The first step to measuring for pinch pleat drapes is to measure the width of the window or door opening. This will determine how wide the fabric needs to be cut. The next step is to measure the height of the window or door opening and divide it by two.
How do you measure for pinch pleats?
0:252:20How to Measure Pinch Pleat Made to Measure Curtains On A PoleYouTubeStart of suggested clipEnd of suggested clipNow measure the drop to measure the drop for pinch pleat heading measure. From directly underneathMoreNow measure the drop to measure the drop for pinch pleat heading measure. From directly underneath the curtain pole rings to the point where you want the bottom edge of the curtain to finish.
How do you calculate pleat width?
To calculate the width of fabric available to form pleats simply subtract the Finished Curtain Width (STEP 2) from the width of the panel to be pleated. You now know how much fabric you have to form pleats (WFP). Next you need to decide how many pleats you want your curtain to have (NP).
How much width of fabric do I need for pinch pleat curtains?
- A pinch pleat curtain requires more fabric to sew in the pleats as it gathers up tighter. As such you will require 2.5x the track width or 150% fullness. Standard window curtains you will use the guide above to decide on the amount of fabric.
How are pleated curtains measured?
0:072:05How to Measure Pencil Pleat Curtains - CurtainsCurtainsCurtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou measure from the inside of the finial which is the fancy end just get that lined up there theMoreYou measure from the inside of the finial which is the fancy end just get that lined up there the inside of the Front's the end at the other end of the curtain.
What is the formula for pinch pleat curtains?
Carolina Custom Draperies notes that you should multiply the total width by 2.5 and record the result. This allows for the proper amount of fullness for the pleated drapes. For example, if the total width is 84 inches, multiply 84 by 2.5 to get 210 inches, the calculated fabric width.
How much space do you need between pinch pleats?
Spaces between the pleats should be 3 1/2 to 4 inches (8.9 to 10.2 cm) and each pleat will use 4 1/2 to 6 inches (11.5 to 15.2 cm) of fabric.
How do you measure curtain width?
The standard curtain width is always 2, 2.5, or 3 times the width of the window. So the formulas used to calculate the width of your curtain is: Standard curtain width = width of window × 2. Deluxe curtain width = width of window × 2.5.
How do I calculate how much fabric I need for curtains?
There's a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).
How many curtain widths do I need?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.
What is the difference between pinch pleat and pencil pleat?
Pinch pleats use more fabric and are fuller than pencil pleats. The pleats are hand-sewn in and permanently fixed for more luxurious, tailored look. As pinch pleat is a fixed, sewn-in heading, it is important that you quote an accurate track/pole width when ordering pinch pleats.
How do I calculate how much fabric I need for a box pleated skirt?
Here is how you can calculate it:Measure your waist. ... Divide your waist measurement by the desired number of pleat. ... Since each pleat takes 3 times its width in fabric, multiple your waist measurement by 3: 25 x 3 = 75 (the fabric you need to make ten 2.5”-wide box pleats).More items...•
How are knife pleats calculated?
Everything about knife pleats is calculated by 3 times the width. If you want a knife pleat measuring 1 inch (2.5cm) you need to calculate 3 inches (7.5cm) of fabric. If you are making your own pattern, a rule of thumb is that a pleat takes 3 times its width of fabric.
How to measure drapery length?
Measure the length of the drapery you will need by starting at the top of the window and measuring down to the point where you want the curtains to end.
How to measure a window?
If there are any casings, include the casings in the measurement. Be sure and measure straight across and not at an angle. Write down the measurement.
How wide should drapes be?
Choose your draperies based on the rod width. For a rod that is 40 to 48 inches wide, choose drapes that are 48 to 50 inches wide. A rod that is 49 to 72 inches wide will require drapes 72 to 75 inches wide. A rod width of 73 to 96 inches wide should have drapes that are 96 to 100 inches. A rod 97 to 120 inches wide needs drapes 120 to 125 inches. A rod that is 121 to 144 inches needs a drape that is 144 to 150 inches wide.
How do pleated drapes help?
Pinch pleat draperies help keep hot sunlight out in the summer and cold air out in the winter. They can also make your windows look larger, especially when hung so that they don't obstruct the window when they're open.
Can you lean against a window when measuring?
Don't lean against the window while taking measurements. It's easy to fall and injure yourself or break the window.
How wide is a pair of pleated drapes?
Pinch pleated drapes on the other hand have the fullness sewn in. So a pair of 48" wide drapes can cover 48".
How wide should curtains be?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.
What is the width of a rod pocket curtain?
