- Using your measuring tape or a ruler, begin with the lip, or edge, that sits on the kitchen countertop. If you have an...
- Measure the length of your sink by placing the edge of your tape measure on the left edge of the sink and stretching it...
- Measure the sink width by placing your tape measure at the back edge of the sink (closest to the kitchen faucet) and...
How do you measure for a new kitchen sink?
Use a tape measure to learn the side-to-side width and the front-to-back length of the sink you are replacing. After that, measure height and depth. Keep in mind that these are two different measurements. Measure the height of your old sink on the sink's exterior, top to bottom.
How to measure for kitchen cabinet cut-out?
Inside the cabinet there is a cut-out, you need to measure the size of the cut-out. The main thing here is that you will have to go under the sink to do this. You will have to start measuring from the top left corner from the underside of the sink. Now measure from the top left corner of the cabinet to the top on the opposite side.
How to measure for an undermount sink?
The following dimensions need to be taken in order to describe an undermount sink completely: You need to use the right tools to measure the dimensions of any object. Place the measurement tape along the length of the kitchen sink. Make sure you measure from the left to the right edge and cover the entire length of your sink.
Why is it important to measure a sink before buying?
The measurement you got will give you an idea of the size of the new sink to buy when you visit the store. Getting the correct measurement of the sink before going to buy a new one is the right thing to do. You need the right tools so that you make mistakes in calculations or assume the wrong sink size.
What is cutout length for kitchen sink?
Standard Kitchen Sink Cutout Sizes Typical kitchen sinks measure 18 x 18 x 12 inches or more. A kitchen sink could have up to two compartments in a household setting. Such as sink can measure up to 36 inches.
How do you measure and cut a hole in a kitchen sink?
1:498:29How To Cut a Hole For A Sink In A Laminate Countertop - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo just take the scissors out. And cut out the overall template. So since we will be cutting. On theMoreSo just take the scissors out. And cut out the overall template. So since we will be cutting. On the laminate side of the countertop. What I want to do is just place the tape.
What part of the sink do you measure?
Depth. Place a straight-edge across the top of the old sink. Insert a ruler into the sink, and position its bottom end beside the drain. Measure from the bottom of the sink to the straight-edge to get the depth of the sink.
How do I create a sink cutout template?
1:349:02How To: Template Your Existing Sink and Countertop - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo there's no any amount of slack in the paper we want a tight fit across the entire. Paper. So i'mMoreSo there's no any amount of slack in the paper we want a tight fit across the entire. Paper. So i'm going to use scotch tape you can use masking tape scotch tape.
What do I do if I cut the hole too big for my sink kitchen sink?
You have to buy a new counter and make the right size hole, or buy a larger sink to fit the hole (which you will have to cut again anyway). First of all, the sink needs sufficient support around its perimeter for clamping, sealing and support.
How do you measure a sink grid?
Using a tape measure, begin at the bottom of the sink walls just above where the walls start to curve inward toward the drain. Measure the width side to side from that point to the mirroring point on the other side of the sink. Repeat the same steps to measure the depth, front to back. You now have the width and depth.
What size sink goes in a 30 inch cabinet?
A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide. The average 24″ sink base cabinet comfortably accommodates a standard 22″ sink; be sure to consider the depth of your sink when planning storage inside the base cabinet.
How do you measure an undermount sink for replacement?
0:211:35How to Measure for an Undermount or Farmhouse Kitchen Sink InstallationYouTubeStart of suggested clipEnd of suggested clipStart by measuring the length of the base cabinet consult the specification sheet before selecting aMoreStart by measuring the length of the base cabinet consult the specification sheet before selecting a sink to ensure it will fit in your base cabinet.
What is the standard opening for a kitchen sink?
The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length. The bulk of what you find while shopping will fall within this size range. Generally, sinks up to 30" will contain one large single bowl.
How do you cut a hole in a porcelain sink?
Place either a ceramic drill bit or a diamond-tipped hole saw into the drill chuck. A ceramic bit is easier to control as it acts much like a regular drill bit. A diamond-tipped hole saw gives you a smoother entry hole when the job is finished.
How do you cut a sink for cabinets?
