how do you measure carpet

• Divide the length of the room that the seams will run perpendicular to by the width of the carpet roll you have chosen. ...
• Multiply the length of the wall parallel to the strips of carpet by the number of strips of carpet that will be across the room. ...

Full Answer

How to measure for carpet in 4 simple steps?

• It’s important to take every single measurement of all the areas of the room, including bay windows, recesses and alcoves. ...
• Always start by measuring the widest point of the room and at the floor level. ...
• Never estimate your measurements. ...
• Be sure to measure right into doorways. ...
• All the carpets you choose for your rooms must run in the same direction.

More items...

How to measure for carpet like a professional?

• Measure the length using the distance from one wall to the opposite wall.
• Measure the width from wall to wall.
• Add 2 to 4 inches to each side. This accounts for waste, doors and slanting walls. ...
• Multiply the length times the width or enter those into the calculator above. This is your total square footage for that room.
• Repeat this process for each room.

How to measure your home for carpet?

The Basics of Measuring How Much Carpet You Need

• Direction of the Pile. The most important rule in carpet is that you must always keep the carpet running in the same direction.
• Keep the Pile Direction Consistent. ...
• Rooms Wider Than the Roll of Carpet. ...
• Closets. ...
• Pattern Match. ...
• Go With a Pro. ...

How to select carpet for your home?

When you’re choosing the best carpet for your space, it’s important to consider:

• Style: Style isn’t just limited to color. ...
• Lifestyle: If you’re expecting muddy paw prints and rogue juice spills, you’ll want to choose a stain-resistant fiber.
• Location: Higher-traffic areas require more durability than a carpet tucked away in a guest room.

More items...

How much extra to add to carpet?

Where to measure for stairs?

How wide is a broadloom carpet?

How many inches to add to wall to wall measurement?

How to calculate square footage of a room?

How to measure between two walls?

How many square feet are in a yard?

See 2 more

Is carpet sold by the foot or yard?

Most retailers sell carpet by the square foot, but some sell it by the square yard. Carpet is often sold in pre-cut rolls of either 12, 13.5 or 15 feet width.

How much does it cost to carpet a 12x12 room?

The average cost to carpet a 12x12 bedroom is $250 to $1,100 total or $2 to $8 per square foot to install. Recarpeting with plush, frieze, or wool carpet adds more comfort and insulation to bedrooms. A memory foam padding underlay creates softer bedroom flooring.

How do I measure my room for a carpet?

0:312:29How to Measure a Room for Carpets & Vinyl - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply take measurements of the longest. And widest parts no down your measurements on your sheet ofMoreSimply take measurements of the longest. And widest parts no down your measurements on your sheet of paper. When ordering your carpet. You'll be asked for your rooms length as carpet.

How do I estimate carpet replacement?

Carpet Installation Cost Carpet installation costs, on average, $700 to $2,000 to redo an area up to 200 square feet. Carpet material prices average $2.50 per square foot, or $10 per yard. Underneath padding costs about $0.60 per square foot.

What kind of carpet is popular now?

Perhaps the most on-trend, and definitely most popular carpet trend, is natural fiber rugs, materials like jute, sisal and seagrass. Jute rugs grace the floors or so many homes due to their hardwearing nature and versatility, so just take it a step further and go wall to wall with it.

Is Home Depot carpet installation really free?

Lowe's and Home Depot offer free basic carpet installation if you meet certain purchase requirements. Anything your job requires beyond their limited definition of a “basic install” will incur additional hefty charges and fees.

How many yards of carpet do I need for a 12 by 12 room?

The room is square since the length and width are the same. Hence, we can apply the area of the square to compute the area of the carpet needed to cover the room. Hence, the answer is 16 square yards.

How long is a full roll of carpet?

A lot of carpeting is laid out in 12′ rolls, which means that your room can be measured by standard units of 12′. But The tricky part here is that other carpeting roll widths vary, with some in 15′ and even rolls that involve half-measures, like 13'6″. Also, many types of carpeting are measured out in linear feet.

How much bigger should the carpet be?

Make sure your rug is at least 6″ wider (8″ is ideal) than your sofa on both sides. Typically run the rug the length of the sofa. Give 30″ to 36″ of a walkway between large furniture pieces (if your living room allows for it) if not then at least 18″-24″. That will help to inform your rug size.

How much does it cost to carpet 3 rooms?

How much does it cost to carpet three bedrooms? The total cost to carpet three bedrooms measuring an average 500-square-foot area runs from $1,750 to $5,500. Actual estimates vary based on room dimensions.

