How to Measure Your Windows for Exterior Shutters
- Measure the width of your window
- Divide your window width by 2
- This is typically your shutter width for each window
- Measure the window height – this is your shutter height
How do I choose the right size for my shutters?
Vinyl shutters are available in 12" and 15" standard widths. Custom widths are also available. STEP 2: Measure the height of your window. Measure the height of your window. For the most authentic look, we recommend measuring only the height of the window opening not including any frame or trim around the window.
How do you measure Windows for operable shutters?
Measuring windows for operable shutters requires that you measure both width and height at 3 different points because many windows are not perfectly square. Typically, you will want the shutter to cover some part of the window trim in addition to the window frame and glass.
How do you measure the size of a window?
As each window is not created equal, the measurements you take at the top of the window will vary slightly from the one taken along the bottom. Measure the opening along the top of the window, then measure along the bottom.
How do you measure for a second story window?
The first and second story windows may look the same, but often times are not. - Use a tape measure. Do not use a ruler. STEP 1: Measure the width of your window. For the most authentic look, we recommend measuring only the window opening not including any frame or trim around it.
What is the height of shutter?
Standard vinyl shutters are available in the following heights: 35", 39", 43", 47", 51", 55", 59", 63", 67", 71". It is generally recommend that you go with the closest height available. If your window height falls right between two standard heights, we recommend rounding up to the next available standard size.
How tall should shutters be compared to window?
The height of window shutters you should order is generally the actual height of the opening not counting the sill should you have one; however, many customers prefer to have the panels a little taller than the actual opening height.
How do I know what size shutters to buy?
Shutter Width of Wide Windows It is advisable to select a width size divisible into the window width. Shutter size should be between 25-50% of the window width in order to remain aesthetically pleasing. Never install house shutters that are wider than the window.
Can shutters be taller than window?
When measuring for shutter height, you can add an extra inch or two to make the shutters taller than your windows. This can give added style and enhance the look of your shutters. That said, this is a personal preference and you may prefer to have your shutters be the same height as your windows.
What size shutters are best?
What slat size do most people order for shutters?3 ½” shutter slats are the most popular choice.This lovely kitchen features 2 ½” louvered plantation shutters in a custom color.3 ½” slats let in plenty of light and fit with any style of home décor.More items...•
How do I choose the right shutters?
Shutters should be sized to cover the window if closed and convey the believable appearance of actually being usable even if theyare non-operable. Also, the shutters should mirror image the window. Rails should line up with the lock rail, transom, muntin or other architectural elements of the window.
How are interior shutters measured?
0:142:54How to Measure for Plantation Shutters | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipNeed when measuring for plantation shutters always use a steel tape measure and record the width ofMoreNeed when measuring for plantation shutters always use a steel tape measure and record the width of the window first followed by the height.
Should shutters go on all windows?
Should All Windows Have Shutters? Not necessarily. Double or triple windows should not have shutters. Remember, whether shutters are operational or decorative, the shutter should be big enough to cover the window if the shutters were closed.
How do you measure a window for vinyl shutters?
1:243:19How to Measure for Exterior Vinyl Shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipX here shutters should not exceed the window height measures the height from the top edge of theMoreX here shutters should not exceed the window height measures the height from the top edge of the window trim to the same point at the bottom.
What size should decorative shutters be?
Because your shutters are decorative, and will not be opened or closed they do need to be half the width of the window. We recommend a shutter width about 1/3 of the window.
What is the standard shutter size?
These are available in standard heights ranging from 31" to 80" in 4" increments. There is even a Arch Top version that is available in 14" four board joined shutter that is available in heights from 45" to 94" in four inch increments.
Where should shutters be placed on a house?
Shutters should always be directly against the trim of a window – not floating nearby....Don't Do This | Shutter FailsIf your window doesn't have space on both sides, it's best to skip the shutters.The same can be said for corner windows.And bay windows.
How to measure for shutters?
Measuring Windows For Shutters 1 Look at all the single windows first. 2 I suggest you divide the width of the window opening in half and use that as the width of the shutter panel you would order. 3 This dimension can be reduced by 2" without losing any of the visual effects. 4 If you have very short windows where the height is less than the width, I suggest you divide the width of the window by 4 and order your shutters that width. 5 The relationship between width and height is visually important. So making your panels narrower for those short bathroom windows and they will look appropriate.
How tall should shutters be for double windows?
The height of window shutters you should order is generally the actual height of the opening not counting the sill should you have one; however, many customers prefer to have the panels a little taller than the actual opening height. A couple of extra inches in height can be very attractive. Now for the double, triple and more windows. I suggest you divide the opening width for the double windows by 4 and use that as your panel width.
How tall is a shutter arch?
If you are ordering an optional arch to add onto the top of a shutter panel you will need to subtract the height of arch from the overall finished height you desire. IE. If you want an 84” finished arch panel and the arch alone is 14” then you will need a 70” panel to make the finished shutter arch combination 84”.
How to order shutters for short windows?
If you have very short windows where the height is less than the width, I suggest you divide the width of the window by 4 and order your shutters that width.
How wide should triple windows be?
Triple windows should have the width divided by 6 for an appropriate width to order. Now having said all of this, it's your castle; and you may have a different thought on how the shutters should look. That's OK.
What is an arch shutter?
