If you’re interested in measuring for inside mount blinds, follow these steps:
- Measure the depth of your window frame. ...
- Measure the width of your window at the top, middle, and bottom of your window opening and circle the narrowest measurement of the three - this will be the number you submit for your window’s width. ...
- Measure the height of your window opening in three places: left, center, and right. ...
- Measure the inside of the window frame in three places for width: across the top, middle and bottom. ...
- Measure for height: at the left, middle and right side. ...
- Measure the depth of the window so you know how deep the blinds can be.
How much space is needed for inside Mount blinds?
Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.
How to measure for inside Mount vertical blinds?
When measuring for vertical blinds, it’s important to remember a few key things:
- A steel tape measure is much more accurate than cloth measuring tape.
- Always measure to the nearest 1/8 inch. ...
- Be careful when writing down measurements. ...
- Blinds can either be mounted inside or outside the window frame. ...
- When measuring for inside mount blinds, always record the actual window opening size when you order. ...
How to install inside Mount blinds?
How to Install Inside Mount Blinds or Shades
- Position the first bracket in the upper corner of the window frame so that it's level with the wall's surface. ...
- Mark the screw locations with a pencil.
- Repeat steps 1 and 2 with the second bracket in the opposite corner of the window frame. ...
- Use a steel tape measure or a level tool to ensure the two bracket locations are even.
How to install inside Mount Aluminum blinds?
How to Install Aluminum Blinds
- Prepare Brackets. Open the front of the bracket by pressing on the bottom of the bracket to release the locking tab while locking the front gate.
- Mark the Location. Position the box brackets at each end of the headrail. ...
- Bracket Installation. Screw brackets into wall as shown. ...
- Valance Clip Installation. ...
- Blind Installation. ...
- Operating Your Blind. ...
How to measure for blinds?
Why are window dressings important?
What is the proper measurement for blinds?
What are some examples of small details?
How to measure for inside mount blinds?
Who is Coral Nafie?
See 1 more
How do you measure window depth for inside mount blinds?
0:091:33How to Measure Window Depth for Blinds and Shades - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the edge of the window casing. Be mindful of obstructions. Such as levers latches or hand cranksMoreAnd the edge of the window casing. Be mindful of obstructions. Such as levers latches or hand cranks that may impede or obstruct your window treatment.
What is mounting depth for blinds?
3⁄4" is the minimum depth required for inside mount blinds.
How do you measure window depth?
Finding the correct depth is important because some windows will be too deep to fit into a replacement window opening. Run a tape measure from the outside of the frame to the inside and take the measurement from edge to edge of the window frame.
How do you measure inside Mount cellular blinds?
0:541:57How to Measure Windows for Inside Mount Cellular Shades | Blinds.comYouTubeStart of suggested clipEnd of suggested clipBegin by measuring the inside width of your window opening in three places. Top middle and bottomMoreBegin by measuring the inside width of your window opening in three places. Top middle and bottom after recording your three measurements. Select the narrowest one.
What does mounting depth mean?
Mounting depth is defined as the dimension from the front of the front rack angle to the back of the back rack angle. Many racks have adjustable mounting depth so it's best practice to ensure that the rails being used for all the equipment will fit the depth of the rack.
How much should I subtract for inside mount blinds?
Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8" for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4" - 1/2".
How do you measure window depth for replacement?
0:070:45How to Measure for Replacement Windows - YouTubeYouTubeStart of suggested clipEnd of suggested clipThree places always make sure your measurements are taken from between the inside of the jamb onMoreThree places always make sure your measurements are taken from between the inside of the jamb on each side of the three measurements you always choose the smallest.
How far should blinds stick out?
A typical 2 inch window blind needs a minimum of an inch and a half but at least 3 inches for a flush mount. A flush mount blind is on that is completely recessed in the window frame and nothing is protruding out of the window frame.
What is frame depth on a window?
Usual Depths. Most frame depths range between 1.8cm (18mm) and 3cm (30mm) Measure the Width. Using a metal tape measure, measure the width of the visible glass in three places. Use the smallest measurement as your width.
How deep are cellular blinds?
Most of our cellular shades can be mounted with as little as 1 inch window frame depth. Some with as little as 3/4 of an inch depth, however, windows with less than at least 2 inches will not be deep enough to contain the entire cellular shade and a portion will extend past the front edge of the window frame.
How much space on each side of blinds inside Mount?
Factory Deductions: Inside mounted products have a light gap between 1/8” and 1/4” on either side of the window – this gap is required in order for the product to operate properly.
What does flush mount depth mean?
Flush Inside Mount means the entire shade fits within the window frame. In other words, if you were to run your hand along the wall or window frame, your hand would not bump into the shade. The minimum window frame depth required for a flush mount is 2 1/4″.
What does minimum inside Mount depth fully recessed mean?
