand steadying the top. They should hold the panel 1 ft. or more in from each end and let the panel lean against their shoulders. Working together like this is the least strenuous way to carry drywall. However, if you are forced to work alone, there are a number of specialized carrying tools available.
How to find the center of an electrical box?
If you’re routing out for electrical boxes after tacking the panels in place, using locators is an easy way to find the center of the boxes. They snap into place over the wires in the outlet. Then, once the drywall is tacked in place, they punch through to mark the center of the box.
What to avoid when marking and cutting openings before attaching drywall?
What to avoid: Marking and cutting openings before attaching the drywall often results in miscuts, which means gaps or busted out edges that have to be patched.
How to make sure your panels are square?
Check the corners: Use a 24-in. framing square to make sure that the corners are square. If not, cut your panels accordingly.
Can you cut drywall with a utility saw?
In some cases, it is easier to cut drywall with a drywall utility saw or a drywall saw. When sawing, always cut from the face side of the panel to avoid damaging the finish paper as you push the blade through. The saw cuts on the forward stroke, but take care not to rip the face paper as you pull the saw back. (The saw teeth will damage the back paper slightly on the forward stroke, but this is not a cause for concern.)
Can you hang drywall over window jambs?
If the door and window jambs are not yet installed (which is best from the drywall contractor’s viewpoint), you can hang the drywall right over the openings before cutting them out. With the panel installed, cut along each side of the opening with a drywall saw. Score along the top of the opening on the back of the panel with a utility knife, snap the panel forward, and cut off the waste with a utility knife.
How to calculate drywall layout?
For all 4-foot-wide sheets simply measure the perimeter of the project, divide by 4 and round up to find how many sheets you’ll need. The key to calculate the layout of your drywall is minimizing joints and not worrying about waste. You’ll cut out windows, doors and other openings, so ignore these while calculating.
How to determine how many sheets to use for a wall?
When determining how many sheets you need, simply measure the wall at its tallest point and multiply by its length. You can trim the sloping section during installation.
How to estimate sheetrock?
For an estimate, use the calculator above or follow these steps: Drywall needed = total area/sheet size. Multiply the length and height of one wall.
How much to add to drywall project?
DIYers are more likely to end up with excess waste than those who hire a nearby drywall installer. Best practice is to add 10% to your overall project if you’re new to drywall for a couple reason:
Where do taper joints go on drywall?
Tapered joints exist on the long sides of the drywall sheet . The taper starts a couple inches from the edge and thins slightly as it reaches the edge. When placed together, these tapers create a shallow channel for tape and mud without creating a bulge in the wall.
How wide is gypsum board?
Lumber yards sell gypsum board in predefined sheet sizes: 4 or 4.5 feet wide and 8, 9, 10, 12 or 16 feet long. Understanding the two widths helps you determine layout.
Why is it so hard to calculate gypsum board waste?
It’s difficult to calculate gypsum board waste because it varies so much from home to home. Waste comes from two main sources:
What is a drywall calculator?
The drywall calculator, alternatively called the sheetrock calculator, is a handy tool for determining how many drywall sheets you need to cover the walls (and the ceiling) of your room. This drywall estimator can be used together with our paint and wallpaper calculators to finish the interiors of your house. Input your drywall measurements to quickly estimate the number of sheetrock panels you have to buy, and make sure to never overspend on drywall again!
How thick is drywall?
There are several drywall thicknesses available. 1/4” and 3/8” (6.5 mm) thick panels are suitable for renovating ceilings and curved areas. 1/2” (12.5 mm) thick sheetrock sheets are the most common and are a perfect choice for standard walls. You should use thicker drywall sheets (more than 5/8” or 15 mm) on walls that you want to be sound (or fire) proof.
What is drywall (sheetrock)?
Drywall is a construction material that also has other names: plasterboard, wallboard, gypsum panel, sheetrock, or gypsum board. The current version of gypsum board was developed in the first half of the 20th century. Its popularity rose during World War II, when the cost of building materials was very high, and there was a significant lack of qualified workforce. Fortunately, drywall had a low price and was easy to install, even in a DIY setting.
What is the common name for drywall joint compound?
Here, we provide you with a list of the necessary drywall tools and materials to make sure that you have not forgotten anything: Drywall mud – the common name for the joint compound. With drywall mud , you will be able to join sheets of drywall and cover any holes.
