Considerations when measuring for outside mount plantation shutters:
- Look for any obstructions, such as locks, window cranks, latches, mullions and windows that open into the room. The...
- Once the appropriate louver and frame has been chosen, record these items on the order form.
- When you measure for the divider rail, measurements start where the bottom of the frame will...
How to measure for exterior shutters?
Steps to measure for exterior shutters: Inspect the Windows Observe and make note of any obstructions on either side of the window which may prevent proper... Measure Exterior Shutter Depth It is preferable for functional outdoor shutters to fit entirely within the window... Measure Window ...
How do you measure window recess for shutters?
Measure from the window to the wall or edge of the trim (not including any protruding sill or ledge at the bottom) to determine your recess depth. Outside mount shutters are measured to surround your window opening and mount to the wall just outside of the glass area, or on top of your existing trim.
How do you Mount shutters on a window?
Inside mount is a popular choice if your window is deep enough. Inside mount shutters fit inside the window opening and can be pushed back toward the glass for very deep windows, or they can be pulled forward to be flush with the wall. They can even be pulled out slightly past the wall to give you a little extra depth if needed.
How do I choose the best outdoor shutters for my Window?
Take this opportunity to check the window frame for wood rot that can be replaced in advance of installation. It is preferable for functional outdoor shutters to fit entirely within the window opening. Measure from the back of the side jamb to the front of the window casing.
How do I know what size exterior shutters to buy?
It is generally best to find a single width that works for all of your windows. The width that usually works best for decorative shutter is between 25% and 33% of the total width of your window including the window trim.
How do you measure yourself for shutters?
0:512:08HOW TO MEASURE SHUTTERS - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut measure from the top to the bottom of the window casing in three. Places. Top left center andMoreBut measure from the top to the bottom of the window casing in three. Places. Top left center and the top right down to the windowsill. Record the smallest height measure to the nearest 1/8.
Should exterior shutters be the same length as the window?
For the most authentic look, we recommend measuring only the window opening not including any frame or trim around it. Typically, the width of your shutters should be half of your total window width.
How do you measure for exterior vinyl shutters?
1:243:19How to Measure for Exterior Vinyl Shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipX here shutters should not exceed the window height measures the height from the top edge of theMoreX here shutters should not exceed the window height measures the height from the top edge of the window trim to the same point at the bottom.
How do you install outdoor mount plantation shutters?
1:573:01How to Install Outside Mount Shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace a level on the bottom frame then shift the frame left to right until it's straight once theMorePlace a level on the bottom frame then shift the frame left to right until it's straight once the bottom is level hold the frame in place by pressing it against the wall.
Can shutters be shorter than the window?
Shutters should be the same size as the window opening. Whether one or in a pair, when held up to the window they should fit as if they were going to be closed. Most of the time I see shutters that are incorrect in length and/or width.
Should shutters be taller or shorter than window?
Shutter Width The height of window shutters you should order is generally the actual height of the opening not counting the sill should you have one; however, many customers prefer to have the panels a little taller than the actual opening height.
What size shutters are best?
What slat size do most people order for shutters?3 ½” shutter slats are the most popular choice.This lovely kitchen features 2 ½” louvered plantation shutters in a custom color.3 ½” slats let in plenty of light and fit with any style of home décor.More items...•
How far should shutters be from window?
If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract. This of course does not apply to other shutter materials.
How thick should exterior shutters be?
Thickness, Width, Height Our default standard thickness is 1 5/16", but that can be varied from 7/8" to 2 1/4" to match existing exterior shutters. The length and height can be specified to the nearest 1/16" inch.
Can shutters be longer than window?
When measuring for shutter height, you can add an extra inch or two to make the shutters taller than your windows. This can give added style and enhance the look of your shutters. That said, this is a personal preference and you may prefer to have your shutters be the same height as your windows.
How do you replace house shutters?
1:567:13How to Replace Vinyl Shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou would drill a quarter inch hole and then you'd use those spikes to kind of do a little bit of aMoreYou would drill a quarter inch hole and then you'd use those spikes to kind of do a little bit of a friction fit. I'm not in love with these fasteners. So I did take a little bit different route.
What are standard shutter sizes?
These are available in standard heights ranging from 31" to 80" in 4" increments. There is even a Arch Top version that is available in 14" four board joined shutter that is available in heights from 45" to 94" in four inch increments.
How far should shutters be from window?
If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract. This of course does not apply to other shutter materials.
How do you fit window shutters?
0:034:12How to install window shutters with the right frame - inside mount - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere should be a 5 mil clearance gap between the frame and the wall. Hold the frame in place byMoreThere should be a 5 mil clearance gap between the frame and the wall. Hold the frame in place by inserting the plastic wedges make sure they're fitted in tight to stop the frame falling. Forward.