Is carpet Coming Back in Style 2022?

Expressing our creativity in bold, imaginative and innovative ways has been a trend this year, so it's no wonder carpet is making a comeback in a big way. From pairing contrasting colors to rich jewel tones, geometrics and wild animal prints, our 2022 carpet trends are all about self-expression.

How often should carpet be replaced?

5 to 15 yearsWhile carpet has changed over the years, today, its lifespan is usually anywhere from 5 to 15 years. The length of time that a specific carpet lasts depends on the type of carpet, carpet cushion, carpet fibers, and wear and tear the carpet is exposed to.

Which is cheaper carpet or laminate?

While the up-front cost of carpet might be tempting, over time laminate flooring is cheaper than carpet. Laminate flooring is made to last and is nearly double the lifespan of an average carpet. Flooring is considered an investment, as it really becomes a permanent fixture in your home.

How many yards of carpet do I need for a 12 by 12 room?

The room is square since the length and width are the same. Hence, we can apply the area of the square to compute the area of the carpet needed to cover the room. Hence, the answer is 16 square yards.

Is carpet or vinyl flooring cheaper?

Carpet is a more expensive product than luxury vinyl flooring when factoring in cost of installation and upkeep. Compared to carpet, vinyl flooring is much easier to clean/disinfect/maintain/replace especially versus broadloom carpet.

How many carpet tiles do I need for a 12x12 room?

For a room that measures 12 feet wide by 12 feet long, using 24-inch square carpet tiles, the calculation looks like: 12' x 12' = 144' (square footage of room) 2' x 2' = 4' (square footage of each tile) 144' / 4' = 36 tiles.

How much to add to total carpet?

Add 5% to the total. This makes allowances for seams and other extra carpet needed to complete the job.

How much does it cost to hire a carpet installer?

The cost to hire a Carpet Installer to measure your home might be $75 to $125 or more for a large or complicated home, but could be well worth the investment, by potentially saving you money and also give you peace of mind.

How wide do you have to be to have seams?

You must have seams if your rooms are wider than 12 feet. (unless you order carpet that is wider than 12 feet)

How to calculate square footage of a room?

Make a list of your measurements and multiply the length by the width of each room. Then add them up for a total square footage. It should look like this:

How many yards is 15 x 20?

A simple 15 x 20 room would add up to 33.33 yards. That is 15 x 20 = 300 divided by 9 = 33.33 yards.

Do carpet salespeople measure?

Some carpet salespeople measure very accurately and can help minimize the amount of material waste, thus saving you money.

Can you hire an independent carpet expert?

You could hire an independent expert to measure your home to verify the amount a material you actually need. You can discuss room sizes, carpet styles and types, best carpet nap direction, seam placements and other money-saving options.

How to measure square feet of carpet?

Measure and record the width of the carpet on the outside of the roll in feet. Multiply the linear feet by the width measurement to get the final square feet measurement.

How to measure a roll of carpet?

The most accurate way to measure a roll of carpet is to simply unroll and measure it . However, the obvious method is not always the most realistic. In some situations you might have multiple rolls of carpet that need to be measured and unrolling all of them could be a hassle. Fortunately, there is a way to learn how to measure a roll ...

How to find the area of a carpet?

Find the area of the entire roll of carpet. Separately, find the area of the hole in the center of the roll. Use the mathematical equation that allows you to find the area of the carpet to figure out these numbers. This equation for area is Pi times r^2. Pi is equal to approximately 3.14. The letter "r" symbolizes the radius. The radius is exactly half of the diameter.

How to convert square feet to yards?

Convert square feet into square yards if necessary. To do this, divide the square footage figure by 9.

Can you measure a roll of carpet without unrolling it?

There are measuring wands available at hardware stores that will instantly measure a roll of carpet without needing you to unroll it .

How much to add to the width of a carpet?

So, for the above example, you would need to add 3” to the length (if you are seaming two pieces of carpet on the side) and 3” to the width (if you are seaming two pieces of carpet on end).

What is the most important rule in carpeting?

Direction of the Pile. The most important rule in carpet is that you must always keep the carpet running in the same direction. You can't turn one piece sideways to the other. Doing so will cause the two pieces to look very different from each other, sometimes even like different colors.

What do the lines on a carpet mean?

In this image, the lines represent the direction of the carpet pile. Note that the shortest measurements would result in the carpet running in different directions. Cheryl Simmons

How deep is a closet?

