- Step 1: Measure from wood framing on the pocket side to wood framing on the closed side. This is your rough opening width (RO width). To determine the door size you want, take the RO width and subtract 1 inch. ...
- Step 2: These calculations allow room for some of the door to be hidden in the pocket to block the view of the interior pocket. ...
What is the standard size of a pocket door?
Standard pocket doors typically come in the same sizes as regular hinged doors, between 30 and 36 inches wide and 80 inches tall. But, you need to consider the overall dimensions for the entire system, which are much larger. Overall, pocket door systems can range from 51 to 162 inches wide and 86 inches tall or more.
What is the standard height of a pocket door?
To install a 36 inch pocket door would need an opening of approximately (36 x 2)+1.75 inches = 73.75 inches. If you intend having a double door system with them meeting in the middle and disappearing into two pockets then you need to double the estimated width. The estimated height for all pocket door installations would be about 85.5 inches.
What is the rough opening size for a pocket door?
WIDTH. Rough opening width is 1 1/4″ over nominal door width. This provides for 5/8″ clearance between the jamb and the wall. This clearance is necessary for the pocket on the strike and the projection of the hinge screws.
What is the rough opening for a 36 pocket door?
Similarly, you may ask, what is the rough opening for a 36 inch pocket door? The rough opening will be more than twice as wide as a usual one. The width is almost always two times the actual finished door with plus one inch. For example, a 2-foot 8-inch door (32 inches) the rough opening needs to be 65 inches. The height of the rough opening off the rough floor surface is usually 84.5 inches.
How much bigger should a pocket door be than the opening?
The open doorframe should be twice the width of the intended door slab, plus 1 inch. So, the rough opening for a 30-inch door slab should be 61 inches. Height should be the vertical length of the door slab, plus the thickness of the door track and desired clearance (about 1 inch, though product dimensions vary).
How much room do you need for a 32 inch pocket door?
Check That You Have Enough Space A pocket door requires a “sleeve” inside the wall to retract into. For a traditional 32-inch-wide interior door, you'll need at least 66 inches of linear wall space: 32 inches for the door and the rest for the housing.
How big does the track need to be for a 30 inch pocket door?
56 3/4 inchesSeries 1 - Heavy Duty Pocket Door Kit with Pre-Cut Track and Hardware (30 inch Door- Track Size- 56 3/4 inches)
What dimensions are needed for a pocket door?
A standard sliding pocket door has the same sizes as a corresponding hinged door. It typically measures 30" or 36" in width and 80" in height. It is also possible to build customized solutions having very large or very small passage sizes.
How much room do you need for a 36 inch pocket door?
Consider Pocket Door Dimensions Double the width of the desired door, or pair of doors, to determine the wall space that's needed to install the pocket door frame. For example, 48 inches is needed to install the frame for a 24-inch pocket door, and 64 inches is need to install the frame for a 32-inch pocket door.
What's the rough opening for a 36 inch pocket door?
For 36″ door, you will need rough opening to 2 inches wider & 2-1/2″ taller than the actual door size, so, if you are installing 36″ wide interior, exterior, barn, bifold or pocket door, the rough opening will be 38″ wide and 82-1/2″ tall.
How big is the rough opening for a pocket door?
The width of the rough opening is two times the door's width plus one inch—for example, if your door is 34″ wide, the opening should be 69″ wide.
How thick does a wall need to be for a pocket door?
In terms of wall thickness, a pocket door system can usually be installed on a plastered wall with: a thickness of 107 / 125 mm for hinged doors (e.g. Absolute Swing model); a thickness of 90 / 107 / 125 /145 mm for sliding doors (Evolution model); a thickness of 170 mm for overlapping sliding doors (Staffetta model).
What is the rough opening for a 2ft pocket door?
Formula for double units: 2 x door width + 2½” = rough opening width 1 x door width + 4½” = rough opening width Stock frames and double heads are for 2x4 stud with ½” sheet rock construction. For double pocket doors, use two single frames and one double head.
What is the rough opening for a 28 inch pocket door?
A: You typically need 29 inches of additional space for a 28 inch door, one extra inch beyond the door width. You would have to trim the 2 inches off the track plate and I don't believe it has that much play. I trimmed mine when I was doing two doors that meet in the middle, but I only needed one inch between them.
Can I use any door for a pocket door?
As long as the measurement is correct for the pocket opening, the door is the right thickness, and the door hasn't been pre-drilled for a standard door lockset or hinges, you can use any kind of door for a pocket door.
Can a pocket door be installed in an existing wall?