2:237:20Installing your sink base cabinet( Cutting Holes For Plumbing)YouTubeStart of suggested clipEnd of suggested clipYou want to make sure you line everything up to get this perfect. So I'll mark off everything thatMoreYou want to make sure you line everything up to get this perfect. So I'll mark off everything that goes across and everything that goes down in order so one point is four inches across 16.
How do you measure an undermount sink for replacement?
0:211:35How to Measure for an Undermount or Farmhouse Kitchen Sink InstallationYouTubeStart of suggested clipEnd of suggested clipStart by measuring the length of the base cabinet consult the specification sheet before selecting aMoreStart by measuring the length of the base cabinet consult the specification sheet before selecting a sink to ensure it will fit in your base cabinet.
How do you measure to replace a sink?
Measure the length, width, and depth of the sink. Then, measure the length of the cabinet.
How are top mount sinks measured?
For a top mount sink, you need to measure the cutout as well as the sink to ensure that your sink matches your current look while also fitting in t...
What is the standard kitchen sink size?
Most kitchen sinks are 30” or 33”.
How do you measure for an under counter sink?
Undercounter sinks do not require the additional step of measuring the cutout since they match the size of the cutout perfectly.
What You Need To Know About How To Measure A Sink
It can be helpful to understand standard kitchen sink sizes before measuring yours.
How To Measure A Sink (7 Step Guide)
To prevent accidental water damage, turn off the water to your kitchen sink before measuring it. You can do this at the shutoff valve on the sink or the shutoff valve at your main line .
Before You Measure
Since each sink is measured slightly differently, it is important to know what type of kitchen sink you have currently. If you would like to learn more about these types, read our " How to Choose a Kitchen Sink " guide.
Step 1: Determine Your Project Scope
Are you replacing a kitchen sink with the same installation type you currently have or are you trying a new style? Knowing this will change how you measure your kitchen sink.
Step 2: Measure Your Current Sink
Measure the length and width of your countertop's existing cutout along with the depth of your old sink. If you currently have a drop-in sink, you may need to go into the cabinet under the sink to measure the opening from below. Measuring the drop-in sink's basin from above will not accurately show how big the countertop opening is.
Step 3: Measure Available Width and Length
Your under-cabinet and kitchen countertop space will determine how big your new sink can be. To find your countertop's usable surface space, measure from the front edge of your countertop to the wall, accounting for the thickness of any backsplash. This is the widest your new sink can be.
Step 4: Measure Sink Depth and Cabinet Depth
Lay a level or straightedge across the top of your sink. Measure from the deepest part of your sink to where the measuring tape and straightedge meet. Most sinks do not have a flat bottom to allow for better drainage, which is why it is important to note the deepest part of your sink.
Measuring an Old Sink
Measuring an old sink is necessary for many purposes like replacing it with a new one or Installation of a new countertop. No matter what the task is, you will be able to carry it out with grace just keep reading.
Extra tips you should keep in mind
One more thing that you might have to calculate is the lip width in some cases. Mostly this will be for top-mounted sinks and drop-in sinks. These lips tend to extend from the basin to the countertop.
How to measure the Countertop Hole?
It is recommended that one should always ask for help while removing the old sink as they can be very heavy and you diligently do not want to damage it. It is better to ask for help to get into awkward situations and face losses and injuries.
How to measure a sink for a new countertop installation?
Many sinks come with a template that can be helpful and you can use them. These templates can sit on the counter that you can use a pencil to trace.
Taking Measurements
Correct measurements are imperative for seamless installation. If you end up cutting a too-large hole in your countertop, you’ll run into a world of issues as your sink will not fill the gap entirely, and you’ll need a new slab of the countertop.
Measuring For The Hole
Once you have your list of sink dimensions, you can proceed to the next step, which is slicing a hole in the countertop in question. Before you start chopping away at the countertop, you need to do a few calculations.
Measuring An Undermount Sink For Replacement
Over time and with heavy use, kitchen sinks become worn out. If you need to replace your old sink entirely, it is usually easiest to remove it and get your measurements. Sinks with a wide lip may leave a greater available width, so ensure that you correctly measure the sink before purchasing a replacement.