The fully recessed inside mounting depth is the amount of space needed for the shade to be installed and not protrude beyond the window molding.
How much space on each side of blinds inside Mount?
Factory Deductions: Inside mounted products have a light gap between 1/8” and 1/4” on either side of the window – this gap is required in order for the product to operate properly.
How much of a gap should I leave for blinds?
Not Adding Width To Outside Mount Blinds We recommend going at least 2" wider than the opening on either side, so 4" total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.
Where are outside blinds mounted?
Outside mounted blinds are mounted on the wall outside the window frame . This is not the preferred method, but an insufficient window depth may require this type of mounting.
How to measure a recess?
Measure for width. Measure the width of the recess in three places: at the top, at the middle, and at the bottom. Make sure you hold both ends of the tape on the inside edges of the recess. Note the smallest measurement, as it will be the one you use. Measure for height.
How to measure window recess height?
Measure the height of the window recess three times: at the left, in the center, and at the right. Make sure you hold both ends of the tape on the inside edges of the recess. Note the longest measurement, as it will be the one you use.
What is inside mounted blinds?
Inside mounted blinds are mounted inside the window frame for a neater look. This is the most popular method, if the window depth allows it. Be sure to measure accurately. If the window is set in a deep recess, fitting the blind inside makes for a neat finish.
How many times has wikihow been viewed?
To create this article, 9 people, some anonymous, worked to edit and improve it over time. This article has been viewed 87,335 times.
Can you have a 4x8 header?
Yes, you can. There should be a 4x8 header beam that runs above the entire length of the window.
How to measure window width?
Start by measuring the width of your window inside the frame in 3 places - top, middle and bottom. Record each of these on your worksheet. Circle the narrowest of these measurements. That'll be the width you use when you order.
What is the number to call for blinds on doors?
It's best to give us a call at 800-505-1905 for designer help on this one. Blinds for Doors - Depending on your trim and door size, there are a few other things to consider when you measure for blinds on doors. Bay Window Blinds - Some bay windows have angles that cause blinds to intersect of not ordered properly.
Where are blinds mounted on a window?
With an inside mount the blinds are mounted inside the window frame with the brackets screwed into the top of the casing. For an outside mount, the blinds are mounted to the front of the window frame or the wall above the window. Outside mount blinds or shades will need to be larger to cover the entire window frame.
What are the considerations for custom draperies?
Draperies - There are several other considerations with custom draperies like fullness, how much of the window you want exposed, puddling and more.
How much to add to window opening?
Also add 3 1/2 inches to the top. In total you'll be adding about 6 1/2 inches to the height of your window opening.
Why use an inside mount?
In 90% of cases we recommend an inside mount. It gives a cleaner look, shows off your window casing, and will block more light.
How to contact Blinds.com?
If you have any questions, or want someone to guide you through the process, Blinds.com designers are available to help at 800-505-1905. We also have great videos that you can follow along with as you're measuring.
Are Your Windows Deep Enough to Install Blinds?
If this is your first-time ordering blinds or shades you might be asking “Why does depth matter?” Depth refers to the amount of space inside a window opening (from front to back) where the blind will be installed. It’s super easy to measure.
How to stop headrail from protruding from window?
To stop the headrail from protruding from the window you will need to the check Fully Recessed Minimum Inside Mount Depth requirement. This is the depth required for the blind valance, cassette or headrail to be flush with the window opening. The image below shows a partially recessed blind which sticks out beyond the window opening.
What type of blinds are best for shallow windows?
Remember, all products have different depth requirements, so you also may be able to switch to another style that'll work for your window. Cellular Shades and Mini Blinds are great for shallow windows as they require the least depth out of any product.
How to measure for a window bracket?
Measure using a steel tape measure down to the nearest 1/8th inch. Extend the tape measure into the window as far back as it can go at the top of the window where the brackets will be installed. Be sure to check the rest of the window opening for window cranks or handles. If one is present, measure from the obstruction to the edge of the window frame. If your windows are beveled, measure the flattest and largest section of the beveling.
When mounting blinds inside the window frame, do you need to check the depth?
When you’re going to mount your blinds or shades inside the window frame, you first need to check your window depth. If your window is not deep enough your blind might not fit- and that’s frustrating, right?
Who is Ashley from Blinds?
Ashley is a Blinds.com Social Media Specialist. A weekend-warrior, she and her husband spend their time fixing up their townhome together. She is an artist and DIY craft fanatic who has converted her dining room into a tiny studio where she hangs out with her two assistant-cats. Sci-fi books, video games and hula hooping are also her jam. Follow her on Instagram @Adenn.fox or Youtube.
What About Depth?
Depth is the distance from the window pane to the edge of the window. Be sure that enough depth is available from pane to edge of the trim to mount the blinds inside it.