Arches are a great compliment to a window or door adding an architectural accent that enhances the value of a property in a big way. Arched shutters increase the accent value by completing the look of your arched openings.
How tall are rigid select shutters?
The Rigid Select vinyl shutters remove the guesswork. They are available as an integrated arch one-piece panel. So you would order 84” height as used in the previous example.
How long does it take to measure for exterior shutters?
Expect to spend about 5-10 minutes per window to obtain proper measurements.
How wide should a shutter be for a window?
Windows measuring less than 32 inches wide may use a single shutter that opens to one side. For shallow window openings, measure from the outside left of the window casing, or trim, to the outside right. Divide this measurement by two for the individual shutter width. Measure Window Height.
What is composite shutter?
Composite shutters can be installed with functional hardware, but have a flat non-decorative back, which will be visible when the shutters are rotated over the window in a closed position. All styles of composite exterior shutters are heavier than their wood counterparts.
What is the difference between vinyl and polypropylene shutters?
There is a slightly different process to measure for vinyl shutters. Polypropylene shutters are sold in fixed widths at various intervals. They also have a different installation method to consider.
Do composite shutters need hinges?
All styles of composite exterior shutters are heavier than their wood counterparts. Composite shutters may need additional hinges to support the additional weight. Exterior windows have many variables (siding material, casing width, etc.) which results in a modified approach to each application.
Can exterior shutters be installed to swing open and close?
Solid exterior shutters, in conjunction with quality outdoor hardware, can be installed to swing open and closed. Measurements of each window for functional exterior shutters need to be made with great precision to ensure a smooth installation. Multiple openings that appear to be the same size can often be very different.
Can shutters be installed in a permanent position?
Wood or composite shutters that will be installed in a permanent position can afford to be approximate in relation to the window size. This type of stationary installation can be accomplished with screws or bolts. Decorative panels may still look functional if they are installed with authentic shutter hardware.
Measuring for Aesthetic Mounted Shutters
To determine shutter width, measure the closed shutter pocket width and divide by two. This number will determine the width of each shutter for that window. For Bahama styles, shutter width is equal to the actual shutter pocket less ½ inch.
Measuring for Functional Shutters
Shutter Width (Round down to the nearest ⅛ inch) = Closed Shutter Pocket Measurement less ½″ clearance ÷ 2
What is the high point of a radius top shutter?
Existing radius top shutter: The “high point” of a radius top shutter (also known as the “long side”) is the length from the bottom (B) of the shutter to the tip of the shutter’s arch (A). The “high point” will always equal the shutter length.
How to measure a window?
As each window is not created equal, the measurements you take at the top of the window will vary slightly from the one taken along the bottom. Measure the opening along the top of the window, then measure along the bottom.
Why are shutters important?
The size of the shutters helps you plan your budget, as shutter pricing is based on the amount of materials needed. Plus, you’ll get to know your house just a little better. One window might be a slightly different size than another. That’s not a problem, but it does give one more example of why getting custom-fit shutters is so important ...
What is the high point of a window?
Here are the measuring guidelines for arched and circle top windows: The “high point” of a radius top window (also referred to as the “long side”) is the length from the bottom of the window (B) to the tip of the shutter’s arch (A). The low point (also known as the “short side”) begins at the bottom of the window ...
How many half circles are there in a shutter?
The top of each shutter will be exactly one half of a circle.
Can you match shutters on a house?
Sometimes, homeowners want to match existing shutters on their home or additional buildings. If your stile and rail dimensions are different than our standard offerings, that’s okay. We frequently customize these elements for these types of situations.
Measuring for Shutters
At Millwork Traders, we make it easy to order custom window shutters in any size you need for your home. We love offering this flexibility to our customers, but we understand that the ordering process can be tricky if you’re not sure how to measure for window shutters.
Measuring for Aesthetic Mounted Shutters
To determine shutter width, measure the closed shutter pocket width and divide by two. This number will determine the width of each shutter for that window. For Bahama styles, shutter width is equal to the actual shutter pocket less ½ inch.
How wide should a vinyl shutter be?
For the look of functioning shutters, panel width should be about half the width of the window. However, non-functional decorative exterior vinyl shutters will never be closed over windows and are installed only as decorative accents to improve ...
What is a straight top shutter?
A standard straight top has square corners and horizontal top. Arched top shutters have a straight edge on one side and a curved slope on the other. A springline dimension is required to order arch top shutters. Ascertain the springline by measuring from the top of the window down to the start of the arch.
How many colors of molded through vinyl shutters are there?
Choose from 19 standard molded-through exterior vinyl shutter colors. If none of the colors meet your project requirements, select the DIY paintable version to finish yourself.
Is a bay window too wide?
Large or bay windows are often too wide to use panels that appear to be functional , so often a smaller panel is appropriate.
Can you use screws on vinyl shutters?
Spikes are recommended for hard surfaces like masonry, brick, stucco or hardboard. Only screws can be used with board and batten shutters. Siding.
What is an outside mount shutter?
Outside mount refers to the mounting of a shutter outside a window opening. Outside mount shutters can be installed
What is a frame in shutters?
A frame is the piece that surrounds shutter panels and creates support for them. It is the piece that is screwed onto the
Do you have to account for every frame side in your final dimensions?
Essentially you must account for every frame side in you final dimensions.