What Size Undermount Sink Do I Need?
If you’re replacing your current sink, you’ll need to find a sink that meets the existing space. When determining what size of undermount sink you need, it’s essential to consider several additional factors that may impact your decision.
How Are Undermount Sinks Installed?
Unlike other sink types, like drop-in sinks that support themselves on the countertop, undermount sinks require more work. As the name implies, the sink is attached beneath the countertop.
How to measure the width of a kitchen sink?
First , add the measurement of the sink lips for the left and right side. Subtract this from the length measurement you took earlier. Repeat this same process for the width of the sink. Subtract the rim measurement for the front and back ends from the total width.
How to measure the length of a sink?
Then place on the end of the measuring tape on the one edge of the sink. Ensure that the tape gets to the outside rim of the sink on that side.
How wide are undermount kitchen sink drains?
Are undermount kitchen sink drains universal? Just as the sinks are universal, so are the sink drains. In most cases, they measure three and a half inches wide. It does not apply to the undermount sinks alone, but it is also similar to the other types of sinks. The drains are also available in a wide variety of finishes.
What is the lip of a kitchen sink?
The “lip” of the sink refers to space in between the countertop edge and the edge sink edge. In most kitchen sinks this is usually not more than 1 inch in length. For an undermount, it is important that you measure the width of this rim.
How wide is a sink pipe?
The largest sink can accommodate a waste pipe of up to forty millimeters wide. Such types are mostly for use in large installations such as the washing machine and food waste disposal units in factories and homes.
How wide is an overflow pipe?
An overflow pipe can be twenty-one and a half millimeters wide. Such waste pipes begin from the cistern, then condenses drains from the boilers. If the undermount basin is large, then you will also need a large drain pipe. I would recommend a thirty-two-millimeter wide waste pipe.
How deep are kitchen cabinets?
Yes, on average, most cabinets measure about twenty-four inches deep by thirty-six to forty-two inches high and twenty-five and a half to twenty-six inches wide. These cabinets can accommodate a standard twenty-two by thirty-three-inch size sink.
Before You Begin
When learning how to measure a kitchen sink for replacement, first you need to know what type of sink you currently have. There are three main types of sinks: undermount sinks, drop-in sinks and farmhouse sinks.
Measure Your Kitchen Sink
When learning how to measure kitchen sink size, you may need to make some adjustments for your type of sink. Below we cover standard kitchen sink measurements, plus tips for how to measure undermount kitchen sinks and farmhouse kitchen sinks.
Measure Your Cabinet
Now that you have your kitchen sink measurements, measure your cabinet space. When replacing a sink, it’s important that your new kitchen sink be the same bowl size (sink width and sink depth) of your current sink. Otherwise, you may have to replace your cabinet too.
Remove the Old Sink and Measure the Cutout
You will need to remove your old sink to take this set of measurements. When doing so, be sure to shut off water valves that lead to the sink, disconnect the water lines and remove the faucet. Then disconnect the drain attachments and remove the sink.
How to measure for a replacement sink?
You want to buy a replacement sink with the same length, width and height of your current sink. So those are the sink measurements you take. Use a tape measure to learn the side-to-side width and the front-to-back length of the sink you are replacing. After that, measure height and depth.
How to measure for drop in sink?
If you want to have a drop-in sink, you'll need to measure your vanity's countertop space to figure out how large the sink can be. First, measure from the front of the vanity to the back wall. Then, measure the distance across the top of the vanity for length. Keep in mind that you need to leave between 4 and 6 inches of counter space on each side ...
How wide is a round sink?
The dimensions of round sinks are mostly 16 to 20 inches in diameter. Rectangular sinks are usually 19 to 24 inches wide and 16 to 23 inches front to back. Bathroom sink depth tends to be 5 to 8 inches.
What do you need to coordinate a new sink with?
You'll need to coordinate your new sink with other elements of your bathroom, including its design and style. More importantly, you must select a sink that will fit into your bathroom.
How big is a round bathroom sink?
If it is a standard bathroom sink size, finding one that will fit won't be a problem. The dimensions of round sinks are mostly 16 to 20 inches in diameter.