The pocket door system can be installed against the existing wall. This is done by creating a false stud wall along the side of your existing one with a space for the frame, the Rocket Pocket is only 100mm wide including plasterboard so you will not lose lots of space in the room.
What is the rough opening for a 32 pocket door?
A: Hello, the rough opening dimension is 84-1/2" x 65-3/4", height and width. Helpful?
How thick does a wall need to be for a pocket door?
In terms of wall thickness, a pocket door system can usually be installed on a plastered wall with: a thickness of 107 / 125 mm for hinged doors (e.g. Absolute Swing model); a thickness of 90 / 107 / 125 /145 mm for sliding doors (Evolution model); a thickness of 170 mm for overlapping sliding doors (Staffetta model).
What is the rough opening for a 28 inch pocket door?
A: You typically need 29 inches of additional space for a 28 inch door, one extra inch beyond the door width. You would have to trim the 2 inches off the track plate and I don't believe it has that much play. I trimmed mine when I was doing two doors that meet in the middle, but I only needed one inch between them.
Can you put a pocket door in a bathroom?
Pocket doors are a great solution for smaller spaces that lack the wall space for a full swing door. This makes them perfect for small bathrooms, closets and connecting those two areas, for example between a master bath and the walk-in closet.
What is pocket door?
Here's your ultimate size and dimension guide to single and double pocket doors. Detailed charts, illustrations and tables. Pocket doors serve as good interior doors because they are a space-saving door design. They are commonly used for powder rooms but also doorways into adjacent rooms like a kitchen into a dining room.
Can a pocket door be a stud wall?
A stud wall also has to be appropriately designed to hold a pocket door. The door itself can be whatever width and height it needs to be for the doorway, the adjoining wall has to be able to hold the door meaning it’s going to take up more floor space than a typical stud wall.
Can pocket doors be installed in a solid wall?
Pocket doors can potentially be difficult to install, a solid wall is going to need to be planned ahead with a cosmetic side wall attached to accommodate the space for the pocket door to slide into when open.
Can pocket doors be single doors?
They can be a single door or double doors. They are great space-saving door options for interiors and ideal if you prefer an entry between rooms remain open but once in a while like to close it off. Check out our pocket door charts below.
Can you add a pocket door to a home?
Although it can be done, it usually isn’t recommended to add a pocket door which wasn’t part of the original home design , as it requires more building materials and labor than would typically be expected to replace a door.
Is a pocket door the same as a double door?
Single door pocket doors are the same as double doors, other than they only need one side of the door opening to be built according to the needs of the door sliding inside the wall.
How to measure for a pocket door?
Determine the size for the rough opening. According to Old House Online, standard doors are 80 inches high. Use the height of your door (or doors) to determine measurements for your rough opening. For example, if your door is 80 inches tall, the minimum height of the rough opening would be 84 1/2 inches. The width of your rough opening for the door generally will be two times the width of the door plus 1 inch. Refer to the pocket door rough opening chart included with your pocket door kit if you are using a kit and a chart is included.
How to determine the size of a pocket door?
Determine the size of a single door or pair of double doors that suits your purposes. Standard door widths range from 24 inches to 32 inches. Double the width of the desired door, or pair of doors, to determine the wall space that's needed to install the pocket door frame. For example, 48 inches is needed to install the frame for a 24-inch pocket door, and 64 inches is need to install the frame for a 32-inch pocket door. For double doors, double the width of one door and multiply the result by two. If you're installing double doors, Extreme How-To notes it is important to consider how the two will fit together – whether the doors will meet in the middle, or slide past each other on separate tracks.
What is pocket door?
Pocket doors provide an alternative to hinged doors where space is limited or more space is desired. This may be for a small powder room or the opening to a dining room or master bathroom. Pocket door frames are available with single and double doors.
How high is a standard door?
Measure Rough Opening. Determine the size for the rough opening. According to Old House Online, standard doors are 80 inches high. Use the height of your door (or doors) to determine measurements for your rough opening. For example, if your door is 80 inches tall, the minimum height of the rough opening would be 84 1/2 inches.
Where are double doors located?
Double doors may be located at the center of a wall in dining rooms and master bathrooms. Refer to your selection for the width of the door, or double doors, and make reference marks that define each side of the door opening on the face of the wall.
How thick should drywall be?
Adding the drywall to the studwork you will reach the required finished wall thickness dimension.#N#Here an example: 1 3-1/2″ stud work plus 5/8″ drywall on each side gives a finished wall thickness of 4-3/4″ 2 5-1/2″ stud work plus 5/8″ drywall on each side gives a finished wall thickness of 6-3/4″
Where to measure for eclisse frame?