If the closet is standard size (usually about 2'6" deep) and has a sliding door that is on a track, then the direction of the carpet is not as important, unless it is a patterned carpet. Because the track divides the carpet, it will not be noticeable if the pile is turned in the closet.

Can you join two pieces of carpet together?

If you have to join two pieces of patterned carpet together, you need to be sure that the pattern will line up on both pieces.

Do you need to add pattern match to carpet?

The amount for pattern match must be added on to every piece of carpet that will be seamed together, except for the first piece. This is because the installer will lay the first piece down, and then have to shift the next piece to get it to line up with the first.

Step One - Make a Drawing

Grab a 25-foot or longer tape measure and a pen and paper. Draw a simple diagram of your home, or use a computer program. I did this drawing on my computer using a simple "paint" program, you likely have a paint program on your computer too, look in "accessories" in your program files. A hand drawing will do too.

Step Two - Measure

Now you need to measure each room and write down the measurements on your diagram. We will round up each measurement to the nearest 1/2 foot mark. if your room is 15 feet 3 inches long, round it up to 15 feet 6 inches or 15.5. (We will use the decimal .5 instead of 6" inches)

Step Three - Calculate

Make a list of your measurements and multiply the length by the width of each room. Then add them up for a total square footage. It should look like this:

Step Four - Add extra for seams

Add 5% to the total. This makes allowances for seams and other extra carpet needed to complete the job.

Measuring Carpet for Stairs

Measuring for stairs can be very tricky. Some stairs are wrapped over one or both sides, some have to be upholstered which may require additional material, some are pie shaped and are more difficult to measure, some have landings that must be considered.

How to measure carpet area?

To measure for a carpet, measure each area individually following the steps listed below. Figuring carpet area means multiplying width times length for each area and adding them together. You’ll follow slightly different methods for rooms and stairs.

How wide is a roll of carpet?

How Carpet is Sold. Retailers sell carpet in precut widths on a roll, most commonly 12 feet in width. 13.5- and 15-feet widths are also available. If you have a room 10 feet wide by 10 feet long, you’ll need to purchase a 12 foot by 10-foot section of the roll. A couple of notes to consider before purchasing:

What is remnant carpet?

Carpet remnants. These common roll widths means you’ll purchase more carpet than you actually need, typically about 10% to 20% more. These extra pieces are called remnants. Use them in out-of-the-way spots like closets.

How to calculate square footage of a room?

Multiply the length times the width or enter those into the calculator above. This is your total square footage for that room.

What does it mean to choose the right carpet for your home?

Choosing the right type of carpet for your home does mean varying costs and design choices. As part of your flooring research, look into the various types in our carpet buying guide. Then calculate carpet costs by type.

How to find the number of feet on stairs?

Divide by 12 and round up to get the number of feet. Measure the width of the stairs and round up to the nearest foot . Multiply the width from step 4 by the length from step 3. Add in any landings you have. Multiply the width and length of the landing. Add that number.

How many inches is 7+7+2?

7+7+2 = 16 inches. 7 inches for each rise and run plus two inches for the nose and overage

How much extra to add to carpet?

This allows for walls that are not perfectly straight and gives you a bit of a safety net. When measuring, add about 3 inches to each piece of carpet you will need.

Where to measure for stairs?

When measuring an area that leads to stairs going down (such as a hallway or landing), be sure to measure around the nosing (the ledge at the top of the stairs). Hold your tape measure against the opposite wall (or halfway into a doorway), and wrap it all the way around the nosing until it touches the back (riser) of the stair below . Your carpet will need to be this measurement in order to wrap around the nosing.

How wide is a broadloom carpet?

Broadloom comes in specific widths—usually 12 feet or 15 feet, but sometimes 13 feet 6 inches.

How many inches to add to wall to wall measurement?

Add 2 inches to the wall-to-wall measurement. Example: One wall has an entry door and the opposite wall has a door into the bathroom. Measuring to the middle doorway you find 2 inches for each. Because these are on opposite walls, you need to add both to the wall-to-wall measurement, so add 4 inches.

How to calculate square footage of a room?

You now have the measurements needed, with allowances for doorways and appropriate measurements for stairs included, to calculate the square footage of the room. Multiply the width of the room by the length of the room. Note this total.

How to measure between two walls?

Lay your tape measure against the wall at one end of your room, and then extend it to the opposite wall. Or, use a laser distance measurer to find the measurement between the two walls. Note this number as the length.

How many square feet are in a yard?

There are 9 square feet in 1 square yard; to convert square feet into square yards, divide your total by 9.