What About Brackets?
Each order will include brackets to mount the headrail to the window frame. We recommend using the hardware provided for your installation.
What are the dimensions of a window?
Measure and record these 3 dimensions in that order. Width is horizontal (across the window), height is vertical (up and down), and depth will be a few inches straight back into the window pane.
What is flush mount blinds?
What is Flush Mount. If you want to mount your blinds on the inside then space is needed and the question that floats around is how much space or depth is needed. Your windows must meet the depth requirements to help accommodate the brackets and headrail of your blinds.
What are the differences between inside mount blinds and outside mount blinds?
This is an important consideration because the mount type will heavily influence your measurements and fit of the blinds. Inside mount blinds are mounted on the inside of the window frame. They look neat, sleek and smart. Outside mount blinds are mounted outside the window frame covering the whole window and few inches of the wall around the window opening.
How deep should I install blinds?
While the ideal depth is between 1 and 5 inches, the depth needed depends a lot on the style of window treatment that you have chosen for the windows. If you have opted for smaller window blinds like aluminum mini blinds or cellular shades, they will need as less as 7/8 of an inch for a perfect snug fit and will not protrude out either. However, the story will be different for large window treatments like wood blinds or vertical blinds that need more space to make a good fit that will also be aesthetically pleasing. Some of these blinds may need up to 6 inches for a “flush mount”.
What are blinds used for?
Blinds are a popular window treatment in the market and they come packed with features and goodness. They help to address the varied needs of your house. The need for energy-efficiency, need for privacy and protection from the prying eyes of the neighbors, need for control over light to enable diffused light to stream through while cutting out the glares and the harmful UV rays. There are blinds that come with room darkening and blackout features hence allowing you to block out light significantly from your rooms for better sleep or entertainment experience. Some come with dual features for greater versatility and functionality. Apart from making your homes more liveable, window blinds add a touch of grace, elegance and aesthetic appeal to the windows, rooms and your room decor style.
How much space do vertical blinds need?
Some of these blinds may need up to 6 inches for a “flush mount”.
Where are inside mount blinds mounted?
Inside mount blinds are mounted on the inside of the window frame. They look neat, sleek and smart. Outside mount blinds are mounted outside the window frame covering the whole window and few inches of the wall around the window opening.
Inside Mount vs. Outside Mount Blinds and Shades
Looking for the perfect fit for new window treatments? It all starts with an accurate measurement. Most hardware packages come with everything you need for installation in wood or drywall. For metal or masonry, make sure you have the right drill bits and the appropriate screws for installing window treatments.
How to Measure for Inside Mount Blinds and Shades
When you're measuring for inside mount blinds, accuracy is key. Fortunately, you can get measurements in three simple steps:
How to Measure for Outside Mount Blinds and Shades
When you're measuring for outside mount blinds, allow for enough wall space to accommodate the mount. Here’s how to get accurate measurements:
Blinds and Shades Measuring Tips
Decide if you want an inside mount or an outside mount before you begin the measuring process. If you aren't sure, take measurements both ways and then choose blinds that appeal to you.
How to measure for blinds?
Measure the width of the window opening in 3 places—at the top, in the middle and along the bottom edge or sill. Use the measurement to within 1/8 inch. You'll use the narrowest of these three measurements for your inside-mount blind width.
Why are window dressings important?
Because of their utilitarian function , window dressings are often overlooked for their value in accenting or creating a beautiful home aesthetic. But the fact is that even the simplest window dressings offer a variety of opportunities to play with the small details that can make a nice room into something breathtaking. Window blinds are a great example of a small detail that can have a big impact. With or without draperies, window blinds offer light control and privacy to any room, but they can also be a source of beauty—particularly the "inside mount blind" that has no external mounting and appears to emerge directly from within the window.
What is the proper measurement for blinds?
The proper measurement would be "width x height. ". If you are not sure about how to make accurate measurements, you'll want to pay to have someone from the blind company come to your home to measure. If you provide your own measurements, you'll be responsible if the blinds do not fit.
What are some examples of small details?
Window blinds are a great example of a small detail that can have a big impact. With or without draperies, window blinds offer light control and privacy to any room, but they can also be a source of beauty—particularly the "inside mount blind" that has no external mounting and appears to emerge directly from within the window.
How to measure for inside mount blinds?
For an "inside mount blind" you must determine if there's enough room to install a blind and its heading in the window opening. If the edge of the window is flush with the wall, you'll need to use an outside mount blind. Measure the width of the window opening in 3 places—at the top, in the middle and along the bottom edge or sill.
Who is Coral Nafie?
Coral Nafie is a writer and expert on home decorating. She's an author of an interior design book and has 25+ years of decorating experience. Because of their utilitarian function, window dressings are often overlooked for their value in accenting or creating a beautiful home aesthetic.