What size shutters are best?
What slat size do most people order for shutters?3 ½” shutter slats are the most popular choice.This lovely kitchen features 2 ½” louvered plantation shutters in a custom color.3 ½” slats let in plenty of light and fit with any style of home décor.More items...•
What is a mid rail?
A mid rail is a solid, horizontal piece of wood within the shutter panel. It aids stability on larger panels and is a design feature . giving separate slat control above and below the rail. If you have a window sill - Measure from top of window sill up to the center point of where you want your midrail to be.
What is an outside mount shutter?
Outside mount refers to the mounting of a shutter outside a window opening. Outside mount shutters can be installed
What is a frame in shutters?
A frame is the piece that surrounds shutter panels and creates support for them. It is the piece that is screwed onto the
How many sides can a shutter frame have?
This means that you can have a frame on all 4 sides (left, right, . top and bottom), 3 sides or 2 sides only (left and right). Below are diagrams that illustrate the number of frame sides we . suggest you order based on the style of shutter. As a rule of thumb, the more frame sides the better.
What does "finished dimensions" mean?
The dimensions you provide to us are interpreted as finished sizes. This means they are considered to be from edge to
Do you have to account for every frame side in your final dimensions?
Essentially you must account for every frame side in your final dimensions.
Why are shutters important?
The size of the shutters helps you plan your budget, as shutter pricing is based on the amount of materials needed. Plus, you’ll get to know your house just a little better. One window might be a slightly different size than another. That’s not a problem, but it does give one more example of why getting custom-fit shutters is so important ...
What is the high point of a radius top shutter?
Existing radius top shutter: The “high point” of a radius top shutter (also known as the “long side”) is the length from the bottom (B) of the shutter to the tip of the shutter’s arch (A). The “high point” will always equal the shutter length.
What is the high point of a window?
Here are the measuring guidelines for arched and circle top windows: The “high point” of a radius top window (also referred to as the “long side”) is the length from the bottom of the window (B) to the tip of the shutter’s arch (A). The low point (also known as the “short side”) begins at the bottom of the window ...
How to measure a window?
As each window is not created equal, the measurements you take at the top of the window will vary slightly from the one taken along the bottom. Measure the opening along the top of the window, then measure along the bottom.
How many half circles are there in a shutter?
The top of each shutter will be exactly one half of a circle.
Where is the low point of a window?
The low point (also known as the “short side”) begins at the bottom of the window ( B) and extends to the “low point” of the window arch’s radius (C).
Can you match shutters on a house?
Sometimes, homeowners want to match existing shutters on their home or additional buildings. If your stile and rail dimensions are different than our standard offerings, that’s okay. We frequently customize these elements for these types of situations.
How wide should a vinyl shutter be?
For the look of functioning shutters, panel width should be about half the width of the window. However, non-functional decorative exterior vinyl shutters will never be closed over windows and are installed only as decorative accents to improve ...
How many colors of molded through vinyl shutters are there?
Choose from 19 standard molded-through exterior vinyl shutter colors. If none of the colors meet your project requirements, select the DIY paintable version to finish yourself.
What is a straight top shutter?
A standard straight top has square corners and horizontal top. Arched top shutters have a straight edge on one side and a curved slope on the other. A springline dimension is required to order arch top shutters. Ascertain the springline by measuring from the top of the window down to the start of the arch.
Can you use screws on vinyl shutters?
Spikes are recommended for hard surfaces like masonry, brick, stucco or hardboard. Only screws can be used with board and batten shutters. Siding.
Is a bay window too wide?
Large or bay windows are often too wide to use panels that appear to be functional , so often a smaller panel is appropriate.
How to ensure shutter frame fits outside mount?
To ensure the shutter frame fits as an outside mount, you will need to include the width of the frame in your measurements. To do so, you can reference the specs, or print out the templates for your preferred frame from our outside mount measuring guide. Using the frame templates from our outside mount guide will help you visualize ...
What is an outside mount shutter?
Outside mount shutters are measured to surround your window opening and mount to the wall just outside of the glass area, or on top of your existing trim. You may also hear this referred to as direct mount plantation shutters.
How to measure for inside mount?
Inside mount is very easy and straightforward to measure for. Measure your window opening width and height in at least 3 spots to check for any variance, and then provide us with the smallest exact measurement for the width and height.
Can you put inside mount shutters on a window?
Inside mount is a popular choice if your window is deep enough. Inside mount shutters fit inside the window opening and can be pushed back toward the glass for very deep windows, or they can be pulled forward to be flush with the wall. They can even be pulled out slightly past the wall to give you a little extra depth if needed.
Can you install outside mount shutters on top of existing trim?