Tip: Make sure to measure from the finished floor level since that is where you will need to install the ECLISSE frame from.
How thick is a pocket door?
Pocket door hardware kits are usually available for doors 1-1/8 inches to 1-3/4 inches thick by 6 feet, 8 inches high. Look for a high-quality pocket door frame ...
What is pocket door?
A pocket door slides into a frame of metal and wood that is installed when the wall is constructed. In place of solid studs, the pocket-door frame utilizes “split studs”—one on each side of the door—which the door slides between to open and close.
Why are pocket doors so popular?
Pocket doors have long been popular because they “disappear” into a wall, so there’s no swinging door in either adjoining room. The “disappearing” aspect of the doors presents a neat aesthetic option to a home, and for certain floor plans this feature is critical to avoid doors that interfere with the natural flow of foot traffic. The space-saving design of a pocket door can be a handy solution for small living areas, such as bathrooms, where a hinged door might occupy too much floor place.
Where do you put wheel hangers on a car?
Slot the wheel hangers into the metal header track.
Can you cut pocket door headers with a hacksaw?
Because the pocket-door header contains a metal channel, we cut the metal separately using a hacksaw.
Can you replace a door latch with a flip out pull?
Instead of a door latch, you can remove the lock mechanism and replace it with a flip-out metal pull, so you’ll have a handle to tug the door closed when it’s fully recessed in the open position. You’ll also find options such as “soft close” actuators as well as kits that hide the door-guide hardware.
Do you need to paint a door if it is not finished?
Note that if your door is not already finished, you will need to paint or stain all edges and faces to prevent it from warping.
How to measure for a replacement door?
Just to be safe, measure the area where your door will go, too. Record the height and width of the door frame space. This will help ensure that you select the exact right replacement door.
How to determine the size of a door?
Determining the size of your door is as simple as taking a few measurements and doing some basic math. You just need to find the height and width of the door using a measuring tool. Once you have measured these accurately, you can start on whatever your home project is, like replacing the door, installing a new style door, or decorating the one you currently have.
How to measure the thickness of a door?
Figure out the thickness of the door. Hold a tape measure to the edge of the door and record its thickness. Measure this edge on the door frame (known as the jamb), as well. These numbers should be close to the same, but it can be helpful to know both of them.
What do you need to measure for a new door and a frame?
If you're going to measure for a new door and a frame, what you need to do is measure the door slab itself. That will tell you what size door and frame you need to replace it with.
How tall is a door?
This is especially true for older doors. If the amounts vary, use the largest figure. The most common height for doors is 80 inches (200 cm).
Do you measure the door?
It is important that you only measure the door. Do not include any other elements, such as weather-stripping. Particularly with older doors, it is important to measure in more than one location, just in case the door is not perfectly rectangular. If the amounts vary, use the largest figure.
Is a door on your left or right?
If the door is on your right, it is a right-handed door. If the door is on your left, it is left-handed. Your door will also either be in-swing or out-swing. Determine both of these characteristics and record them on the diagram you made.
What is pocket door frame?
Framing a pocket door refers to the first stage of installing a concealed door. This makes a room more versatile, since it can be closed off from the rest of the house when necessary. This is a great way to maximize your living space, and with a lot of patience and a little bit of know-how, it is a home-improvement goal that you can accomplish for yourself. Here are some steps to help you as you learn how to frame a pocket door.
How big is a 1 by 4 door?
Generally, a 1 by 4 (2.54 by 10.16cm) plate will enable the door to clear the carpeting without cutting it. If there is no carpet, the brackets of most door kits can be installed directly into the floor. ...
How high should a header be for a new door?
Determine the height of the header by adding 3 1/4 inches (8.26 cm) to the length of the new door, and then add the height of the soleplate, which will only be necessary if the floor is carpeted.
How to determine if a wall is load bearing?
If you have a basement, you can easily identify a load-bearing wall by checking the direction of the joists in the ceiling of the basement.
How to check if a wall has electrical wiring?
Verify that the wall doesn't have any electrical wiring or pipes running through it. Look for switches or electric outlets on the wall. Use a stud finder with a wire-finding feature, which should be available and affordable at most hardware stores, to check for electrical wiring.
How big is a 2 by 4 header?
Use a section of 2 by 4 (5.08 by 10.16cm) as the new header. This will need to be 1 inch (2.54 cm) more than twice the length of the pre-existing header, since it will need to span the distance of the entire rough opening.
Do you need a ceiling support for a pocket door?
If you're installing a pocket door in a load-bearing wall, you may need temporary ceiling support while you replace the existing header. This might mean consulting a professional contractor.