The width of rod pocket curtains is stated as the flat out width. You would never use the curtain flat out so keep in mind that a 60" wide panel will not look good if you try to cover a 60" window with it. You need to provide fullness by using multiple panels for a window that size.
How much more material does it take to make a curtain?
On most curtains & window treatments, it takes two to three times more material/curtain to provide the proper fullness in appearance when installed/hanging on rod than the actual window width.
How to measure for pencil pleat curtains?
If you are hanging your pencil pleat curtains from a pole, length should be measured from the underside/bottom of the pole. Or wherever you’d ideally like the top edge of the panel to sit.
How wide should a curtain pole be?
If your drapery pole is 36 inches wide and you order curtain panels that are also 36 inches wide altogether, they will hang absolutely flat with no pleats or gather. If you are looking for less than average fullness and/or to economize on budget, 1.5 times should also be acceptable.
How wide should a drapery pole be?
If your drapery pole is 36 inches wide and you order curtain panels that are also 36 inches wide altogether, they will hang absolutely flat with no pleats or gather. For high level of fullness, order up to three times the width of pole.
How much width is needed for sheers?
Up to three times width is also highly recommended for sheers and lightweight fabrics such as our linens. These fabrics have less body volume and therefore need more width to attain the same full look as fabrics such as cottons and polyesters. More width also helps enhance privacy where sheers are in use.
Do you have to double check curtains?
When it comes to hanging curtains, there’s no room for error. Always double-check your measurements to make sure they’re correct, especially if you’re investing in custom tailored curtains!
Do curtains matter size?
In matters of custom drapery, size does matter. From grommet curtains to pinch pleat drapes, each style has its own nuances when it comes to measuring. Unless you know how to measure and specify accurate curtain sizes, your windows may look less than loved. To help our clients measure curtain sizes accurately for best possible look, our in-house stylists bring you a detailed guide on how to measure curtains. We hope the tips below will help you provide us with accurate specifications for your new curtains from Spiffy Spools. If you have any questions about sizing, please don’t hesitate to contact us at [email protected].
How many pleats on a window curtain?
Tally the number of pleats that will be on the window curtain. For example, there can be six pleats. Divide the window length by the number of pleats, then calculate how big you'd like the pleat to be. Add another few inches for the fold of the pleat. Advertisement.
What do pleats do to curtains?
Pleats make regular curtains look so much more ornamental and can add an accent to a bedroom or living room without too much effort. Certain pleats also add a fuller look to thinner fabrics and can make simplistic rooms look a little bit more formal.
How to make a window curtain look better?
It's always best to calculate a little bit more fabric and cut it off at the side, then hem the curtain or pin and fold it back. The alternative is to calculate too little fabric and have an awkward looking window .
What are pinch pleats?
One of the most common pleats are pinch pleats, and they aren't as complicated or as intimidating to create as they first seem. But making those pleats requires a bit of planning, knowing the right measurements and making sure you have enough material for putting the curtain together and hanging it up on a window. Advertisement.
How to make pleats larger?
If you'd like to make the pleats larger or smaller than the example above, calculate it by multiplying the desired number of pleats to the length of the folds, then add that to the width of the window .
Can pleat guides help you adjust measurements?
To make sure that all of your calculations add up, there are online pleat guides that can help adjust or confirm your measurements.
How wide should a curtain panel be?
If you were making a curtain that was to be 1m wide when it was pleated with a fullness ratio of 2.2 You would need a panel 2.2m wide before you pleated it up to make it 1m wide.
What is the fullness ratio of a triple pleat?
We would use a minimum fullness ratio of 2.5 for triple pleats, If you are using 2.25 we would make double pleats working on approx 6 pleats per width.
How to tell if fabric is half drop?
If you have the fabric already you should be able to measure the vertical pattern repeat and see from the fabric if it is a half drop or not. If not you need to contact the vendor and ask them. This really is basic information they should be able to tell you.
How is fabric ordered?
Fabric is ordered in a length of metres cut from the roll. Before calculating fabric quantities you will need the following:
When a fabric has a pattern, do we have to take into account that the pattern will need to line up?
When the fabric has a pattern we also have to take into account that the pattern will need to line up where we join fabric and the pattern will need to be in the same position on each curtain.
Can you cut trim down to the width?
We would join the trim to the patterned fabric (note the trim fabric will have to include fabric for the join seam with the pattern, side turn and the depth of trim). We would then cut the panel down to the width we required taking excess fabric from the other side not the trim side. Of course your extra trim fabric could be making your panel up to the panel width you want so you may not need to cut it down.
Is a check a pattern?
The check will have a vertical pattern repeat (measure it / the fabric details will tell you). So you treat it as patterned fabric.