What happens when drywall is exposed to fire?
When the drywall is exposed to fire, the water in gypsum becomes free and evaporates. What remains is the calcium sulfate: Ca₂SO₄. This process is called calcination, and it requires vast amounts of energy. This energy cost means that it takes some time for the fire to break through the drywall layer.
What type of drywall is enhanced with glass fibers?
Type X drywall contains glass fibers that prevent the drywall from cracking as the water inside evaporates. Type C is enhanced with the same glass fibers as type X but also contains vermiculite. This substance expands (increasing its volume while decreasing its density) when exposed to high temperatures, so it fills in any emerging cracks in the drywall.
What is greenboard drywall?
Greenboard drywall — You can recognize it by its green paper covering. The covering was augmented with water-repellent molecules. This type of drywall costs more but does not soften when exposed to humid conditions. It is a natural choice for rooms with a high moisture level, for example, a kitchen.
Where to measure drywall?from wikihow.com
Measure to the center of the farthest support piece the drywall gets to and transfer that measurement to the drywall.
How thick should drywall be?from wikihow.com
Choose another answer! When the drywall is thinner than 1/2 inch thick. Nope! Most of the time in new construction, you'll use drywall that's 1/2 to 5/8 inch thick. However, the thickness of the drywall isn't a factor in whether you can position your drywall so the end isn't supported by a strapping piece or joist.
How to measure sheetrock for a 4x8 ceiling?from doityourself.com
Because the sheetrock material is 4x8, you calculate the total square feet of the ceiling and the walls and then divide it by 32. Then you order the materials based on the measurements.
Why do you need a friend to install sheetrock?from doityourself.com
Because the sheetrock is so heavy, you are going to need a friend or two. The mudding and taping aspect of installing sheetrock is something else that can be done without professional assistance, but at the same time with practice it is something that could be done. Continue reading below Our Video of the Day.
How to apply mud to seams?from wikihow.com
Use a drywall knife to apply a liberal amount of mud to a seam. You don't have to worry about getting it perfect the first time through; you'll wipe off the excess after you apply the tape. Make sure you cover the seam entirely.
How much does drywall weigh?from wikihow.com
Actually, it is not unlike hanging wallpaper. The biggest problem lies in the sheer size and bulk of the pieces. Not only do they weigh about 40 lbs. each, but their size is unwieldy and awkward.
How to mark studs on a floor?from wikihow.com
Some studs are 1/2" off in either direction, sometimes due to sloppy carpentry work by the builder. A good idea is to run masking tape along the floor while you have the studs exposed and mark the center line of each stud with a high visibility marker.
How to measure the floor of a room?from wikihow.life
Article Summary X. To measure the floors of a room, measure the length and width of the room at the widest parts with a tape measure . Then, multiply these numbers together to find the area of the room in square feet.
How to calculate square footage of a room?from bestlaminate.com
To calculate the square footage, you will multiply the length of the room by the width of the room. You will measure this from the inside of the room.
What if my room has a complex shape?from calculife.com
If your room has the shape of a circle, triangle or oval, then you need to use the appropriate calculator.
How to find the final amount of flooring needed?from bestlaminate.com
Add the Waste Amount to your Total Room SQFT to find the final amount of flooring you need to purchase: Waste Amount + Total Room SQFT = Final Square Footage
How to figure out the area of a skylight?from wikihow.life
Ceilings sometimes have skylights, and the area of these must be subtracted from the total ceiling area calculated in step three. Measure the length and width of a skylight to get its area. Then, multiple the length and the width. Now, you have the area of the skylight.
What is a rectangle room?from gigacalculator.com
A rectangle room is one of the simplest types of area shapes for which square footage can be calculated. A square room will be even simpler since the length is equal to the width. For example, a 10x10 room is 100 sq ft (10 2 ), a 15x15 room is 225 sq ft (15 2 ), while a 20x20 room is 400 sq ft (20 2 ). However perfectly square spaces are rarely encountered outside of classroom tasks.
How to measure square footage of flooring?from bestlaminate.com
To measure the total square footage of flooring you will need for your project, you must find the square footage of all the areas in the room that you are going to install your new floor in. This includes little nooks and crannies. When you’ve done that, you just add all of those measurements together.