Outside mount frames can also be installed directly on top of existing window trim. Since outside mount shutters surround the window opening, they will hide any imperfections and eliminate gaps if there is a lot of variance in your window opening measurements. When you take your 3 measurements for width and height, if there is a lot of variance, ...
Do crank out windows have handles?
If you have crank-out windows, these usually have large handles, and locks with a lever that need plenty of clearance to raise and lower the lock. For this type of window, inside mount frames may get in the way of operating your window handles and locks.
Is an outside mount better than a window recess?
Outside mount is more forgiving if your measurements are off by a hair or two, since you are not having to work within the confines of the window recess.
How tall is a shutter arch?
If you are ordering an optional arch to add onto the top of a shutter panel you will need to subtract the height of arch from the overall finished height you desire. IE. If you want an 84” finished arch panel and the arch alone is 14” then you will need a 70” panel to make the finished shutter arch combination 84”.
How tall should shutters be for double windows?
The height of window shutters you should order is generally the actual height of the opening not counting the sill should you have one; however, many customers prefer to have the panels a little taller than the actual opening height. A couple of extra inches in height can be very attractive. Now for the double, triple and more windows. I suggest you divide the opening width for the double windows by 4 and use that as your panel width.
How to measure for shutters?
Measuring Windows For Shutters 1 Look at all the single windows first. 2 I suggest you divide the width of the window opening in half and use that as the width of the shutter panel you would order. 3 This dimension can be reduced by 2" without losing any of the visual effects. 4 If you have very short windows where the height is less than the width, I suggest you divide the width of the window by 4 and order your shutters that width. 5 The relationship between width and height is visually important. So making your panels narrower for those short bathroom windows and they will look appropriate.
How to order shutters for short windows?
If you have very short windows where the height is less than the width, I suggest you divide the width of the window by 4 and order your shutters that width.
How wide should triple windows be?
Triple windows should have the width divided by 6 for an appropriate width to order. Now having said all of this, it's your castle; and you may have a different thought on how the shutters should look. That's OK.
What is an arch shutter?
Arches are a great compliment to a window or door adding an architectural accent that enhances the value of a property in a big way. Arched shutters increase the accent value by completing the look of your arched openings.
How tall are rigid select shutters?
The Rigid Select vinyl shutters remove the guesswork. They are available as an integrated arch one-piece panel. So you would order 84” height as used in the previous example.
How much width do you need to subtract for shutters?
If you want your shutters to be operable — meaning, if you want them to open and close — subtract 1/2 inch from your width measurement to allow for clearance. This is your final Pair Width or Shutter Width. If you intend for your shutters to be fixed and only decorative, you don’t need to subtract for clearance.
How to measure window width?
Measure the width of each window individually from inside edge to inside edge to the nearest 1/4 inch (not including framing or molding). Take a measurement at the top, middle and bottom of the window. Record the smallest number. If your shutters will be operable (meaning you want them to open and close), subtract 1/2 inch from your width measurement to allow for clearance.
How to measure for two shutters?
If you'll have two shutters (one on either side of the window), divide your final window width measurement in half to determine the width of each individual shutter. If you are measuring for any windows that only need one shutter, you won’t need to divide.
Do you need to base shutter size on window trim?
On the rare occasion that there are no homes in your neighborhood with decorative exterior shutters, the rule of thumb is to base the shutter size off of the entire height and length of the window's trim.
How to measure outside mount for window?
When measuring outside mount for a window with a sill and architrave, your height measurement should begin at the top of the window sill and end at the edge of the architrave. 1. Measure the drop of your window - bottom to top - in three different places;
How to measure the width of a window?
Measure the width of your window from the edge of the architrave - left to right -in three different places; 3. Compare your measurements and select the largest of the three.
What is a square set window?
A square set is a window without an architrave. For a square set window, you will be fitting your shutters around the window. Measure from the edges of the inside of the window (as if measuring for an inside mount ). Our system will then make the necessary adjustments to allow your frame to fit around the window. 1.
How to measure for bullnose architrave?
Your measurements should start and finish at the edge of the architrave. 1. Measure the drop of your window for the edge of your architrave - bottom to top - in three different places;
What is an outside mounted shutter?
An outside mounted shutter is when the shutter is affixed to the outside face of your window architrave. An outside mount uses an L-frame, and can be fitted to almost any type of architrave or directly onto the wall. Measuring for an outside mount will vary slightly depending on the style of your window. Once you have identified your window type, ...
Where should measurements be taken for architrave?
Your measurements should start and finish at the edge of the architrave. 1. Measure the drop from the edge of your architrave - bottom to top - in three different places; 2. Measure the width from the edge to edge of your architrave - left to right - in three different places; 3.
Where should shutters be measured?
Measurement should start and finish at the edge of the architrave. Depending on the type of architrave, point of measurement may vary slightly. First, you will need to identify the style of architrave.
